Design of a telescopic tower for wind energy production with reduced environmental impact

Bhandari, B., Ahn, S. H., & Ahn, T. B. (2016). Optimization of hybrid renewable energy power system for remote installations: Case studies for mountain and island. International Journal of Precision Engineering and Manufacturing,17(6), 815–822.

Abu-Hamdeh, N. H., & Almitani, K. H. (2017). Construction and numerical analysis of a collapsible vertical axis wind turbine. Energy Conversion and Management,151, 400–413.

Staudt, L. (2010). Design and development of small wind turbines. In Chapter of the book “WIT Transactions on State of the Art in Science and Engineering” (Vol. 44). Southampton: WIT Press. https://doi.org/10.2495/978-1-84564-205-1/07 .

Gwon, T. (2011). Structural analyses of wind turbine tower for 3 kW horizontal-axis wind turbine. Thesis. San Luis Obispo: California Polytechnic State University, August 9.

Ganser, H., Mamayek, S., Samaroo, M., & Wolkiewicz, D. (2014). Design framework for comparing wind turbine erection methods. Thesis, Worcester Polytechnic Institute, April 10.

“Small Wind Guidebook”, Web page, WINDExchange. (2018). https://windexchange.energy.gov/small-wind-guidebook#parts . Accessed 29 Dec 2018.

“Gaia-Wind Cook up Self Raising Tower”, Web page, FarmingUK, 14 August. (2013). https://www.farminguk.com/news/Gaia-Wind-Cook-up-Self-Raising-Tower-_26232.html . Accessed 29 Dec 2018.

“PMM telescopic masts with pressurized air elevation 9 m/10 m”, Online Brochure, Wimo.com. (2018). https://www.wimo.com/mast-pneumatic_e.html . Accessed 29 Dec 2018.

“Telescopic mast and tower elevation solutions”, Online Brochure, Will-Burt Company. (2018). https://www.willburt.com/download/product_brochures/Telescopic-Mast-And-Tower-Elevation-Solutions-Product-Brochure.pdf . Accessed 29 Dec 2018.

Sundin, E. “Telescopic Mast”, US Patent 4580377.

Brannan, P., & Spraggon, M. “Telescopic Mast”, UK Patent 2497921.

Creaser Jr., C.W., Hollis N.H., “Telescoping Lightweight Antenna Tower Assembly and the Like”. US Patent US5101215A.

Gremillion, E.J. “Extendable antenna mast with independent retracting and lifting cables”. US Patent 4785309.

“ITS Telescopic Tower Systems”. (2018). Online Brochure, Integrated Tower Systems Inc. http://www.itstowers.com/files/FIXED%20FOUNDATION%20TOWERS%20R21716.pdf . Accessed 29 Dec 2018.

Van Treuren, K.W. (2016). “Small horizontal axis wind turbines: Current status and future challenges”. In Proceedings of the ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition (Vol. 9), Seoul, South Korea, June 13–17.

Bang, H. J., Kim, H. I., & Lee, K. S. (2012). Measurement of strain and bending deflection of a wind turbine tower using arrayed FBG sensors. International Journal of Precision Engineering and Manufacturing,13(12), 2121–2126.

Bhandari, B., Poudel, S. R., Lee, K. T., & Ahn, S. H. (2014). Mathematical modeling of hybrid renewable energy system: A review on small hydro-solar-wind power generation. International Journal of Precision Engineering and Manufacturing,1(2), 157–173.

Lee, K. S., & Bang, H. J. (2012). A study on the prediction of lateral buckling load for wind turbine tower structures. International Journal of Precision Engineering and Manufacturing,13(10), 1829–1836.

Oh, Y., Kim, K., Kim, H., & Paek, I. (2015). Control algorithm of a floating wind turbine for reduction of tower loads and power fluctuation. International Journal of Precision Engineering and Manufacturing,16(9), 2041–2048.

Baek, J.-H., Kim, C.-W., Kim, Y.-C., Park, H.-C., Shi, W., & Shin, H.-K. (2012). Study on the marine growth effect on the dynamic response of offshore wind turbines. International Journal of Precision Engineering and Manufacturing,13(7), 1167–1176.

Shi, W., Park, H. C., Chung, C. W., Shin, H. K., Kim, S. H., Lee, S. S., et al. (2015). Soil-structure interaction on the response of jacket-type offshore wind turbine. International Journal of Precision Engineering and Manufacturing,2(2), 139–148.

Wang, Q., Zhou, H., & Wan, D. (2012). Numerical simulation of wind turbine blade-tower interaction. Journal of Marine Science and Application,11(3), 321–327.

Wang, X., Chen, T., Zhao, Q., Yuan, G., & Liu, J. (2016). Fatigue evaluation of grouted connections under bending moment in offshore wind turbines based on ABAQUS scripting interface. The International Journal of Steel Structures,16(4), 1149–1159.

Ryzhenkov, M. A., Ermolenko, B. V., & Ermolenko, G. V. (2011). Environmental problems of wind power engineering. Thermal Engineering,58(11), 962–969.

Axisa, R., Muscat, M., Sant, T., & Farrugia, R. N. (2017). Structural assessment of a lattice tower for a small, multi-bladed wind turbine. The International Journal of Energy and Environmental Engineering,8(4), 343–358.

Uys, P. E., Farkas, J., J´armai, K., & van Tonder, F. (2007). Optimisation of a steel tower for a wind turbine structure. Engineering Structures,29, 1337–1342.

Lagaros, N. D., & Karlaftis, M. G. (2016). Life-cycle cost structural design optimization of steel wind towers. Computers and Structures,174, 122–132.

Dimopoulos, C. A., & Gantes, C. J. (2013). Comparison of stiffening types of the cutout in tubular wind turbine towers. Journal of Constructional Steel Research,83, 62–74.

Darrow, J., Johnson, K., & Wright, A. (2011). Design of a tower and drive train damping controller for the three-bladed controls advanced research turbine operating in design-driving load cases. Wind Energy,14, 571–601.

Ning, Andrew, & Petch, Derek. (2016). Integrated design of downwind land-based wind turbines using analytic gradients. Wind Energy,19, 2137–2152.

Soman, Rohan N., Malinowski, Pawel H., & Ostachowicz, Wieslaw M. (2016). Bi-axial neutral axis tracking for damage detection in wind-turbine towers. Wind Energy,19, 639–650.

Kenna, A., & Basu, B. (2015). A finite element model for pre-stressed or post-tensioned concrete wind turbine towers. Wind Energy,18, 1593–1610.

Liu, W. (2016). Design and kinetic analysis of wind turbine blade-hub-tower coupled system. Renewable Energy,94, 547–557.

Rebelo, C., Moura, A., Gervásio, H., Veljkovic, M., & Simões da Silva, L. (2014). Comparative life cycle assessment of tubular wind towers and foundations—Part 1: Structural design. Engineering Structures,74, 283–291.

Hu, Y., Baniotopoulos, C., & Yang, J. (2014). Effect of internal stiffening rings and wall thickness on the structural response of steel wind turbine towers. Engineering Structures,81, 148–161.

Chen, K., Song, M. X., & Zhang, X. (2013). The investigation of tower height matching optimization for wind turbine positioning in the wind farm. Journal of Wind Engineering and Industrial Aerodynamics,114, 83–95.

Sarkar, A., & Gudmestad, O. T. (2013). Study on a new method for installing a monopile and a fully integrated offshore wind turbine structure. Marine Structures,33, 160–187.

Brodersen, M. L., & Høgsber, J. (2014). Damping of offshore wind turbine tower vibrations by a stroke amplifying brace. Energy Procedia,53, 258–267.

Perelmuter, A., & Yurchenko, V. (2013). Parametric optimization of steel shell towers of high-power wind turbines. Procedia Engineering,57, 895–905.

Fujiyama, C., Yonetsu, K., Maeshima, T., & Koda, Y. (2014). Identifiable stress state of wind turbine tower-foundation system based on field measurement and FE analysis. Procedia Engineering,95, 279–289.

Sintra, H., Mendes, V. M. F., & Melício, R. (2014). Modeling and simulation of wind shear and tower shadow on wind turbines. Procedia Technology,17, 471–477.

van der Zee, T., Jan de Ruiter, M., & Wieling, I. (2017). The C-Tower project—A composite tower for offshore wind turbines. Energy Procedia,137, 401–405.

Fitzgerald, B., Sarkar, S., & Staino, A. (2018). Improved reliability of wind turbine towers with active tuned mass dampers (ATMDs). Journal of Sound and Vibration,419, 103–122.

Zhang, R., Zhao, Z., & Dai, K. (2019). Seismic response mitigation of a wind turbine tower using a tuned parallel inerter mass system. Engineering Structures,180, 29–39.

Nezamolmolki, D., & Shooshtari, A. (2016). Investigation of nonlinear dynamic behavior of lattice structure wind turbines. Renewable Energy,97, 33–46.

Cheng, Y., Xue, Z., Jiang, T., Wang, W., & Wang, Y. (2018). Numerical simulation on dynamic response of flexible multi-body tower blade coupling in large wind turbine. Energy,152, 601–612.

Kang, W., Zhang, C., & Yu, J. (2016). Stochastic extreme motion analysis of jack-up responses during wet towing. Ocean Engineering,111, 56–66.

Cao, Y., Nie, W., Hu, X., Zhang, S., Meng, Z., Xin, L., et al. (2016). Parameter sensitivity study of dynamic response for jack-ups by FEM analysis. Ocean Engineering,124, 125–134.

Technical Specifications. (2012). Wind turbine Libellula 55 kW, ARIA S.r.l., Viale Vittorio Veneto 60, 59100 Prato, Italy, rev.4 del 23/10/2012.