Determination by nanoindentation of elastic modulus and hardness of pure constituents of Portland cement clinker
Tóm tắt
Từ khóa
Tài liệu tham khảo
Richard, 1992, Composition of reactive powder concretes, Cem. Concr. Res., 25, 1501, 10.1016/0008-8846(95)00144-2
Cheyrezy, 1995, Microstructural analysis of RPC (reactive powder concrete), Cem. Concr. Res., 25, 1491, 10.1016/0008-8846(95)00143-Z
A. Boumiz, Etude comparée des évolutions chimiques et mécaniques des pâtes de ciment et mortiers à très jeune âge, PhD thesis, Université Denis Diderot, Paris 7, France, 1995.
J.L. Granju, Modélisation des pates de ciments durcies: Caractérisation de l'état d'hydratation, lois d'évolution de la résistance en compression et du module de déformation longitudinale, PhD thesis, Université Paul Sabatier de Toulouse, France, 1987.
Taylor, 1997, 8
Oliver, 1992, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res., 7, 1564, 10.1557/JMR.1992.1564
Oliver, 1992, On the generality of the relationship among contact stiffness, contact area and elastic modulus during indentation, J. Mater. Res., 7, 613, 10.1557/JMR.1992.0613
L. Boudoukha, Etude par nanoindentation de l'effet de l'implantation ionique sur le comportement mécanique de céramiques, Thèse de doctorat, INSA-Lyon 1, 1996.
Sneddon, 1967, The relation between load and penetration in the axisymmetric Boussinesq problem for a punch of arbitrary profile, Int. J. Eng. Sci., 3, 47, 10.1016/0020-7225(65)90019-4
Spinner, 1961, A method for determining mechanical resonance frequencies and for calculating elastic moduli from these frequencies, vol. 61, 25
Brunarsky, 1969, Recommendations for the use of resonance methods for testing concretes, Mater. Struct., 2, 269
Powers, 1960, Properties of cement Portland concrete, vol. 2, 571