Development of a PrBaMn2O5+δ-La0.8Sr0.2Ga0.85Mg0.15O3-δ composite electrode by scaffold infiltration for reversible solid oxide fuel cell applications

Wilson, 2017 2013 Kim-Lohsoontorn, 2010, Performance of solid oxide electrolysis cells based on composite La0.8Sr0.2MnO3−δ – yttria stabilized zirconia and Ba0.5Sr0.5Co0.8Fe0.2O3−δ oxygen electrodes, Int J Hydrogen Energy, 35, 3958, 10.1016/j.ijhydene.2010.02.039 Zhang, 2019, Development and modelling of a novel electricity-hydrogen energy system based on reversible solid oxide cells and power to gas technology, Int J Hydrogen Energy, 44, 28305, 10.1016/j.ijhydene.2019.09.028 Kang, 2015, Influence of a platinum functional layer on a Ni-Ce0.9Gd0.1O1.95 anode for thin-film solid oxide fuel cells, J Vac Sci Technol A, 33, 10.1116/1.4927160 Bae, 2016, Liquid fuel processing for hydrogen production: a review, Int J Hydrogen Energy, 41, 19990, 10.1016/j.ijhydene.2016.08.135 Minh, 2013, Reversible solid oxide fuel cell technology for green fuel and power production, Electrochem Soc Interface, 22, 55, 10.1149/2.F05134if Kwon, 2019, Long-term durability of La0.75Sr0.25Cr0.5Mn0.5Oδ-3 as a fuel electrode of solid oxide electrolysis cells for co-electrolysis, J CO2 Util, 31, 192, 10.1016/j.jcou.2019.03.004 Kang, 2019, Influence of the start-up rate on the electrochemical impedance of a low-temperature solid oxide fuel cell fabricated by reactive sputtering, Thin Solid Films, 689, 137445, 10.1016/j.tsf.2019.137445 Lee, 2018, Investigation of electrospun Ba0.5Sr0.5Co0.8Fe0.2Oδ-3-Gd0.1Ce0.9O1.95 cathodes for enhanced interfacial adhesion, Int J Hydrogen Energy, 43, 21535, 10.1016/j.ijhydene.2018.09.130 Faes, 2012, A review of RedOx cycling of solid oxide fuel cells anode, Membranes, 2, 585, 10.3390/membranes2030585 Khan, 2016, Fundamental mechanisms involved in the degradation of nickel–yttria stabilized zirconia (Ni–YSZ) anode during solid oxide fuel cells operation: a review, Ceram Int, 42, 35, 10.1016/j.ceramint.2015.09.006 Nechache, 2014, Solid oxide electrolysis cell analysis by means of electrochemical impedance spectroscopy: a review, J Power Sources, 258, 164, 10.1016/j.jpowsour.2014.01.110 Klemensø, 2005, The mechanism behind redox instability of anodes in high-temperature SOFCs, J Electrochem Soc, 152, A2186, 10.1149/1.2048228 Jiang, 2004, A review of anode materials development in solid oxide fuel cells, J Mater Sci, 39, 4405, 10.1023/B:JMSC.0000034135.52164.6b Laguna-Bercero, 2012, Recent advances in high temperature electrolysis using solid oxide fuel cells: a review, J Power Sources, 203, 4, 10.1016/j.jpowsour.2011.12.019 Sun, 2010, Cathode materials for solid oxide fuel cells: a review, J Solid State Electrochem, 14, 1125, 10.1007/s10008-009-0932-0 Pihlatie, 2011, Electrical conductivity of Ni–YSZ composites: degradation due to Ni particle growth, Solid State Ion, 189, 82, 10.1016/j.ssi.2011.02.001 Liu, 2016, Highly stable and efficient catalyst with in situ exsolved Fe-Ni alloy nanospheres socketed on an oxygen deficient perovskite for direct CO2 electrolysis, ACS Catal, 6, 6219, 10.1021/acscatal.6b01555 Wang, 2016, Exsolved Fe-Ni nano-particles from Sr2Fe1.3Ni0.2Mo0.5O6 pervoskite oxides as cathodes for solid oxide steam electrolysis cells, J Mater Chem A, 4, 14163, 10.1039/C6TA06078A Jun, 2016, Achieving high efficiency and eliminating degradation in solid oxide electrochemical cells using high oxygen-capacity perovskite, J German Chem Soc, 55, 12111 Dong, 2016, All in one multifunctional perovskite material for next generation SOFC, Electrochim Acta, 193, 225, 10.1016/j.electacta.2016.02.061 Sengodan, 2014, Layered oxygen-deficient double perovskite as an efficient and stable anode for direct hydrocarbon solid oxide fuel cells, Nat Mater, 14, 205, 10.1038/nmat4166 Hosoi, 2016, Ce0.6Mn0.3Fe0.1O2-d as an alternative cathode material for high temperature steam electrolysis using LaGaO3-based oxide electrolyte, Electrochim Acta, 194, 473, 10.1016/j.electacta.2016.02.121 Kang, 2018, Application of electroless plating process for multiscale Ni-La0.8Sr0.2Ga0.8Mg0.2O3-σ SOFC anode fabrication, Int J Hydrogen Energy, 43, 6400, 10.1016/j.ijhydene.2018.01.147 Biswal, 2015, Novel way of phase stability of LSGM and its conductivity enhancement, Int J Hydrogen Energy, 40, 509, 10.1016/j.ijhydene.2014.10.099 Karczewski, 2012, Solid oxide fuel cells with Ni-infiltrated perovskite anode, Solid State Ion, 221, 11, 10.1016/j.ssi.2012.06.002 Ruiz-Trejo, 2015, Metallizing porous scaffolds as an alternative fabrication method for solid oxide fuel cell anodes, J Power Sources, 280, 81, 10.1016/j.jpowsour.2015.01.091 Chick, 1990, Glycine-nitrate combustion synthesis of oxide ceramic powders, Mater Lett, 10, 6, 10.1016/0167-577X(90)90003-5 Huízar-Félix, 2012, Sol–gel based Pechini method synthesis and characterization of Sm1−xCaxFeO3 perovskite 0.1≤x≤0.5, Powder Technol, 229, 290, 10.1016/j.powtec.2012.06.057 Jiang, 2008, Electrical conductivity and performance of doped LaCrO3 perovskite oxides for solid oxide fuel cells, J Power Sources, 176, 82, 10.1016/j.jpowsour.2007.10.053 Lee, 2017, Fabrication of solid oxide fuel cells (SOFCs) by solvent-controlled co-tape casting technique, Int J Hydrogen Energy, 42, 1648, 10.1016/j.ijhydene.2016.07.066 Yoon, 2013, Effects of infiltrated Sr and Mn doped LaCrO3 on porous La0.8Sr0.2Ga0.8Mg0.2O3-δ scaffolds used as anodes in solid oxide fuel cells, Solid State Ion, 249–250, 26, 10.1016/j.ssi.2013.07.007 Yang, 2015, Co-electrolysis of H2O and CO2 in a solid oxide electrolysis cell with hierarchically structured porous electrodes, J Mater Chem A, 3, 15913, 10.1039/C5TA03264D Chen, 2013, Theory for the electrical conductivity of nanoparticle-infiltrated composite electrode of solid oxide fuel cell, ECS Electrochem Lett, 2, F82, 10.1149/2.008311eel Yoon, 2013, Characteristics of nano La0.6Sr0.4Co0.2Fe0.8O3−δ-infiltrated La0.8Sr0.2Ga0.8Mg0.2O3−δ scaffold cathode for enhanced oxygen reduction, Int J Hydrogen Energy, 38, 13399, 10.1016/j.ijhydene.2013.07.087 Cowin, 2016, Conductivity and redox stability of new double perovskite oxide Sr1.6K0.4Fe1+x Mo1−x O6−δ (x = 0.2, 0.4, 0.6), J Mater Sci, 51, 4115, 10.1007/s10853-016-9734-9 Ding, 2015, A high-performing sulfur-tolerant and redox-stable layered perovskite anode for direct hydrocarbon solid oxide fuel cells, Sci Rep, 5, 1, 10.1038/srep18129 Howell, 2014, Sr2−XLaXMgMoO6 and Sr2−XLaXMgNbO6 for use as sulfur-tolerant anodes without a buffer layer, J Am Ceram Soc, 97, 3636, 10.1111/jace.13208 Choi, 2013, Highly efficient and robust cathode materials for low-temperature solid oxide fuel cells: PrBa0.5Sr0.5Co2-xFexO5+d, Sci Rep, 3, 2426, 10.1038/srep02426 Yoon, 2014 Yoon, 2013, Electrochemical investigation of composite nano La0.6Sr0.4Co0.2Fe0.8O3-δ infiltration into LSGM scaffold cathode on LSGM electrolyte, ECS Trans, 57, 1933, 10.1149/05701.1933ecst O'Hayre, 2016 Gross, 2007, An examination of SOFC anode functional layers based on ceria in YSZ, J Electrochem Soc, 154, B694, 10.1149/1.2736647 Kim, 2008, SOFC anodes based on LST-YSZ composites and on Y0.04Ce0.48Zr0.48O2, J Electrochem Soc, 155, B360, 10.1149/1.2840473 Sengodan, 2017, Self-decorated MnO nanoparticles on double perovskite solid oxide fuel cell anode by in situ exsolution, ACS Sustainable Chem Eng, 5, 9207, 10.1021/acssuschemeng.7b02156 Krumgalz, 2017, Temperature dependence of mineral solubility in water. Part I. Alkaline and alkaline earth chlorides, J Phys Chem Ref Data, 46, 10.1063/1.5006028 Krumgalz, 2018, Temperature dependence of mineral solubility in water. Part 2. Alkaline and alkaline earth bromides, J Phys Chem Ref Data, 47, 10.1063/1.5010290 Krumgalz, 2018, Temperature dependence of mineral solubility in water. Temperature dependence of mineral solubility in water. Part 3. Alkaline and alkaline earth sulfates, J Phys Chem Ref Data, 47, 10.1063/1.5031951 Sohnel, 1984, Densities of aqueous solutions of 18 inorganic substances, J Chem Eng Data, 29, 379, 10.1021/je00038a004 Kim-Lohsoontorn, 2011, Electrochemical performance of solid oxide electrolysis cell electrodes under high-temperature coelectrolysis of steam and carbon dioxide, J Power Sources, 196, 7161, 10.1016/j.jpowsour.2010.09.018