Development of a quasi-3d numerical model for sediment transport prediction in the coastal region

Anastasiou, 2000, Physical and numerical study of 2-D wave breaking and non-linear effects, 382 Briand, 1993, Waves and currents on natural beaches: a quasi 3d numerical model, Coastal Engineering, 20, 101, 10.1016/0378-3839(93)90057-F Chen, 2007, Boundary layer structure of oscillatory open-channel shallow flows over smooth and rough beds, Experiments in Fluids, 42, 719, 10.1007/s00348-007-0280-8 Davies, 1988, A numerical model of the combined wave and current bottom boundary layer, Journal of Geophysical Research, 93, 491, 10.1029/JC093iC01p00491 Davies, 2002, 1DV modelling of sand transport by waves and currents in the rippled bed regime, 2600 Deigaard, 1986, Suspended sediment in the surf zone, Journal of Waterway, Port, Coastal and Ocean Engineering, ASCE, 112, 115, 10.1061/(ASCE)0733-950X(1986)112:1(115) Dong, 1999, Two-phase flow modelling of sediment motions in oscillatory sheet flow, Coastal Engineering, 36, 87, 10.1016/S0378-3839(98)00052-0 Drønen, 2007, Quasi-three-dimensional modelling of the morphology of longshore bars, Coastal Engineering, 54, 197, 10.1016/j.coastaleng.2006.08.011 Elfrink, 1996, Modelling of q3d sediment transport in the surf zone, 3805 Fernando, 2005, Modelling wave of hydrodynamics around a scheme of detached leaky breakwaters, 830 Fredsøe, 1999, Wave plus current over a ripple-covered bed, Coastal Engineering, 38, 177, 10.1016/S0378-3839(99)00047-2 Fredsøe, 1992 Hamm, L., Mory, M., Peronnard, C., 1995. Hydrodynamic measurements around a detached breakwater in a 3d wave basin Sogreah, Ingenierie, Report No.52184 R10. Harris, J.M., 1997. Modelling random wave boundary layer. Department of Civil Engineering, The University of Liverpool, Ph.D. Jonsson, 1976, Experimental and theoretical investigations in an oscillatory turbulent boundary layer, Journal of Hydraulic Research, 14, 45, 10.1080/00221687609499687 van der Kaaij, 1987 Lesser, 2004, Development and validation of a three-dimensional morphological model, Coastal Engineering, 51, 883, 10.1016/j.coastaleng.2004.07.014 Li, 2006, Modelling coastal boundary layer flows over typical bed-forms, Maritime Engineering, Proceedings of the Institution of Civil Engineers (MA1), 9, 10.1680/maen.2006.159.1.9 Meyer-Peter, E., Müller, R., 1948. Formulas for bed-load transport. In: Rep.2nd Meet. Int. Assoc. Hydrau. Struct. Res., Stockholm, pp. 39–64. O'Connor, 2000, Hydrodynamic modelling of a dynamic inlet, 3472 Okayasu, 1988, Vertical variation of undertow in the surf zone, 478 Rakha, 1998, A quasi-3d phase resolving hydrodynamic and sediment transport model, Coastal Engineering, 34, 277, 10.1016/S0378-3839(98)00030-1 Roelvink, J.A., Reniers, A.J.H.M., 1995. Lip 11d delta flume experiments Delta Hydraulics, Report No.H2130. van Rijn, 1993 van Rijn, 2000 Simons, 1988, Predicting the nearbed turbulent flow in waves and currents, 33 Soulsby, R., 1997. Dynamics of marine sands: a manual for practical applications. HR Wallingford, Report No. SR 466. de Vriend, 1993, Medium-term 2dh coastal area modelling, Coastal Engineering, 21, 193, 10.1016/0378-3839(93)90050-I Wai, 2004, A 3-D wave-current driven coastal sediment transport model, Coastal Engineering Journal, 46, 385, 10.1142/S0578563404001105 Watanabe, 1986, Numerical modelling of nearshore wave field under combined refraction, diffraction and breaking, Coastal Engineering in Japan, 29, 19, 10.1080/05785634.1986.11924425 Yoo, 1989, Numerical modelling of reflective waves on slowly varying currents, 297 Zyserman, 2002, Modelling morphological processes in the vicinity of shore-parallel breakwaters, Coastal Engineering, 45, 261, 10.1016/S0378-3839(02)00037-6