Developing dual-textured titanium (Ti) extrudates via utilizing the β transus in commercially pure Ti

Qian, 2015, Pressureless sintering of titanium and titanium alloys: sintering densification and solute homogenization, 201 Yang, 2015, “Spark plasma sintering and hot pressing of titanium and titanium alloys,” in Titanium Powder Metallurgy Netherlands, Elsevier, 219 Zhao, 2021, Interfacial structures and strengthening mechanisms of in situ synthesized TiC reinforced Ti6Al4V composites by selective laser melting, Ceram. Int., 47, 34127, 10.1016/j.ceramint.2021.08.323 Li, 2009, Hot working of Ti–6Al–3Mo–2Zr–0.3Si alloy with lamellar α+β starting structure using processing map, Mater. Des., 30, 1625, 10.1016/j.matdes.2008.07.031 Song, 2007, The effects of spark anodizing treatment of pure titanium metals and titanium alloys on corrosion characteristics, Surf. Coat. Technol., 201, 8738, 10.1016/j.surfcoat.2006.11.022 Geetha, 2009, Ti based biomaterials, the ultimate choice for orthopaedic implants – A review, Prog. Mater Sci., 54, 397, 10.1016/j.pmatsci.2008.06.004 Cai, 2021, A novel biomedical titanium alloy with high antibacterial property and low elastic modulus, J. Mater. Sci. Technol., 81, 13, 10.1016/j.jmst.2021.01.015 Howe, 2019, Long-term (10-year) dental implant survival: A systematic review and sensitivity meta-analysis, J. Dent., 84, 9, 10.1016/j.jdent.2019.03.008 Mishnaevsky, 2014, Nanostructured titanium-based materials for medical implants: Modeling and development, Mater. Sci. Eng.: R: Reports, 81, 1, 10.1016/j.mser.2014.04.002 Khorasani, 2015, Titanium in Biomedical Applications—Properties and Fabrication: A Review, J. Biomater. Tissue Eng., 5, 593, 10.1166/jbt.2015.1361 Gomes, 2011, Assessment of the genetic risks of a metallic alloy used in medical implants, Genetics Mol. Biol., 34, 116, 10.1590/S1415-47572010005000118 Ze-Yun, 2020, Optimizing Strength and Ductility of Titanium Alloys by Oxygen, Review and Prospect, 39, 615 Özcan, 2012, Titanium as a Reconstruction and Implant Material in Dentistry, Advantages and Pitfalls, 5, 1528 Sun, 2013, Fabrication of high-strength Ti materials by in-process solid solution strengthening of oxygen via P/M methods, Mater. Sci. Eng., A, 563, 95, 10.1016/j.msea.2012.11.058 Kondoh, 1986, Experimental And Theoretical Analysis Of Nitrogen Solid-Solution Strengthening Of PM Titanium, Int. J. Powder Metallurgy, 50, 35 Mimoto, 2015, Titanium Powders via Gas-Solid Direct Reaction Process and Mechanical Properties of Their Extruded Materials, Mater. Trans., 56, 1153, 10.2320/matertrans.L-M2015816 Issariyapat, 2020, Tensile properties improvement by homogenized nitrogen solid solution strengthening of commercially pure titanium through powder metallurgy process, Mater. Charact., 170, 10.1016/j.matchar.2020.110700 Chen, 2017, Advanced mechanical properties of powder metallurgy commercially pure titanium with a high oxygen concentration, J. Mater. Res., 32, 3769, 10.1557/jmr.2017.338 Babel, 1968, A Review of Texture Strengthening of Titanium Alloys, JOM, 20, 32, 10.1007/BF03378751 Bahador, 2021, Ultrafine-grain formation and improved mechanical properties of novel extruded Ti-Fe-W alloys with complete solid solution of tungsten, J. Alloy. Compd., 875, 10.1016/j.jallcom.2021.160031 Pripanapong, 2016, Effect of Textures on Tensile Properties of Extruded Ti64/VGCF Composite by Powder Metallurgy Route, Mech.Mater. Sci. Eng. M. Peters, J. Hemptenmacher, J. Kumpfert, and C. Leyens, “Structure and Properties of Titanium and Titanium Alloys,” in Titanium and Titanium Alloys, C. Leyens and M. Peters, Eds., 2003, pp. 8-9. Shen, 2017, The formation of bimodal multilayered grain structure and its effect on the mechanical properties of powder metallurgy pure titanium, Mater. Des., 116, 99, 10.1016/j.matdes.2016.12.004 Li, 2013, Powder metallurgy titanium metal matrix composites reinforced with carbon nanotubes and graphite, Compos. A Appl. Sci. Manuf., 48, 57, 10.1016/j.compositesa.2012.12.005 Li, 2013, Powder metallurgy Ti–TiC metal matrix composites prepared by in situ reactive processing of Ti-VGCFs system, Carbon, 61, 216, 10.1016/j.carbon.2013.04.088 Jia, 2014, Stability of strengthening effect of in situ formed TiCp and TiBw on the elevated temperature strength of (TiCp+TiBw)/Ti composites, J. Alloy. Compd., 614, 29, 10.1016/j.jallcom.2014.06.094 Bache, 2001, Impact of texture on mechanical properties in an advanced titanium alloy, Mater. Sci. Eng., A, 319-321, 409, 10.1016/S0921-5093(00)02034-7 J. P. Pollard, W. L. Porter, and M. S. Redfern, “Forces and Moments on the Knee During Kneeling and Squatting,” University of Pittsburgh, Pittsburgh, PA. Rao, 2017, Analysis of Knee Joint in Various Postures and Finite Element Analysis on Tibia, Int. J. Adv. Res., Ideas and Innovations in Technol., 3, 264 Makinejad, 2013, Preliminary analysis of knee stress in Full Extension Landing, Clinics, 68, 1180, 10.6061/clinics/2013(09)02 Cai, 2021, Mechanical behavior and microstructure control of the low-cost titanium-oxygen alloy prepared by ball milling and spark plasma sintering, J. Alloy. Compd., 10.1016/j.jallcom.2021.161349 Kariya, 2019, Quantitative Analysis on Light Elements Solution Strengthening in Pure Titanium Sintered Materials by Labusch Model Using Experimental Data, Mater. Trans., 60, 263, 10.2320/matertrans.Y-M2018849 Finlay, 1950, Effects of three interstitial solutes (nitrogen, oxygen, and carbon) on the mechanical properties of high-purity, alpha titanium, JOM, 2, 277, 10.1007/BF03399001 Bahador, 2021, Microstructure globularization of high oxygen concentration dual-phase extruded Ti alloys via powder metallurgy route, Mater. Charact., 172, 110855, 10.1016/j.matchar.2020.110855 Yu, 2015, Origin of dramatic oxygen solute strengthening effect in titanium, Science, 347, 635, 10.1126/science.1260485 Conrad, 1981, Effect of interstitial solutes on the strength and ductility of titanium, Prog. Mater Sci., 26, 123, 10.1016/0079-6425(81)90001-3 Yan, 2014, Review of effect of oxygen on room temperature ductility of titanium and titanium alloys, Powder Metall., 57, 251, 10.1179/1743290114Y.0000000108 Wei, 2019, Crystal Plasticity Simulation of Hot Deformation Texture of Titanium Alloy Considering Alpha-beta Transformation, IOP Conference Series: Materials Science and Engineering, 538, 012006, 10.1088/1757-899X/538/1/012006 Wei, 2016, Introducing equiaxed grains and texture into Ni-Mn-Ga alloys by hot extrusion for superplasticity, Mater. Des., 112, 339, 10.1016/j.matdes.2016.09.076 Raabe, 1995, Simulation of rolling textures of b.c.c. metals considering grain interactions and crystallographic slip on 110}, {112 and 123 planes, Mater. Sci. Eng., A, 197, 31, 10.1016/0921-5093(94)09770-4 Tong, 2017, Using transmission Kikuchi diffraction to characterise alpha variants in an alpha+beta titanium alloy, J. Microsc., 267, 318, 10.1111/jmi.12569 Bahador, 2021, Strength–ductility balance of powder metallurgy Ti–2Fe–2W alloy extruded at high-temperature, J. Mater. Res. Technol., 14, 677, 10.1016/j.jmrt.2021.06.086