Design of tensegrity structures for supporting deployable mesh antennas

Fleeter, 1992, Design of low-cost spacecraft, 767 Knight, B.F. “Deployable antenna kinematics using tensegrity structure design”, Ph.D. Thesis, University of Florida (2000). Tibert, A.G. “Deployable tensegrity structures for space applications”, Ph.D. Thesis, Royal Institute of Technology, Department of Mechanics, Stockholm, Sweden (2002). Tibert, 2002, Deployable tensegrity reflectors for small satellites, Journal of Spacecraft and Rockets, 39, 701, 10.2514/2.3867 Tibert, 2003, Optimal design of tension truss antennas Miura, K. “Concept of tension activated cable lattice antenna”, IAF, International Astronautical Congress, 37th, Innsbruck, Austria (1986). Thomson, M.W., et al. “Light-weight reflector for concentrating radiation”, US Patent 5,680,145 (1997). Thomson, M.W. “The AstroMesh deployable reflector”, Antennas and Propagation Society International Symposium, IEEE (1999). Hirosawa, 2002, Space VLBI satellite HALCA and its engineering accomplishments, Acta Astronautica, 50, 301, 10.1016/S0094-5765(01)00171-0 Eriksson, 2006, Redundant and force-differentiated systems in engineering and nature, Computer Methods in Applied Mechanics and Engineering, 195, 5437, 10.1016/j.cma.2005.11.007 Li, 2009, Performance relationships between ground model and space prototype of deployable space antennas, Acta Astronautica, 65, 1383, 10.1016/j.actaastro.2009.03.037 Meguro, 2003, Key technologies for high-accuracy large mesh antenna reflectors, Acta Astronautica, 53, 899, 10.1016/S0094-5765(02)00211-4 Meguro, 2009, In-orbit deployment characteristics of large deployable antenna reflector onboard engineering test satellite VIII, Acta Astronautica, 65, 1306, 10.1016/j.actaastro.2009.03.052 Motro, 1996, Structural morphology of tensegrity systems, International Journal of Space Structures, 11, 233, 10.1177/026635119601-228 Motro, 2003 Pugh, 1976 Skelton, 2009 Guan, 2006, Static analysis of synchronism deployable antenna, Journal of Zhejiang University. Science A, 7, 1365, 10.1631/jzus.2006.A1365 Estrada, 2006, Numerical form-finding of tensegrity structures, International Journal of Solids and Structures, 43, 6855, 10.1016/j.ijsolstr.2006.02.012 Calladine, 1978, Buckminster Fuller’s tensegrity structures and Clerk Maxwell’s rules for the construction of stiff frames, International Journal of Solids and Structures, 14, 161, 10.1016/0020-7683(78)90052-5 Bing, 2004 Galambos, 1998 Hedgepeth, 1991, Design of large lightweight precise mesh reflector structures Plantema, F.J. “Collapsing stress of circular cylinders and round tubes”, Report S.280, National Luchtfaart Laboratorium, Amsterdam (1946).