Development of environment-friendly oil-in-water emulsion based drilling fluid for shale gas formation using sunflower oil

Abdo, 2015, Effects of tribological properties of water-based drilling fluids on buckling and lock-up length of coiled tubing in drilling operations, Tribol. Int., 82, 493, 10.1016/j.triboint.2014.01.028 Abdou, 2011, Effect of particle size of bentonite on rheological behavior of the drilling mud, Petrol. Sci. Technol., 29, 2220, 10.1080/10916461003663065 Abduo, 2016, Comparative study of using Water-Based mud containing Multiwall Carbon Nanotubes versus Oil-Based mud in HPHT fields. Egypt, J. Petrol., 25, 459 Ahmad, 2018, High molecular weight copolymers as rheology modifier and fluid loss additive for water-based drilling fluids, J. Mol. Liq., 252, 133, 10.1016/j.molliq.2017.12.135 Akintola, 2014, Analysis of filtration properties of locally sourced base oil for the formulation of oil based drilling fluids, Sci. Afr., 13, 171 Amani, 2012, Comparative study of using oil-based mud versus water-based mud in HPHT fields, Adv. Petrol. Explor. Dev., 4, 18 Aqwu, 2015, A comparative study of diesel oil and soybean oil as oil-based drilling mud, J. Pet. Eng., 2015, 1 Aston, 1998, 55 Aveyard, 2003, Emulsions stabilised solely by colloidal particles, Adv. Colloid Interface Sci., 100–102, 503, 10.1016/S0001-8686(02)00069-6 Brandon, 1993, The effect of cathodic currents on friction and stuck pipe release in aqueous drilling muds, J. Petrol. Sci. Eng., 10, 75, 10.1016/0920-4105(93)90032-A Bui, 2012 Bybee, 2004, Drilling fluid strengthens wellbore, J. Petrol. Technol., 56, 59 Caenn, 2011 Daan, 1996, Environmental effects of a discharge of drill cuttings contaminated with ester-based drilling muds in the North sea, Environ. Toxicol. Chem., 15, 1709, 10.1002/etc.5620151009 Dosunmu, 2010, Development of environmentally friendly oil based mud using Palm-oil and groundnut-oil, 1 Fink, 2015 Foxenberg, 2008 Ghavami, 2018, Experimental study on microstructure and rheological behavior of organobentonite/oil-based drilling fluid, J. Mol. Liq., 263, 147, 10.1016/j.molliq.2018.04.137 González, 2011, Effects of interactions between solids and surfactants on the tribological properties of water-based drilling fluids, Eng. Asp., 391, 216, 10.1016/j.colsurfa.2011.04.034 Griffith, 1999, Effect of drilling fluid filter cake thickness and permeability on cement slurry fluid loss, J. Can. Pet. Technol., 38, 42, 10.2118/99-13-15 Hammadi, 2014, Effect of polyethylene oxide (PEO) and shear rate on rheological properties of bentonite clay, Appl. Clay Sci., 99, 306, 10.1016/j.clay.2014.07.016 Harrington, 1985, Transesterification in situ of sunflower seed oil, Ind. Eng. Chem. Prod. Res. Dev., 24, 314, 10.1021/i300018a027 Huang, 2018, An alternative method to enhance w/o emulsion stability using modified dimer acid and its application in oil based drilling fluids, RSC Adv., 8, 26318, 10.1039/C8RA02293C Huang, 2018, Application of core-shell structural acrylic resin/nano-SiO2composite in water based drilling fluid to plug shale pores, J. Nat. Gas Sci. Eng., 55, 418, 10.1016/j.jngse.2018.05.023 Hunter, 2008, The role of particles in stabilising foams and emulsions, Adv. Colloid Interface Sci., 137, 57, 10.1016/j.cis.2007.07.007 Jensen, 2004, Application of water based drilling fluid-total fluid management, IADC/SPE Drill, 10.2118/87103-MS Jha, 2013, Study the rheological and filtration properties of oil-in-water emulsion for its application in oil and gas well drilling, J. Petrol. Eng. Technol., 25 Jha, 2014, Emulison based drilling fluids: an overview, Int. J. Chem. Res., 6, 2306 Jha, 2016, Developement of emulsion based drilling fluid System for fractured reservoirs, Int. J. Chem. Res., 6, 146 Kadajji, 2011 Kamal, 2014, Review on polymer Flooding : rheology , adsorption , stability , and field applications of various, Polymer Syst. Kania, 2018, Nonionic polyol esters as thinner and lubricity enhancer for synthetic-based drilling fluids, J. Mol. Liq., 266, 846, 10.1016/j.molliq.2018.07.014 Keren, 2003, Anionic polyacrylamide polymer adsorption by pyrophyllite and montomorillonite, Clay Clay Miner., 51, 334, 10.1346/CCMN.2003.0510310 Khayat, 2012, Viscosity-enhancing admixtures and the rheology of concrete, 209 Kumar, 2017, Emulsification of Indian heavy crude oil using a novel surfactant for pipeline transportation, Petrol. Sci., 14, 372, 10.1007/s12182-017-0153-6 Kumar, 2003, Behaviour of organic polymers on the rheological properties of Indian bentonite-water based drilling fluid system and its effect on formation damage, Indian J. Chem. Technol., 10, 525 Kumar, 2015 Kumar, 2019, A novel oil - in - water drilling mud formulated with extracts from Indian mango seed oil, Petrol. Sci. L, 2014, Investigating alternatives to diesel in oil based drilling mud formulations used in the oil industry, Environ. Earth Sci., 14, 70 Lam, 2015, Rheological properties of PHPA polymer, Support Fluids, 27, 1 Liu, 2018, Synthesis and characterization of comb-shaped copolymer as a filtration reducer and comparison with counterparts, RSC Adv., 8, 11424, 10.1039/C7RA13255G Luo, 2014, A new completion methodology to improve oil recovery for horizontal wells completed in highly heterogeneous reservoirs, Arabian J. Sci. Eng., 39, 9227, 10.1007/s13369-014-1417-8 Madruga, 2018, Effect of ionic strength on solution and drilling fluid properties of ionic polysaccharides: a comparative study between Na-carboxymethylcellulose and Na-kappa-carrageenan responses, J. Mol. Liq., 266, 870, 10.1016/j.molliq.2018.07.016 Mahto, 2004, Rheological study of a water based oil well drilling fluid, J. Petrol. Sci. Eng., 45, 123, 10.1016/j.petrol.2004.03.008 Melton, 2000, Offshore discharge of drilling fluids and cuttings- A scientific perspective on public policy, Rio Oil Gas Expo Conf, 1 Nasiri, 2018, Application of new eco-friendly LCMs for combating the lost circulation in heavy-weight and oil-based mud, RSC Adv., 8, 9685, 10.1039/C7RA13668D Navarrete, 2000 Neff, 2000, Environmental impacts of synthetic based drilling fluids, U.S. Dep. Inter. Miner. Manag. Serv., 141 Pal, 2016, Journal of Petroleum Science and Engineering Surface tension , dynamic light scattering and rheological studies of a new polymeric surfactant for application in enhanced oil recovery, J. Petrol. Sci. Eng., 146, 591, 10.1016/j.petrol.2016.07.023 Paswan, 2016, Development of Jatropha oil-in-water emulsion drilling mud system, J. Petrol. Sci. Eng., 144, 10, 10.1016/j.petrol.2016.03.002 Paul, 2018, Novel synthetic-based drilling fluid through enzymatic interesterification of canola oil, Int. J. Chem. Eng., 2108 Peng, 2016, World ’ s largest science , Technology & medicine open access book publisher c. Agric, Biol. Sci. Grain Legum Shalaby, 2014 Sherif, 2016, Rheological correlations for oil-based drilling foams, J. Nat. Gas Sci. Eng., 35, 1249, 10.1016/j.jngse.2016.09.064 Siatis, 2006, Improvement of biodiesel production based on the application of ultrasound: monitoring of the procedure by FTIR spectroscopy, J. Am. Oil Chem. Soc., 83, 53, 10.1007/s11746-006-1175-1 Sjöberg, 1999, The effect of polymer and surfactant adsorption on the colloidal stability and rheology of kaolin dispersions, Colloids Surfaces A Physicochem. Eng. Asp., 159, 197, 10.1016/S0927-7757(99)00174-0 Smitter, 2001, Interactions between poly ( ethylene oxide ) and sodium dodecyl sulfate in, Elongational Flows, 353, 343 Sulaimon, 2017, Performance enhancement of selected vegetable oil as base fluid for drilling HPHT formation, J. Petrol. Sci. Eng., 152, 49, 10.1016/j.petrol.2017.02.006 Torres, 2007, Preparation of o/w emulsions stabilized by solid particles and their characterization by oscillatory rheology, Colloids Surfaces A Physicochem. Eng. Asp., 302, 439, 10.1016/j.colsurfa.2007.03.009 Werner, 2017, vol. 156, 845 Xu, 2017, Preparation and performance properties of polymer latex SDNL in water-based drilling fluids for drilling troublesome shale formations, J. Nat. Gas Sci. Eng., 37, 462, 10.1016/j.jngse.2016.11.064 Xu, 2018, A polymer microsphere emulsion as a high-performance shale stabilizer for water-based drilling fluids, RSC Adv., 8, 20852, 10.1039/C8RA03492C Yunita, 2016, Optimization of water-based drilling fluid using non-ionic and anionic surfactant additives, Procedia Eng., 148, 1184, 10.1016/j.proeng.2016.06.628