Development of a novel constitutive model for improved structural integrity analysis of piping components

Hassan, 2015, Low-cycle fatigue and ratcheting responses of elbow piping components, J. Press. Vessel Technol., 137 Chen, 2006, Ratcheting study of pressurized elbows subjected to reversed in-plane bending, J. Press. Vessel Technol., 128, 525, 10.1115/1.2349562 Chen, 2013, Recent progress in experimental investigation and finite element analysis of ratcheting in pressurized piping, Int. J. Press. Vessel. Pip., 101, 113, 10.1016/j.ijpvp.2012.10.008 Hassan, 2015, Constitutive models in simulating low-cycle fatigue and ratcheting responses of elbow, J. Press. Vessel Technol., 137 Varelis, 2015, Low-cycle fatigue of pressurized steel elbows under in-plane bending, J. Press. Vessel Technol., 137, 10.1115/1.4027316 EPRI, 1994 Majumder, 1996, Shakedown and ratcheting analyses of fusion reactor first wall, Fusion Technol., 29, 353, 10.13182/FST96-A30721 DeGrassi, 2003, BNL Nonlinear Pre-Test Seismic Analysis for the NUPEC Ultimate Strength Piping Test Program, Transaction of SMiRT 17 Conference Indermohan, 2011, Ratcheting responses of strain hardening plasticity models, 607 Prager, 1956, A new method of analyzing stresses and strains in work hardening plastic solids, J. Appl. Mech., 23, 493, 10.1115/1.4011389 Besseling, 1958, A theory of elastic, plastic and creep deformations of an initially isotropic material, J. Appl. Mech., 25, 529, 10.1115/1.4011867 Chaboche, 1986, Time-independent constitutive theories for cyclic plasticity, Int. J. Plast., 2, 149, 10.1016/0749-6419(86)90010-0 Bari, 2002, An advancement in cyclic plasticity modeling for multiaxial ratcheting simulation, Int. J. Plast., 18, 873, 10.1016/S0749-6419(01)00012-2 Ohno, 1993, Kinematic hardening rules with critical state of dynamic recovery. Parts I and II, Int. J. Plast., 9, 375, 10.1016/0749-6419(93)90042-O Chen, 2004, Modified kinematic hardening rule for multiaxial ratcheting prediction, Int. J. Plast., 20, 871, 10.1016/j.ijplas.2003.05.005 Abdel-Karim, 2000, Kinematic hardening model suitable for ratchetting with steady-state, Int. J. Plast., 16, 225, 10.1016/S0749-6419(99)00052-2 Tanaka, 1988, Constitutive modelling of viscoplasticity incorporating non-proportional hardening effects, Trans. Jpn. Soc. Mech. Eng. Ser. A, 54, 1588, 10.1299/kikaia.54.1588 Feigenbaum, 2012, Multiaxial ratcheting with advanced kinematic and directional hardening rules, Int. J. Solids Struct., 40, 3063, 10.1016/j.ijsolstr.2012.06.006 Balan, 2005, The effect of bi-directional loading on fatigue assessment of pressurized piping elbows with local thinned areas, Int. J. Press. Vessel. Pip., 82, 235, 10.1016/j.ijpvp.2004.07.020 Sakai, 1995, Ultimate strength of thin-walled short elbows during earthquakes, 489 Islam, 2015, Long and short-radius elbow experiments and evaluation of advanced constitutive models to simulate the responses Chaboche, 1991, On some modifications of kinematic hardening to improve the description of ratchetting effects, Int. J. Plast., 7, 661, 10.1016/0749-6419(91)90050-9 Bari, 2000, Anatomy of coupled constitutive models for ratcheting simulation, Int. J. Plast., 16, 381, 10.1016/S0749-6419(99)00059-5 Kang, 2002, Experimental study on uniaxial and non-proportionally multiaxial ratcheting of SS304 stainless steel at room and high temperatures, Nucl. Eng. Des., 216, 13, 10.1016/S0029-5493(02)00062-6 Kang, 2004, Uniaxial and non-proportionally multiaxial ratcheting of SS304 stainless steel at room temperature: experiments and simulations, Int. J. Non-Linear Mech., 39, 843, 10.1016/S0020-7462(03)00060-X Kang, 2006, Time-dependent ratchetting experiments of SS304 stainless steel, Int. J. Plast., 22, 858, 10.1016/j.ijplas.2005.05.006 Fenton, 2014 Islam, 2017 Chaboche, 1979, Modelization of the strain memory effect on the cyclic hardening of 316 stainless steel Rahman, 2008, Evaluation of cyclic plasticity models in ratcheting simulation of straight pipes under cyclic bending and steady internal pressure, Int. J. Plast., 24, 1756, 10.1016/j.ijplas.2008.02.010 Krishna, 2009, Macro versus micro-scale constitutive models in simulating proportional and nonproportional cyclic and ratcheting responses of stainless steel 304, Int. J. Plast., 25, 1910, 10.1016/j.ijplas.2008.12.009 Lamba, 1978, Cyclic plasticity for nonproportional paths. Parts 1 and 2: comparison with predictions of three incremental plasticity models, J. Eng. Mater. Technol., 100, 96, 10.1115/1.3443456 Hassan, 2008, Influences of non-proportional loading paths on ratcheting responses and simulations by two recent cyclic plasticity models, Int. J. Plast., 24, 1863, 10.1016/j.ijplas.2008.04.008 Barrett, 2014 American Society of Mechanical Engineers, 2010