Design of one-dimensional acoustic metamaterials using machine learning and cell concatenation

Structural and Multidisciplinary Optimization - Tập 63 - Trang 2399-2423 - 2021
Rih-Teng Wu1, Ting-Wei Liu2, Mohammad R. Jahanshahi1,3, Fabio Semperlotti2
1Lyles School of Civil Engineering, Purdue University, West Lafayette, USA
2Ray W. Herrick Laboratories, School of Mechanical Engineering, Purdue University, West Lafayette, USA
3School of Electrical and Computer Engineering (Courtesy), Purdue University, West Lafayette, USA

Tóm tắt

Metamaterial systems have opened new, unexpected, and exciting paths for the design of acoustic devices that only few years ago were considered completely out of reach. However, the development of an efficient design methodology still remains challenging due to highly intensive search in the design space required by the conventional optimization-based approaches. To address this issue, this study develops two machine learning (ML)-based approaches for the design of one-dimensional periodic and non-periodic metamaterial systems. For periodic metamaterials, a reinforcement learning (RL)-based approach is proposed to design a metamaterial that can achieve user-defined frequency band gaps. This RL-based approach surpasses conventional optimization-based methods in the reduction of computation cost when a near-optimal solution is acceptable. Leveraging the capability of exploration in RL, the proposed approach does not require any training datasets generation and therefore can be deployed for online metamaterial design. For non-periodic metamaterials, a neural network (NN)-based approach capable of learning the behavior of individual material units is presented. By assembling the NN representation of individual material units, a surrogate model of the whole metamaterial is employed to determine the properties of the resulting assembly. Interestingly, the proposed approach is capable of modeling different metamaterial assemblies satisfying user-defined properties while requiring only a one-time network training procedure. Also, the NN-based approach does not need a pre-defined number of material unit cells, and it works when the physical model of the unit cell is not well understood, or the situation where only the sensor measurements of the unit cell are available. The robustness of the proposed two approaches is validated through numerical simulations and design examples.

Tài liệu tham khảo