Design variables influencing the fatigue of Al 2024-T3 in riveted aircraft lap joints: Squeeze force and initial fit tolerance

Fersini, 2007, Fatigue behaviour of Al2024-T3 friction stir welded lap joints, Eng Fract Mech, 74, 468, 10.1016/j.engfracmech.2006.07.010 Braga, 2019, Fatigue performance of hybrid overlap friction stir welding and adhesive bonding of an Al-Mg-Cu alloy, Fatigue Fract Eng Mater Struct, 42, 1262, 10.1111/ffe.12933 Skorupa, 2012 Muller RPG. An experimental and analytical investigation on the fatigue behaviour of fuselage riveted lap joints: The significance of the rivet squeeze force, and a comparison of 2024-T3 and Glare 3, Phd thesis; 1995. Rans, 2007, Riveting process induced residual stresses around solid rivets in mechanical joints, J Aircraft, 44, 323, 10.2514/1.23684 Yu, 2019, Residual stress and fatigue behavior of riveted lap joints with various riveting sequences, rivet patterns, and pitches, Proc Inst Mech Eng, Part B: J Eng Manuf, 233, 2306, 10.1177/0954405419834481 Zheng, 2016, Analysis of residual stresses induced by riveting process and fatigue life prediction, J Aircraft, 53, 1431, 10.2514/1.C033715 Zhou, 2018, Experimental investigation and finite element analysis on fatigue behavior of aluminum alloy 7050 single-lap joints, J Mater Eng Perform, 27, 915, 10.1007/s11665-018-3137-9 Skorupa, 2015, Fatigue strength reduction factors at rivet holes for aircraft fuselage lap joints, Int J Fatigue, 80, 417, 10.1016/j.ijfatigue.2015.06.025 Skorupa, 2017, Fatigue life predictions for riveted lap joints, Int J Fatigue, 94, 41, 10.1016/j.ijfatigue.2016.09.007 Zeng, 2016, The effect of residual stress due to interference fit on the fatigue behavior of a fastener hole with edge cracks, Eng Fail Anal, 66, 72, 10.1016/j.engfailanal.2016.04.012 Fu, 2015, Cold expansion technology of connection holes in aircraft structures: A review and prospect, Chin J Aeronaut, 28, 961, 10.1016/j.cja.2015.05.006 Wang X, Xu W, Zhang XJ, Zhang LN, Hu BR. Numerical prediction and experimental verification of fatigue life of TC4 plate strengthened by cold expansion. Zhejiang Daxue Xuebao (Gongxue Ban)/J Zhejiang Univ (Eng Sci) 2017;5(18):1610- 18. Zou, 2017, Influence of interference-fit percentage on stress and damage mechanism in hi-lock pin installation process of cfrp, J Compos Mater, 51, 3525, 10.1177/0021998316689601 Syed, 2017, Fatigue performance of bonded crack retarders in the presence of cold worked holes and interference-fit fasteners, Int J Fatigue, 105, 111, 10.1016/j.ijfatigue.2017.08.023 Vallieres, 2015, Fatigue life of cold-expanded fastener holes with interference-fit fasteners at short edge margins, Fatigue Fracture Eng Mater Struct, 38, 574, 10.1111/ffe.12257 Esmaeili-Goldarag, 2018, An experimental and numerical investigation of clamping force variation in simple bolted and hybrid (bolted-bonded) double lap joints due to applied longitudinal loads, Eng Fail Anal, 91, 327, 10.1016/j.engfailanal.2018.04.047 Abd-Elhady, 2018, Effect of clamping force and coefficient of friction on the elastic-plastic behavior of cracked bolted joint, Ain Shams Eng J, 9, 3113, 10.1016/j.asej.2018.04.001 Jiménez-Peña, 2017, Investigations on the fretting fatigue failure mechanism of bolted joints in high strength steel subjected to different levels of pre-tension, Tribol Int, 108, 128, 10.1016/j.triboint.2016.11.014 Esmaeili, 2015, Fatigue life estimation of double lap simple bolted and hybrid (bolted/bonded) joints using several multiaxial fatigue criteria, Mater Des, 67, 583, 10.1016/j.matdes.2014.11.003 Abazadeh, 2019, An estimation of fatigue crack initiation and growth lives of Al 2024–T3 in double lap bolted joints with interference fitted holes, Eng Fail Anal, 105, 1018, 10.1016/j.engfailanal.2019.07.054 Ghorbani, 2016, On the estimation of fatigue life in bolt clamped Al-alloy 2024-T3 plates, Eng Fract Mech, 164, 74, 10.1016/j.engfracmech.2016.07.001 Abazadeh, 2013, Effect of interference fitting and/or bolt clamping on the fatigue behavior of Al alloy 2024–T3 double shear lap joints in different cyclic load ranges, Int J Mech Sci, 72, 2, 10.1016/j.ijmecsci.2013.03.001 Chakherlou, 2012, Effect of cold expansion on the fatigue life of Al 2024-T3 in double shear lap joints: Experimental and numerical investigations, Mater Des, 33, 185, 10.1016/j.matdes.2011.07.024 Wei, 2013, The effect of interference fit size on the fatigue life of bolted joints in composite laminates, Compos Part B: Eng, 53, 62, 10.1016/j.compositesb.2013.04.048 Hao, 2012, Experimental research of best interference fit level on automatic drilling and riveting, Aeronaut Manuf Technol, 77 Zhang, 2014, Effect of interference-fit on load amplitude of a single central holed tensile plate, Acta Aeronautica ET Astronautica Sinica, 35, 1643 Zeng, 2015, Influence of initial fit tolerance and squeeze force on the residual stress in a riveted lap joint, Int J Adv Manuf Technol, 81, 1643, 10.1007/s00170-015-7235-7 Rans, 2009, Assessing the effects of riveting induced residual stresses on fatigue crack behaviour in lap joints by means of fractography, Int J Fatigue, 31, 300, 10.1016/j.ijfatigue.2008.08.005 Iyer, 2001, Influence of interference and clamping on fretting fatigue in single rivet-row lap joints, J Tribol, 123, 686, 10.1115/1.1352746 Bulloch, 2010, A detailed study of the relationship between fatigue crack growth rate and striation spacing in a range of low alloy ferritic steels, Eng Fail Anal, 17, 168, 10.1016/j.engfailanal.2009.04.028 Stanley, 2016, Reconstruction of fatigue crack growth in AA2024-T3 and AA2198-T8 fastened lap joints, Theoret Appl Fract Mech, 82, 33, 10.1016/j.tafmec.2015.06.006 Siegl, 2009, Fatigue crack growth history in damage tolerance design of aircraft structures, Int J Fatigue, 31, 1062, 10.1016/j.ijfatigue.2008.05.006 Nedbal, 1989, 3483 Nedbal, 2008, Fractographic reconstitution of fatigue crack history - Part I, Fatigue Fract Eng Mater Struct, 31, 164, 10.1111/j.1460-2695.2007.01211.x Skorupa, 2014, Fatigue crack location and fatigue life for riveted lap joints in aircraft fuselage, Int J Fatigue, 58, 209, 10.1016/j.ijfatigue.2013.01.014 Skorupa, 2010, Effect of production variables on the fatigue behaviour of riveted lap joints, Int J Fatigue, 32, 996, 10.1016/j.ijfatigue.2009.11.007 Chakherlou, 2009, Experimental and numerical investigations into the effect of an interference fit on the fatigue life of double shear lap joints, Eng Fail Anal, 16, 2066, 10.1016/j.engfailanal.2009.01.009 Naidu, 2005, Effect of contact pressure on fretting fatigue behaviour of Al–Mg–Si alloy AA6061, Int J Fatigue, 27, 283, 10.1016/j.ijfatigue.2004.07.001 Jin, 2004, Effects of slip on fretting behavior: experiments and analyses, Wear, 256, 671, 10.1016/S0043-1648(03)00510-6