Development of constrained layer damping toolholder to improve chatter stability in end milling

Altintas, 2012 Kim, 2001, Forced vibration and dynamic stability of a rotating tapered composite Timoshenko shaft: bending motions in end-milling operations, J Sound Vib, 246, 583, 10.1006/jsvi.2000.3521 Altintas, 2008, Chatter stability of milling in frequency and discrete time domain, CIRP J Manuf Sci Technol, 1, 35, 10.1016/j.cirpj.2008.06.003 Zhao, 2001, Dynamics and stability of milling process, Int J Solids Struct, 38, 2233, 10.1016/S0020-7683(00)00164-5 Hwang, 2003, Design and manufacture of a carbon fiber epoxy rotating boring bar, Compos Struct, 60, 115, 10.1016/S0263-8223(02)00287-8 Rivin, 1992, Enhancement of dynamic stability of cantilever tooling structures, Int J Mach Tools Manuf, 32, 539, 10.1016/0890-6955(92)90044-H Razak, 2016, Progression of tool deterioration and related cutting force during milling of 718Plus superalloy using cemented tungsten carbide tools, Int J Adv Manuf Technol, 10.1007/s00170-016-8438-2 Silent tools application guide, AB Sandvik Coromant; 2012. Ziegert, 2006, Enhanced damping in long slender end mills, Manuf Process, 8, 39, 10.1016/S1526-6125(06)70100-1 Fu, 2015, Suppressing tool chatter with novel multi-layered nanostructures of carbon based composite coatings, J Mater Process Technol, 223, 292, 10.1016/j.jmatprotec.2015.03.043 Song, 2015, Boring bar with constrained layer damper for improving process stability, Int J Adv Manuf Technol, 83, 1 Ghoneim, 2006, Analysis of the flexural vibration of a composite drive shaft with partial cylindrical constrained layer damping treatment, J Vib Control, 12, 25, 10.1177/1077546306060204 Wang, 2004, Finite element dynamic analysis of orthotropic cylindrical shells with a constrained damping layer, Finite Elem Anal Des, 40, 737, 10.1016/S0168-874X(03)00112-4 Houming, 2008, Dynamic characteristics of conjunction of lengthened shrink-fit holder and cutting tool in high-speed milling, J Mater Process Technol, 207, 154, 10.1016/j.jmatprotec.2007.12.083 Yang, 2015, Design and implementation of two-degree-of-freedom tuned mass damper in milling vibration mitigation, J Sound Vib, 335, 78, 10.1016/j.jsv.2014.09.032 Faassen, 2003, Prediction of regenerative chatter by modelling and analysis of high-speed milling, Int J Mach Tools Manuf, 43, 1437, 10.1016/S0890-6955(03)00171-8 Gradišek, 2005, On stability prediction for milling, Int J Mach Tools Manuf, 45, 769, 10.1016/j.ijmachtools.2004.11.015 Song, 2014, Subdivision of chatter-free regions and optimal cutting parameters based on vibration frequencies for peripheral milling process, Int J Mech Sci, 83, 172, 10.1016/j.ijmecsci.2014.04.002 Park, 2007, Robust regenerative chatter stability in machine tools, Int J Adv Manuf Technol, 33, 389, 10.1007/s00170-006-0778-x Movahhedy, 2006, Prediction of chatter in high speed milling including gyroscopic effects, Int J Mach Tools Manuf, 46, 996, 10.1016/j.ijmachtools.2005.07.043 Solis, 2004, A new analytical-experimental method for the identification of stability lobes in high-speed milling, Int J Mach Tools Manuf, 44, 1591, 10.1016/j.ijmachtools.2004.06.011 Rafal, 2015, Chatter identification methods on the basis of time series measured during titanium superalloy milling, Int J Mech Sci, 99, 196, 10.1016/j.ijmecsci.2015.05.013 Miguelez, 2010, Improvement of chatter stability in boring operations with passive vibration absorbers, Int J Mech Sci, 52, 1376, 10.1016/j.ijmecsci.2010.07.003 Teng, 2001, Analysis of damping characteristics for viscoelastic laminated beams, Comput Method Appl Mech Eng, 190, 3881, 10.1016/S0045-7825(00)00305-4 Yim, 2003, A study on material damping of 0 laminated composite sandwich cantilever beams with a viscoelastic layer, Compos Struct, 60, 367, 10.1016/S0263-8223(03)00051-5 Ramesh, 1995, Vibration and damping analysis of cylindrical shells with constrained damping treatment-a comparison of three theories, J Vib Acoust, 117, 213, 10.1115/1.2873911 Zhang, 2006, A study on the damping characteristics of laminated composites with integral viscoelastic layers, Compos Struct, 74, 63, 10.1016/j.compstruct.2005.03.008 Johnson, 1982, Finite element prediction of damping in structures with constrained viscoelastic layers, AIAA J, 20, 1284, 10.2514/3.51190 Lepoittevin, 2010, Optimization of segmented constrained layer damping with mathematical programming using strain energy analysis and modal data, Mater Des, 31, 14, 10.1016/j.matdes.2009.07.026 Cupiał, 1995, Vibration and damping analysis of a three-layered composite plate with a viscoelastic mid-layer, J Sound Vib, 183, 99, 10.1006/jsvi.1995.0241 Yang, 2016, An improved method for tool point dynamics analysis using a bi-distributed joint interface model, Int J Mech Sci, 105, 239, 10.1016/j.ijmecsci.2015.11.014 Bauchau, 2009 Han, 1999, Dynamics of transversely vibrating beams using four engineering theories, J Sound Vib, 225, 935, 10.1006/jsvi.1999.2257 Ball, 1966, Development of a Viscoelastic Composition having Superior Vibration-Damping Capability, J Acoust Soc Am, 39, 663, 10.1121/1.1909939 Bishop, 1963, An investigation into the theory of resonance testing, Philos Trans R Soc A, 255, 241, 10.1098/rsta.1963.0004 Yin, 2008, A new theoretical basis for the bandwidth method and optimal power ratios for the damping estimation, Mech Syst Signal Process, 22, 1869, 10.1016/j.ymssp.2008.01.011 Torki, 2014, Dynamic stability of functionally graded cantilever cylindrical shells under distributed axial follower forces, J Sound Vib, 333, 801, 10.1016/j.jsv.2013.09.005