Determination of optimum location for flexible outrigger systems in tall buildings with constant cross section consisting of framed tube, shear core, belt truss and outrigger system using energy method
Tóm tắt
In this paper, based on maximizing the outrigger-belt truss system’s strain energy, a methodology for determining the optimum location of a flexible outrigger system is presented. Tall building structures with combined systems of framed tube, shear core, belt truss and outrigger system are modeled using continuum approach. In this approach, the framed tube system is modeled as a cantilevered beam with box cross section. The effect of outrigger and shear core systems on framed tube’s response under lateral loading is modeled by a rotational spring placed at the location of belt truss and outrigger system. Optimum location of this spring is obtained when energy absorbed by the spring is maximized. For this purpose, first derivative of the energy equation with respect to spring location as measured from base of the structure, is set to zero. Optimum location for outrigger and belt truss system is calculated for three types of lateral loadings, i.e. uniformly and triangularly distributed loads along structure’s height, and concentrated load at top of the structure. Accuracy of the proposed method is verified through numerical examples. The results show that the proposed method is reasonably accurate. In addition, for different stiffness of shear core and outrigger system, several figures are presented that can be used to determine the optimum location of belt truss and outrigger system.
Tài liệu tham khảo
Assadi Zeidabadi, N. Mirtalae, K. and Mobasher, B. (2004). “Optimized use of the outrigger system to stiffen the coupled shear walls in tall buildings.” The Structural Design of Tall and Special Buildings, John Wiley & Sons, 13(1), pp. 9–27.
Bayati, Z. Mahdikhani, M. and Rahaei, A. (2008). “Optimized use of multi-outriggers system to stiffen tall buildings.” The 14th World Conference on Earthquake Engineering, Beijing, China.
Eltobgy, H. H. (2013). “Optimum belt truss locations to enhance the structural performance of high-rise steel buildings.” Wulfenia Journal, 20(6), pp. 166–173.
Fawzia, S, Nasir, A. and Fatima, T. (2011). “Study of the effectiveness of outrigger system for high-rise composite buildings for cyclonic region.” International Conference on Electrical, Computer, Electronics and Communication Engineering, pp. 937–945.
Fawzia, S. and Fatima, T. (2010). “Deflection control in composite building by using belt truss and outriggers systems.” Proceedings of the 2010 World Academy of Science, Engineering and Technology conference, pp. 646–651.
Gerasimidis, S. Efthymiou, E. and Baniotopoulos, C. (2009). “Optimum outrigger locations of high-rise steel buildings for wind loading.” EACWE 5, Italy.
Haghollahi, A. Besharat Ferdous, M. and Kasiri, M. (2012). “Optimization of outrigger locations in steel tall buildings subjected to earthquake loads.” 15 WCEE, Lisbon, Portugal.
Heidari, A. Rahgozar, R. and Kamgar, R. (2014). “Free vibration analysis of tall building with geometrical discontinuities.” Asian Journal of Civil Engineering, 15(1), pp. 107–122.
Hoenderkamp, J. C. D. (2004). “Shear wall with outrigger trusses on wall and column foundations.” The Structural Design of Tall and Special Buildings, John Wiley & Sons, 13(1), pp. 73–87.
Hoenderkamp, J. C. D. (2008). “Second outrigger at optimum location on high rise shear wall.” The Structural Design of Tall and Special Buildings, John Wiley & Sons, 17(3), pp. 619–634.
Kamgar, R. and Rahgozar, R. (2013). “A simple approximate method for free vibration analysis of framed tube structures.” The Structural Design of Tall and Special Buildings, John Wiley & Sons, 22(2), pp. 217–234.
Kamgar, R. and Saadatpour, M. M. (2012). “A Simple Mathematical Model for Free vibration analysis of combined system consisting of framed tube, shear core, belt truss and outrigger system with geometrical.” Journal of Applied Mathematical Modelling, ELSEVIER, 36(10), pp. 4918–4930.
Lee, K. K. Loo, Y. C. and Guan, H. (2001). “Simple analysis of framed-tube structures with multiple internal tubes.” Journal of Structural Engineering, ASCE, 127(4), pp. 450–460.
Mcewen, N. F. (2011). “Optimal bracing type and layouts to minimize lateral drift in high-rise steel framed buildings subjected to high winds using SAP2000.” Thesis of Master of Science, University of Alabama, Birmingham.
McNabb, J. W. and Muvdi, B. B. (1975). “Drift reduction factors for belted high-rise structures.” Engineering Journal, AISC, 12(3), pp. 88–91.
Rahgozar, R. Ahmadi, A. R. and Sharifi, Y. (2010). “A simple mathematical model for approximate analysis of tall buildings.” Journal of Applied Mathematical Modelling, ELSEVIER, 34(9), pp. 2437–2451.
Rahgozar, R. and Sharifi, Y. (2009). “An approximate analysis of combined system of framed tube, shear core and belt truss in high-rise buildings.” The Structural Design of Tall and Special Buildings, John Wiley & Sons, 18(6), pp. 607–624.
Raj Kiran Nanduri, P. M. B. Suresh, B. and Ihtesham Hussain, M. D. (2013). “Optimum position of outrigger system for high-rise reinforced concrete buildings under wind and earthquake loadings.” American Journal of Engineering Research, 2(8), pp. 76–89.
Rutenberg, A, and Tal, D. (1987). “Lateral load response of belted tall building structures.” Engineering Structures, ELSEVIER, 9(1), pp. 53–67.
Sattar, M. A. Rao, S. Mohan, M. and Reddy, S. (2014). “Deflection control in high rise building using belt truss and outrigger systems.” International Journal of Applied Sciences, Engineering and Management, 3(6), pp. 44–53.
Shivacharan, K. Chandrakala, S. and Karthik, N. M. (2015). “Optimum position of outrigger system for tall vertical irregularity structures.” ISOR Journal of Mechanical and Civil Engineering, 12(2), pp. 54–63.
Stanford Smith, B. and Salim, I. (1981). “Parameter study of outrigger-braced tall building structures.” Journal of the Structural Division, ASCE, 107(10), pp. 2001–2014.
Stanford Smith, B. and Salim, I. (1983). “Formulae for optimum drift resistance of outrigger braced tall building structures.” Computers & Structures, ELSEVIER, 17(1), pp. 45–50.
Stafford Smith, B. and Coull, A. (1991). Tall building structures: Analysis and design. John Wiley & Sons, New York, N.Y., USA.
Taranath, B. S. (1974). “Optimum belt truss locations for high-rise structures.” Engineering Journal, AISC, 11(1), pp. 18–21.
Taranath, B. S. (1998). Steel, concrete, and composite design of tall buildings. McGraw-Hill, New York, N.Y., USA.
Taranath, B. S. (2012). Structural analysis and design of tall buildings: Steel and composite construction. Taylor & Francis, CRC Press, New York, N.Y., USA.
Wu, J. R. and Li, Q. S. (2003). “Structural performance of multi-outrigger braced tall buildings.” The Structural Design of Tall and Special Buildings, John Wiley & Sons, 12(2), pp. 155–176.
Zhang, J. Zhang, Z. X. Zhao, W. G. Zhu, H. P. and Zhou, C. S. (2007). “Safety analysis of optimal outriggers location in high-rise building structures.” Journal of Zhejiang University Science A, Springer, 8(2), pp. 264–269.