Determination of optimum numerical parameters in a 3D model of finish turning operation applied to Inconel 718

Roy, 2018, A brief review on machining of Inconel 718, Proceedings, 5, 18664 Datta, 2019, Machinability analysis of Inconel 601, 625, 718 and 825 during electro-discharge machining: on evaluation of optimal parameters setting, Measurement Devillez, 2007, Cutting forces and wear in dry machining of Inconel 718 with coated carbide tools, Wear, 262, 931, 10.1016/j.wear.2006.10.009 Kose, 2008, The effects of the feed rate on the cutting tool stresses in machining of Inconel 718, J. Mater. Process. Technol., 196, 165, 10.1016/j.jmatprotec.2007.05.019 Fang, 2009, A comparative study of the cutting forces in high speed machining of Ti–6Al–4V, J. Mater. Process. Technol., 209, 4385, 10.1016/j.jmatprotec.2008.10.013 Thakur, 2009, Study on the machinability characteristics of superalloy during high speed turning, Mater. Design, 30, 1718, 10.1016/j.matdes.2008.07.011 Olovsjö, 2012, Influence of microstructure on wear behaviour of uncoated WC tools in turning of Alloy 718 and Waspaloy, Wear, 283, 12, 10.1016/j.wear.2012.01.004 Venkatesan, 2019, Surface finish and chip morphology on machining of Inconel 825, Procedia Manufact., 30, 611, 10.1016/j.promfg.2019.02.086 Qadri, 2019, An experimental study on investigation of machining of nickel based super alloy 718 Hua, 2019, Surface modification through combination of finish turning with low plasticity burnishing and its effect on fatigue performance for Inconel 718, Surface Coatings Technol., 375, 508, 10.1016/j.surfcoat.2019.07.057 Bhatt, 2009, Wear mechanisms of Wc coated and uncoated tools in finish turning of Inconel 718, Tribol. Int., 41, 1113 Díaz-Álvarez, 2014, Numerical analysis of thermomechanical phenomena influencing tool wear in finishing turning of inconel 718, Int. J. Mech. Sci., 82, 161, 10.1016/j.ijmecsci.2014.03.010 Muñoz, 2016, Mecanizado de alta velocidad de superaleaciones de base níquel con herramientas pcbn, XXI Congreso nacional de ingeniería mecánica, 761 Parida, 2019, Numerical and experimental analysis of specific cutting energy in hot turning of Inconel 718, Measurement, 133, 361, 10.1016/j.measurement.2018.10.033 Vasant, 2018, Finite element simulation and experimental validation of laser assisted machining of Inconel 718, Mater.s Today: Proc., 5, 13637 Jafarian, 2014, Finite element simulation of machining Inconel 718 alloy including microstructure changes, Int. J. Mech. Sci., 88, 110, 10.1016/j.ijmecsci.2014.08.007 Rana, 2016, 2D FE prediction of surface alteration of Inconel 718 under machining condition, Procedia CIRP, 45, 227, 10.1016/j.procir.2016.02.346 Jeyapandiarajan, 2019, Evaluating the machinability of Inconel 718 under different machining conditions, Procedia Manufact., 30, 253, 10.1016/j.promfg.2019.02.037 Uhlmann, 2007, Finite element modeling and cutting simulation of Inconel 718, CIRP Annals, 56, 61, 10.1016/j.cirp.2007.05.017 Yadav, 2015, A simulation approach for estimating flank wear and material removal rate in turning of Inconel 718, Simul. Model. Pract. Theory, 52, 1, 10.1016/j.simpat.2014.12.004 Vijayaraghavan, 2016, A finite element based data analytics approach for modeling turning process of Inconel 718 alloys, J. Clean Prod., 137, 1619, 10.1016/j.jclepro.2016.04.010 Ducobu, 2017, Finite element modelling of 3D orthogonal cutting experimental tests withthe coupled eulerian-lagrangian (CEL) formulation, Finite Elements Anal. Design, 134, 27, 10.1016/j.finel.2017.05.010 Kumar, 2017, A 3-D simulation and experimental study of cutting forces in turning inconel-718, Mater. Today, 4, 9942, 10.1016/j.matpr.2017.06.298 Reddy, 2017, Temperature study in turning inconel-718: 3D simulation and experimentation, Materials Today, 4, 9946 JianWeng, 2019, A novel approach to thermal modeling based on three-dimensional analysis in turning inconel 718 with round insert, J. Mater. Process. Technol., 266, 588, 10.1016/j.jmatprotec.2018.11.040 Molinari, 2004, A new thermomechanical model of cutting applied to turning operations. part I. theory, Int. J. Mach. Tools Manufact., 45, 166, 10.1016/j.ijmachtools.2004.07.004 Johnson, 1983, A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures, 541 Tounsi, 2007 Dassault Systèmes, “5.2.3 Coulomb friction,” in Abaqus 6.12 User's Manual, 2012. Molinari, 2013, Adiabatic shear banding and scaling laws in chip formation with application to cutting of Ti–6Al–4V, J. Mech. Phys. Solids, 61, 2331, 10.1016/j.jmps.2013.05.006 Bäker, 2002, A finite element model of high speed metal cutting with adiabatic shearing, Comput. Struct., 80, 495, 10.1016/S0045-7949(02)00023-8 Sima, 2010, Modified material constitutive models for serrated chip formation simulations and experimental validation in machining of titanium alloy Ti–6Al–4V, Int. J. Mach. Tools Manufact., 50, 943, 10.1016/j.ijmachtools.2010.08.004 Miguélez, 2013, Analysis of adiabatic shear banding in orthogonal cutting of Ti alloy, Int. J. Mech. Sci., 75, 212, 10.1016/j.ijmecsci.2013.06.011 Ducobu, 2016, Material constitutive model and chip separation criterion influence on the modeling of Ti6Al4V machining with experimental validation in strictly orthogonal cutting condition, Int. J. Mech. Sci., 107, 136, 10.1016/j.ijmecsci.2016.01.008 Chen, 2016, Finite element simulation of high-speed machining of titanium alloy (Ti–6Al–4V) based on ductile failure model, Int. J. Adv. Manufact. Technol., 56, 1027, 10.1007/s00170-011-3233-6 Wierzbicki, 2005, Calibration and evaluation of seven fracture models, Int. J. Mech. Sci., 47, 719, 10.1016/j.ijmecsci.2005.03.003 Soldani, 2017, Numerical modeling of instabilities during machining of aeronautical alloy, Procedia Manufact., 13, 36, 10.1016/j.promfg.2017.09.006 Soldani, 2018, Chip formation modeling using traction-separation cohesive model, Int. J. Adv. Manufact. Technol., 1 Pawade, 2007, An investigation of cutting forces and surface damage in high-speed turning of Inconel 718, J. Mater. Process. Technol., 192–193, 139, 10.1016/j.jmatprotec.2007.04.049 Marchand, 1988, An experimental study of the formation process of adiabatic shear bands in a structural steel, J. Mech. Phys. Soldis, 36, 251, 10.1016/0022-5096(88)90012-9 Dodd, 2012, Adiabatic shear localization Parida, 2018, Compatison the machinibility of inconel 718, inconel 625 and monel 400 in hot turning operation, Eng. Sci. Technol., 21, 364 Ramírez P., 2017, A new approach for time- space wear modeling applied to machining tool wear, Wear, 390–391, 125, 10.1016/j.wear.2017.07.015