Development of CO2 capture capacity by using impregnation method in base condition for K2CO3/Al2O3

Energy Reports - Tập 6 - Trang 25-31 - 2020
Jaruwan Charoenchaipet1, Pornpote Piumsomboon1,2, Benjapon Chalermsinsuwan1,2
1Department of Chemical Technology, Faculty of Science, Chulalongkorn University, 254 Phayathai Road, Wangmai, Pathumwan, Bangkok 10330, Thailand
2Center of Excellence on Petrochemical and Materials Technology, Chulalongkorn University, 254 Phayathai Road, Wangmai, Pathumwan, Bangkok 10330, Thailand

Tài liệu tham khảo

Ben-Mansour, 2016, Carbon capture by physical adsorption : Materials, experimental investigations and numerical modeling and simulations - A review, Appl Energy, 161, 225, 10.1016/j.apenergy.2015.10.011 Guo, 2015, K2CO3-modified potassium feldspar for CO2 capture from post-combustion fule gas, Energy Fuel, 29, 8151, 10.1021/acs.energyfuels.5b02207 Wang, 2014, Recent advances in solid sorbents for CO2 capture and new development trends, Energy Environ Sci, 7, 3478, 10.1039/C4EE01647E Iruretagoyena, 2015, Influence of alkali metals (Na, K, and Cs) on CO2 adsorption by layered double oxides supported on graphene oxide, Ind Eng Chem Res, 54, 11610, 10.1021/acs.iecr.5b02762 Lee, 2016, Effect of pH-controlled synthesis on the physical properties and intermediate-temperature CO2 sorption behaviors of K–Mg double salt-based sorbents, Chem Eng J, 294, 439, 10.1016/j.cej.2016.03.003 Boonprasop, 2017, Effect of the operating parameters on the CO2 capture capacity of potassium carbonate supported on gamma alumina(K2CO3 / γ-Al2O3) using conventional heat regeneration), J Taiwan Inst Chem Eng, 78, 282, 10.1016/j.jtice.2017.06.016 Jo, 2016, Regenerable potassium-base alumina sorbents preparaed by CO2 thermal treatment for post- combustion carbon dioxide capture, Korean J Chem Eng, 11, 3207, 10.1007/s11814-016-0162-y Jiao, 2015, Influence of preparation parameters on the structural properties and the CO2 capture performance of Mg–Zr solid sorbent, Mater Res Bull, 64, 163, 10.1016/j.materresbull.2014.12.029 Zhang, 2016, Synthesis and characterization of mesoporous alumina with high specific area via coprecipitation method, Vacuum, 133, 1, 10.1016/j.vacuum.2016.08.005 Hao, 2013, Mesoporous Ti–W oxide: synthesis, characterization, and performance in selective hydrogenolysis of glycerol, J Mater Chem, 39, 515 Lee, 2010, Structure effects of potassium-based TiO2 sorbents on the CO2 capture capacity, Top Catalysis, 53, 641, 10.1007/s11244-010-9499-3 Lee, 2006, CO2 absorption and regeneration of alkali-metal base solid sorbent, Catal Today, 111, 385, 10.1016/j.cattod.2005.10.051 Lee, 2008, Development of regenerable MgO-based sorbent promoted with K2CO3 for CO2 capture at low temperatures, Environ Sci Technol, 42, 2736, 10.1021/es702693c Zhao, 2014, Removal of low concentration CO2 at ambient temperature using several potassium-based sorbents, Appl Energy, 124, 241, 10.1016/j.apenergy.2014.02.054