Development and Performance Evaluation of a Robot for Lawn Mowing

Free Software Foundation, (FSF) Inc. GNU general public license. http://www.gnu.org/copyleft/gpl.html, June 1991. Brooks, R. A. Intelligence without reason. In Proceedings of the 1991 International Joint Conference on Artificial Intelligence, 1991, 595-569. Dana, P. H. Global positioning system overview.http://www.colorado.Edu/geography/gcraft/notes/gps/gps.html. Accessed on 2-2-2017. Arkin, 2000, Approximation algorithms for lawn mowing and milling, Computational Geometry, 17, 25, 10.1016/S0925-7721(00)00015-8 Schierer, E.. “Humanoid Robots for Human Life Support”, Proceedings of IFAC Conference on Supplemental ways for improving International stability through automation 15-17 June 2006, Ed. P. Kopacek, 101-105, Elsevier. Bravo, R. “Tired From Mowing the Lawn”, Journal of Pediatric Health Care, 2010, 24:123–126. Reid, 2000, "Agricultural automatic guidance research in North America", Computers and Electronics in Agriculture, 25, 155, 10.1016/S0168-1699(99)00061-7 Kim, 2003, "Optimal sweeping paths on a 2-manifold: A new class of optimization problems defined by path structures", IEEE Transactions on Robotics and Automation, 19, 613, 10.1109/TRA.2003.814497 Sipahioglu, 2010, Energy constrained multi-robot sensor-based coverage path planning using capacitated arc routing approach, Robotics and Autonomous Systems, 58, 529, 10.1016/j.robot.2010.01.005 Okarfor, 2013, Simple design of self-powered lawn mower., Int’l. J. of Eng. & Tech., 3, 933 Dipin, A. and Chandrashekhar, T. K. Solar powered vision based robotic lawn mower,” International Journal of Engineering Research and Reviews. 2014, 2, pp: 53-56, April - June 2014. Dutta, 2016, A technical review of lawn mower technology., AUBU-Journal of Engineering Technology, 1, 1 Killough, M. K. and Crumption L. L. An investigation of cumulative trauma disorders in the construction industry. Int J. Ind. Ergon.; 1996, 18:399–405. Muggleton, 1999, Hand and Arm injuries associated with repetitive manual work in industry: a review of disorders, risk factors and preventive measures, Ergonomics, 42, 714, 10.1080/001401399185405 Batavia, P., Roth, S. A. and Singh, S. Autonomous coverage operations in semi-structured outdoor environments. In 2002 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS ‘02), October 2002. Keicher, 2000, Automatic guidance for agricultural vehicles in Europe, Computers and Electronics in Agriculture., 25, 169, 10.1016/S0168-1699(99)00062-9 Derander, J. M., Andersson, P., Wennerberg, E., Nitsche, A., Moen, E. and Labe, F. Smart robot lawn mower. Bachelor Thesis, Department of Computer Science and Engineering, Chalmers University of Technology, University of Gothenburg, Gothenburg, Sweden. 2018, pp. 1-70. Ahamed, M. S. and Ziauddin, A. T. M. Development of a small scale electric lawn mower. Bangladesh J. Agri. Engg. 2011, 22 (1&2) 37-44. Tanimola, 2014, Design and development of a solar powered lawn mower, International Journal of Scientific & Engineering Research, 5, 215 Namoco, 2013, Development of a mechanical push lawn mower with double-cylinder spinning blades, Int’l. J. of Eng. Res. & Tech., 2, 1861 Moore, M. D. Measurement and analysis of lawn mower performance and noise. Masters Thesis, Iowa State University, USA. 1997, pp. 1-98. Khan, 2013, Commercial Grass Cutting cum Collecting Machine, IOSR Journal of Mechanical and Civil Engineering, 10, 35, 10.9790/1684-1013538 LaMott, K. and Tosunoglu, S. Development of a robotic lawnmower as an adaptable platform for swappable remote and autonomous control packages. Florida Conference on Recent Advances in Robotics, FCRAR 2010 -Jacksonville, Florida, May 20-21, 2010. Bhutada, 2017, Design modification and performance comparison of lawn mower machine by mulch and flat type cutting blade., International Journal of Agricultural Sciences, 9, 4638 Stachniss C. and Burgard, W. An integrated approach to goal-directed obstacle avoidance under dynamic constraints for dynamic environments. IROS, 2002. System at the driving point, SDP (Standard No. ISO 10068:1988). Geneva, Switzerland: ISO; 1988.