Development of deformation processed copper-refractory metal composite alloys

Springer Science and Business Media LLC - 1990
J. D. Verhoeven1, W.A. Spitzig1, Laurence Jones1, H. L. Downing2, C.L. Trybus3, Eli Gibson1, L.S. Chumbley1, L. G. Fritzemeier4, G. D. Schnittgrund4
1Ames Laboratory, and Department of Materials Science and Engineering, Iowa State University, Ames, USA
2Department of Physics, Drake University, Des Moines, USA
3Idaho National Engineering Laboratory, EG and G Idaho, Idaho Falls, USA
4Rocketdyne Division, Rockwell International, Canoga Park, USA

Tóm tắt

Từ khóa


Tài liệu tham khảo

J. Bevk, W.A. Sunder, G. Dublon, and D.E. Cohen: inIn Situ Composites IV, Ed. F.D. Lemkey, J.E. Cline, and M. McLean: Material Research Society Symposiums, Elsevier, New York, 1982, vol. 12, p. 121.

J.D. Verhoeven: inIn Situ Composites IV, Ed. F.D. Lemkey, J.E. Cline, and M. McLean: Material Research Society Symposiums, Elsevier, New York, 1982, vol. 12, p. 267.

J. Bevk, J.P. Harbison, and J.L. Bell:J. Appl. Phys., 1979, vol. 49, p. 6031.

C.V. Renaud, E. Gregory, and J. Wang:Adv. Cry. Engr., 1987, vol. 32, p. 443.

C.V. Renaud, E. Gregory, and J. Wang:Adv. Cry. Engr., 1988, vol. 34, p. 435.

W.F. Hosford Jr.: Trans. Met. Soc. AIME, 1964, vol. 230, p. 12.

W.A. Spitzig, A.R. Pelton, and F.C. Laabs:Acta Met., 1987, vol. 35, p. 2427.

J.D. Verhoeven, F.A. Schmidt, E.D. Gibson, and W.A. Spitzig:J Metals., 1986, vol. 38, p. 20.

J.D. Verhoeven and E.D. Gibson, unpublished research, Ames Lab, Ames, Iowa, 50011.

J.D. Verhoeven, E.D. Gibson, F.C. Laabs, J.E. Ostenson, and D.K. Finnemore: IEEE Trans. MAG, 1983,MAG-19(3), p. 563.

J.D. Verhoeven, W.A. Spitzig, F.A. Schmidt, P.D. Krotz, and E.D. Gibson:J. Mat. Sci., 1989, vol. 24, p. 1015.

J.D. Verhoeven, H.L. Downing, L.S. Chumbley, and E.D. Gibson:J. Appl. Phys., 1989, vol. 65, p. 1293.

W.A. Spitzig and P.D. Krotz:Acta Metall., 1988, vol. 36, p. 1709.

W.A. Spitzig and P.D. Krotz:Scripta Met., 1987, vol. 21, p. 1143.

C.L. Trybus and W.A. Spitzig:Acta Metall., 1989, vol. 37, p. 1971.

W.A. Spitzig:Mat. Sci. Engr. in press.

A.R. Pelton, F.C. Laabs, W.A. Spitzig, and C.C. Cheng:Ultramicroscopy, 1987, vol. 22, p. 251.

C.L. Trybus, F.C. Laabs, A.R. Pelton, and W.A. Spitzig: Preparation ofin situ Cu-Nb Composite Sheet and Wire for TEM Analysis,MRS, Transmission Electron Microscopy of Materials, 1988, vol. 115, p. 235, Ed. J.C. Bravman, R. Anderson, and M.L. McDonald, Materials Research Soc., Pittsburgh, Pennsylvania.

C.L. Trybus, L.S. Chumbley, W.A. Spitzig, and J.D. Verhoeven:Ultramicroscopy, 1989, vol. 30, p. 315.

Thông tin
Thông tin xuất bản

Springer Science and Business Media LLC

Thông tin tác giả