Design optimization of multifunctional metamaterials with tunable thermal expansion and phononic bandgap

Kadic, 2019, 3D metamaterials, Nat Rev Phys., 1, 198, 10.1038/s42254-018-0018-y Gharibi, 2020, Phononic crystals for sensing FAMEs with demultiplexed frequencies, J. Mol. Liq., 305, 112841, 10.1016/j.molliq.2020.112841 Ma, 2020, Thermal error compensation of linear axis with fixed-fixed installation, Int. J. Mech. Sci., 175, 105531, 10.1016/j.ijmecsci.2020.105531 Zhengchun, 2016, Design and application of composite platform with extreme low thermal deformation for satellite, Compos. Struct., 152, 693, 10.1016/j.compstruct.2016.05.073 Li, 2018, Design of phononic crystals plate and application in vehicle sound insulation, Adv. Eng. Softw., 125, 19, 10.1016/j.advengsoft.2018.08.002 Qin, 2020, Design and optimization of the micro-vibration isolation system for large space telescope, J. Sound Vib., 482, 115461, 10.1016/j.jsv.2020.115461 Wu, 2020, Thermal/vibration joint experimental investigation on lightweight ceramic insulating material for hypersonic vehicles in extremely high-temperature environment up to 1500 °C, Ceram. Int., 46, 14439, 10.1016/j.ceramint.2020.02.241 Zhang, 2018, Soft mechanical metamaterials with unusual swelling behavior and tunable stress-strain curves, Sci. Adv., 4, eaar8535, 10.1126/sciadv.aar8535 Qu, 2017, Micro-Structured Two-Component 3D Metamaterials with Negative Thermal-Expansion Coefficient from Positive Constituents, Sci. Rep.-UK, 7 Wu, 2016, Isotropic Negative Thermal Expansion Metamaterials, ACS Appl. Mater. Inter., 8, 17721, 10.1021/acsami.6b05717 Ha, 2015, Controllable thermal expansion of large magnitude in chiral negative Poisson's ratio lattices: Controllable thermal expansion in chiral negative Poisson's ratio lattices, Phys. Status Solidi B, 252, 1431, 10.1002/pssb.201552158 Lakes, 2007, Cellular solids with tunable positive or negative thermal expansion of unbounded magnitude, Appl. Phys. Lett., 90, 221905, 10.1063/1.2743951 Lakes, 1996, Cellular solid structures with unbounded thermal expansion, J. Mater. Sci. Lett., 15, 475, 10.1007/BF00275406 Yu, 2019, Drastic tailorable thermal expansion chiral planar and cylindrical shell structures explored with finite element simulation, Compos. Struct., 210, 327, 10.1016/j.compstruct.2018.11.043 Wu, 2019, Mechanical design and multifunctional applications of chiral mechanical metamaterials: A review, Mater Design., 180, 107950, 10.1016/j.matdes.2019.107950 Wei, 2021, Additively manufactured bi-material metamaterial to program a wide range of thermal expansion, Mater Design., 198, 109343, 10.1016/j.matdes.2020.109343 Chen, 2020, A novel 3D structure with tunable Poisson’s ratio and tailorable coefficient of thermal expansion based on a tri-material triangle unit, Compos. Struct., 253, 112803, 10.1016/j.compstruct.2020.112803 Wei, 2018, Three dimensional lightweight lattice structures with large positive, zero and negative thermal expansion, Compos. Struct., 188, 287, 10.1016/j.compstruct.2018.01.030 Ai, 2017, Metamaterials with negative Poisson’s ratio and non-positive thermal expansion, Compos. Struct., 162, 70, 10.1016/j.compstruct.2016.11.056 Palumbo, 2011, Near-zero thermal expansivity 2-D lattice structures: Performance in terms of mass and mechanical properties, Acta Mater., 59, 2392, 10.1016/j.actamat.2010.12.037 Steeves, 2007, Concepts for structurally robust materials that combine low thermal expansion with high stiffness, J. Mech. Phys. Solids, 55, 1803, 10.1016/j.jmps.2007.02.009 Gibiansky, 1997, Thermal expansion of isotropic multiphase composites and polycrystals, J. Mech. Phys. Solids, 45, 1223, 10.1016/S0022-5096(96)00129-9 Oruganti, 2004, Thermal expansion behavior in fabricated cellular structures, Mat. Sci. Eng. A-Struct., 371, 24, 10.1016/S0921-5093(03)00054-6 Li, 2020, Robust topology optimization of thermoelastic metamaterials considering hybrid uncertainties of material property, Compos. Struct., 248, 112477, 10.1016/j.compstruct.2020.112477 Watts, 2017, Optimality of thermal expansion bounds in three dimensions, Extreme Mech. Lett., 12, 97, 10.1016/j.eml.2016.06.007 Takezawa, 2017, Design methodology for porous composites with tunable thermal expansion produced by multi-material topology optimization and additive manufacturing, Compos. Part B-Eng., 131, 21, 10.1016/j.compositesb.2017.07.054 Bendsøe, 1988, Generating optimal topologies in structural design using a homogenization method, Comput. Method Appl. M., 71, 197, 10.1016/0045-7825(88)90086-2 Zhou, 1991, The COC algorithm Part II: Topological, geometrical and generalized shape optimization, Comput. Method Appl. M., 89, 309, 10.1016/0045-7825(91)90046-9 Bendsøe, 1999, Material interpolation schemes in topology optimization, Arch. Appl. Mech., 69, 635, 10.1007/s004190050248 Sigmund, 2001, A 99 line topology optimization code written in Matlab, Struct. Multidisc. Optim., 21, 120, 10.1007/s001580050176 Luo, 2013, Topology optimization of structures using meshless density variable approximants, Int. J. Numer. Meth. Eng., 93, 443, 10.1002/nme.4394 Wang, 2003, A level set method for structural topology optimization, Comput. Meth. Appl. Mech. Engrg., 192, 227, 10.1016/S0045-7825(02)00559-5 Allaire, 2004, Structural optimization using sensitivity analysis and a level-set method, J. Comput. Phys., 194, 363, 10.1016/j.jcp.2003.09.032 Luo, 2008, A level set-based parameterization method for structural shape and topology optimization, Int. J. Numer. Meth. Eng., 76, 1, 10.1002/nme.2092 Takezawa, 2010, Shape and topology optimization based on the phase field method and sensitivity analysis, J. Comput. Phys., 229, 2697, 10.1016/j.jcp.2009.12.017 Guo, 2014, Doing Topology Optimization Explicitly and Geometrically-A New Moving Morphable Components Based Framework, J. Appl. Mech.-T ASME., 81, 10.1115/1.4027609 Ye, 2019, ICM method for topology optimization of multimaterial continuum structure with displacement constraint, Acta Mech. Sinica-PRC., 35, 552, 10.1007/s10409-018-0827-3 Y.K. Sui, H.L. Ye, X.R. Peng, Topological optimization of continuum structure with global stress constraints based on ICM method, Springer, Netherlands, 2006. Ye, 2014, Topological optimization of plate subjected to linear buckling constraints based on Independent Continuous Mapping method, Appl. Mech. Mater., 602-605, 139, 10.4028/www.scientific.net/AMM.602-605.139 Peng, 2021, Lightweight topology optimization with consideration of the fail-safe design principle for continuum structures, Eng. Optimiz., 53, 32, 10.1080/0305215X.2019.1697247 Xu, 2020, A novel 3-D structure with tunable Poisson's ratio and adjustable thermal expansion, Compos. Commun., 22, 100431, 10.1016/j.coco.2020.100431 Li, 2019, Novel 2D metamaterials with negative Poisson's ratio and negative thermal expansion, Extreme Mech. Lett., 30, 100498, 10.1016/j.eml.2019.100498 Wang, 2017, Level-set topology optimization for multimaterial and multifunctional mechanical metamaterials, Eng. Optimiz., 49, 22, 10.1080/0305215X.2016.1164853 Tao, 2020, 4D printed multi-stable metamaterials with mechanically tunable performance, Compos. Struct., 252, 112663, 10.1016/j.compstruct.2020.112663 Ren, 2021, SMP-based multi-stable mechanical metamaterials: From bandgap tuning to wave logic gates, Extreme Mech. Lett., 42, 101077, 10.1016/j.eml.2020.101077 Tao, 2020, 4D printed origami metamaterials with tunable compression twist behavior and stress-strain curves, Compos. Part B-Eng., 201, 108344, 10.1016/j.compositesb.2020.108344 Lv, 2020, A shape memory alloy-based tunable phononic crystal beam attached with concentrated masses, Phys. Lett. A, 384, 126056, 10.1016/j.physleta.2019.126056 Chen, 2021, Low-frequency tunable topological interface states in soft phononic crystal cylinders, Int. J. Mech. Sci., 191, 106098, 10.1016/j.ijmecsci.2020.106098 He, 2021, Inverse design of topological metaplates for flexural waves with machine learning, Mater. Des., 199, 109390, 10.1016/j.matdes.2020.109390 Yao, 2021, Topological phononic crystal plates with locally resonant elastic wave systems, Appl. Acoust., 177, 107931, 10.1016/j.apacoust.2021.107931 Muhammad, 2020, Lightweight architected lattice phononic crystals with broadband and multiband vibration mitigation characteristics, Extreme Mech. Lett., 41, 100994, 10.1016/j.eml.2020.100994 Qi, 2019, Bandgap and wave attenuation mechanisms of innovative reentrant and anti-chiral hybrid auxetic metastructure, Extreme Mech. Lett., 28, 58, 10.1016/j.eml.2019.02.005 Dong, 2017, Topology optimization of anisotropic broadband double-negative elastic metamaterials, J. Mech. Phys. Solids, 105, 54, 10.1016/j.jmps.2017.04.009 Huo, 2021, Experimental demonstration of valley-protected backscattering suppression and interlayer topological transport for elastic wave in three-dimensional phononic crystals, Mech. Syst. Signal Pr., 154, 107543, 10.1016/j.ymssp.2020.107543 Delpero, 2016, Structural engineering of three-dimensional phononic crystals, J. Sound Vib., 363, 156, 10.1016/j.jsv.2015.10.033 Dong, 2020, Robust 2D/3D multi-polar acoustic metamaterials with broadband double negativity, J. Mech. Phys. Solids, 137, 103889, 10.1016/j.jmps.2020.103889 Chen, 2021, Optimization study of bandgaps properties for two-dimensional chiral phononic crystals base on lightweight design, Phys. Lett. A, 388, 127054, 10.1016/j.physleta.2020.127054 Wang, 2019, Ultrawide band gap design of phononic crystals based on topological optimization, Phys. B, 571, 263, 10.1016/j.physb.2019.07.012 Han, 2020, Bandgap design of three-phase phononic crystal by topological optimization, Wave Motion, 93, 102496, 10.1016/j.wavemoti.2019.102496 Dong, 2021, Customized broadband pentamode metamaterials by topology optimization, J. Mech. Phys. Solids, 152, 104407, 10.1016/j.jmps.2021.104407 Li, 2020, Designing phononic crystal with anticipated band gap through a deep learning based data-driven method, Comput Method Appl M., 361, 112737, 10.1016/j.cma.2019.112737 Ye, 2021, Topology Optimization Design of Adjustable Thermal Expansion Metamaterial Based on Independent Continuous Variables, Int. J. Appl. Mech., 13, 2150032, 10.1142/S1758825121500320 Liu, 2014, An efficient 3D topology optimization code written in Matlab, Struct. Multidisc. Optim., 50, 1175, 10.1007/s00158-014-1107-x Andreassen, 2014, How to determine composite material properties using numerical homogenization, Comp. Mater. Sci., 83, 488, 10.1016/j.commatsci.2013.09.006 Wang, 2007, Review of metamodeling techniques in support of engineering design optimization, J. Mech. Design., 129, 370, 10.1115/1.2429697 Zhang, 2021, Mechanical behavior of composite bistable shell structure and surrogate-based optimal design, Struct. Multidisc. Optim., 64, 303, 10.1007/s00158-021-02890-7 Ye, 2017, Optimal design of a three tape-spring hinge deployable space structure using an experimentally validated physics-based model, Struct. Multidisc. Optim., 56, 973, 10.1007/s00158-017-1810-5