Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Tóm tắt
Từ khóa
Tài liệu tham khảo
2015
2015
2015
2015
2015
2015
2015
2015
Abbaszadeh, 2009
Aherwar, 2013, A Review Paper on Rapid Prototyping and Rapid Tooling Techniques for Fabrication of Prosthetic Socket
Ahmadi, 2015, Additively Manufactured Open-Cell Porous Biomaterials Made from Six Different Space-Filling Unit Cells: The Mechanical and Morphological Properties, Materials, 8, 1871, 10.3390/ma8041871
Ahuja, 2015, Additive Manufacturing in Production: Challenges and Opportunities, 935304
Ahuja, 2015, High Power Laser Beam Melting of Ti6Al4V on Deformed Sheet Metal to Achieve Hybrid Structures, 93530X
Allen, 2006
Almeida, 2013, Nano CAD Design of Scaffolds Based on Triple Periodic Surfaces
Altaf, 2013, Prototype Production and Experimental Analysis for Circular and Profiled Conformal Cooling Channels in Aluminium Filled Epoxy Injection Mould Tools, Rapid Prototyp. J., 19, 220, 10.1108/13552541311323236
Alves, 2013, BioFab Toolbox – Software Tools for Biofabrication
2015
Anderson, 2014
Arafat, 2014, State of the Art and Future Direction of Additive Manufactured Scaffolds-Based Bone Tissue Engineering, Rapid Prototyp. J., 20, 13, 10.1108/RPJ-03-2012-0023
2015
Aremu, 2010, Suitability of SIMP and BESO Topology Optimization Algorithms for Additive Manufacture
Armillotta, 2008, Modeling of Porous Structures for Rapid Prototyping of Tissue Engineering Scaffolds, Int. J. Adv. Manuf. Technol., 39, 501, 10.1007/s00170-007-1247-x
Armillotta, 2013, A Tool for Computer-Aided Orientation Selection in Additive Manufacturing Processes
ASTM F2792-12a Standard Terminology for Additive Manufacturing Technologies.
ASTM F3049-14 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes.
ASTM F3122-14: Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes.
Atzeni, 2012, Economics of Additive Manufacturing for End-Usable Metal Parts, Int. J. Adv. Manuf. Technol., 62, 1147, 10.1007/s00170-011-3878-1
Atzeni, 2013
Azman, 2014
Babaee, 2013, 3D Soft Metamaterials with Negative Poisson's Ratio, Adv. Mater., 25, 5044, 10.1002/adma.201301986
Barlage, 1992, Fiber/Resin Composite Manufacturing Using Solid Freeform Fabrication, 15
Barlier, 2015
Bartkowiak, 2015, Multi-Scale Areal Curvature Analysis of Fused Deposition Surfaces
Bartolo, 2012, Biomedical Production of Implants by Additive Electro-Chemical and Physical Processes, CIRP Ann. Manuf. Technol., 61, 635, 10.1016/j.cirp.2012.05.005
Baumers, 2012
Baumers, 2016, The Cost of Additive Manufacturing: Machine Productivity, Economies of Scale and Technology-Push, Technol. Forecas. Soc. Change, 102, 193, 10.1016/j.techfore.2015.02.015
Bauza, 2014, Study of Accuracy of Parts Produced Using Additive Manufacturing, 13
Beaman, 1997
Becker, 2009, Rapid Manufacturing in Automation Applications
Bernard, 2002, New Trends on Rapid Product Development, CIRP Ann. Manuf. Technol., 51, 635, 10.1016/S0007-8506(07)61704-1
Bernard, 2003, Integration of CAD and Rapid Manufacturing for Sand Casting Optimisation, Rapid Prototyp. J., 9, 327, 10.1108/13552540310502220
Bingham, 2007, Rapid Manufactured Textiles, Int. J. Comput. Integr. Manuf., 20, 96, 10.1080/09511920600690434
Boothroyd, 2005
Boothroyd, 2002
Booysen, 2011, Development of Patient-Specific Implants Using Direct Metal Laser Sintering in Titanium
Bourell, 2009, A Brief History of Additive Manufacturing and the 2009 Roadmap for Additive Manufacturing: Looking Back and Looking Ahead, 24
Brackett, 2011, Topology Optimization for Additive Manufacturing
Brown, 2016
Bückmann, 2014, On Three-Dimensional Dilational Elastic Metamaterials, New J. Phys., 16, 033032, 10.1088/1367-2630/16/3/033032
Burckel, 2010, Fabrication of 3D Metamaterial Resonators Using Self-Aligned Membrane Projection Lithography, Adv. Mater., 22, 3171, 10.1002/adma.200904153
Byun, 2003, Design of a New Test Part for Benchmarking the Accuracy and Surface Finish of Rapid Prototyping Processes, 731
Byun, 2005, Determination of the Optimal Part Orientation in Layered Manufacturing Using a Genetic Algorithm, Int. J. Prod. Res., 43, 2709, 10.1080/00207540500031857
Calì, 2012, 3D-Printing of Non-Assembly, Articulated Models, ACM Trans. Graph. (TOG), 31, 130, 10.1145/2366145.2366149
Calignano, 2014, Direct Fabrication of Joints Based on Direct Metal Laser Sintering in Aluminum and Titanium Alloys, Proc. CIRP, 21, 129, 10.1016/j.procir.2014.03.155
Campbell, 2003, The Potential for the Bespoke Industrial Designer, Des. J., 6, 24
Campbell, 2012, Additive Manufacturing: Rapid Prototyping Comes of Age, Rapid Prototyp. J., 18, 255, 10.1108/13552541211231563
Campbell, 2013, Adding Product Value Through Additive Manufacturing, 259
Canellidis, 2009, Genetic-Algorithm-Based Multi-Objective Optimization of the Build Orientation in Stereolithography, Int. J. Adv. Manuf. Technol., 45, 730
Cansizoglu, 2008, Applications of Structural Optimization in Direct Metal Fabrication, Rapid Prototyp. J., 14, 114, 10.1108/13552540810862082
Cartera, 2015, 1402
Castillo, 2005
Cerardi, 2011, Form Errors Estimation in Free-Form 2D and 3D Geometries, 15
Charan, 1993, Fabrication of Composite Prototypes by 3-D Photolithography, 15
Chekurov, 2014
Chen, 2015, Deformation Mechanisms in NiTi–Al Composites Fabricated by Ultrasonic Additive Manufacturing, Shape Mem. Superelast., 1, 294, 10.1007/s40830-015-0032-1
Chen, 2011, Joint Analysis in Rapid Fabrication of Non-Assembly Mechanisms, Rapid Prototyp. J., 17, 408, 10.1108/13552541111184134
Choi, 2010, Combined Micro and Macro Additive Manufacturing of a Swirling Flow Coaxial Phacoemulsifier Sleeve with Internal Micro-Vanes, Biomed. Microdevices, 12, 875, 10.1007/s10544-010-9442-1
Chu, 2008, Design for Additive Manufacturing of Cellular Structures, Comput. Aided Des. Appl., 5, 686, 10.3722/cadaps.2008.686-696
Chua, 2003
Ciraud, 1972
Cloots, 2013, Assessing New Support Minimizing Strategies for the Additive Manufacturing Technology SLM
Comellas, 2013
Cong, 2015, Effect of Arc Mode in Cold Metal Transfer Process on Porosity of Additively Manufactured Al–6.3% Cu Alloy, Int. J. Adv. Manuf. Technol., 76, 1593, 10.1007/s00170-014-6346-x
Conner, 2014, Making Sense of 3-D Printing: Creating a Map of Additive Manufacturing Products and Services, Addit. Manuf., 1, 64, 10.1016/j.addma.2014.08.005
Cooper, 2012, Additive Manufacturing for Product Improvement at Red Bull Technology, Mater. Des., 41, 226, 10.1016/j.matdes.2012.05.017
Cremascoli, 2009, Series Production of CE-Certified Orthopaedic Implants with Integrated Network Structures for Improved Bone Ingrowth
Crookston, 2008, Finite-Element Modelling of Mechanical Behaviour of Rapid Manufactured Textiles, Proc. Inst. Mech. Eng. L: J. Mater. Des. Appl., 222, 29
Czech, 2012, On the Accurate Analysis of Linear Elastic-Meta-Material Properties for Use in Design Optimization Problems, Compos. Sci. Technol., 72, 580, 10.1016/j.compscitech.2012.01.002
Dadbakhsh, 2012, In Situ Formation of Particle Reinforced Al Matrix Composite by Selective Laser Melting of Al/Fe2O3 Powder Mixture, Adv. Eng. Mater., 14
Danjou, 2009, Determination of Optimal Build Direction for Different Rapid Prototyping Applications
Dapino, 2014
Dapino, 2014, Smart Structure Integration Through Ultrasonic Additive Manufacturing
Darwish, 2014, Auxetic Cellular Structures for Custom Made Orthopedic Implants using Additive Manufacturing, Int. J. Eng. Adv. Technol. (IJEAT), 4
Deradjat, 2015, Implementation of Additive Manufacturing Technologies for Mass Customization
di Angelo, 2011, A Neural Network-Based Build Time Estimator for Layer Manufactured Objects, Int. J. Adv. Manuf. Technol., 57, 215, 10.1007/s00170-011-3284-8
Dias, 2014, Optimization of Scaffold Design for Bone Tissue Engineering: A Computational and Experimental Study, Med. Eng. Phys., 36, 448, 10.1016/j.medengphy.2014.02.010
Diegel, 2009, “3D Faxing”: Rapid Prototyping of New Product and Process Systems to Help Manage Multi-National Development Teams
Doubrovski, 2011, Optimal Design for Additive Manufacturing: Opportunities and Challenges
Doubrovski, 2012, First Steps Towards Collaboratively Edited Design for Additive Manufacturing Knowledge, 891
Eiríksson, 2015, Predicting Color Output of Additive Manufactured Parts, 95
EnvisionTEC GmbH, 2015
EnvisionTEC GmbH, 2015
EnvisionTEC GmbH, 2015
EnvisionTEC GmbH, 2015
EnvisionTEC GmbH, 2015
EOS GmbH, 2015
EOS GmbH, 2015
EOS GmbH, 2015
EOS GmbH, 2015
EOS GmbH, 2015
EOS GmbH, 2015
EOS GmbH, 2015
EOS GmbH, 2015
EOS GmbH, 2015
EOS GmbH, 2015
EOS GmbH, 2015
EOS GmbH, 2014
EOS GmbH, 2015
EOS GmbH, 2015
EOS GmbH, 2015
Es-Said, 2000, Effect of Layer Orientation on Mechanical Properties of Rapid Prototyped Samples, Mater. Manuf. Process., 15, 107, 10.1080/10426910008912976
ExOne Inc., 2015
ExOne Inc., 2015
Fernando, 2013
2013
Frank, 1995, Expert System Based Selection of the Preferred Direction of Build for Rapid Prototyping Processes, Special Issue on AI Applications in Design for Manufacturing and Concurrent Engineering, J. Intell. Manuf., 6, 334, 10.1007/BF00124677
Gao, 2010, Topology Optimization Involving Thermo-Elastic Stress Loads, Struct. Multidiscip. Optim., 42, 725, 10.1007/s00158-010-0527-5
Garcia, 2014
Garcia, 2011, Conformal Cooling in Moulds with Special Geometry
Gausemeier, 2011
Gaynor, 2014, Multiple-Material Topology Optimization of Compliant Mechanisms Created Via PolyJet Three-Dimensional Printing, J. Manuf. Sci. Eng., 136, 061015, 10.1115/1.4028439
2014
Gebhardt, 2011
Geraedts, 2012, Three Views on Additive Manufacturing: Business, Research and Education, 1
Ghorpade, 2007, Selection of Optimal Part Orientation in Fused Deposition Modelling Using Swarm Intelligence, Proc. Inst. Mech. Eng. B: J. Eng. Manuf., 221, 1209, 10.1243/09544054JEM771
Giannitelli, 2014, Current Trends in the Design of Scaffolds for Computer-Aided Tissue Engineering, Acta Biomater., 10, 580, 10.1016/j.actbio.2013.10.024
Gibbons, 2005, Direct Tool Steel Injection Mould Inserts through the Arcam Ebm Freeform Fabrication Process, Assem. Autom., 25, 300, 10.1108/01445150510626433
Gibson, 2010
Grenda, 2009
Griesbach, 2016, Rapid Technologien Toleranzmanagment
Grimm, 2010
Grzesiak, 2011, The Bionic Handling Assistant: A Success Story of Additive Manufacturing, Assem. Autom., 31, 329, 10.1108/01445151111172907
Gu, 2012, The Lattice Structure Configuration Design for Stereolithography Investment Casting Pattern Using Topology Optimization, Rapid Prototyp. J., 18, 353, 10.1108/13552541211250355
Gu, 2016, The effect of inter-layer cold working and post-deposition heat treatment on porosity in additively manufactured aluminum alloys, J. Mater. Process. Technol., 230, 26, 10.1016/j.jmatprotec.2015.11.006
Gu, 2016, The Strengthening Effect of Inter-Layer Cold Working and Post-Deposition Heat Treatment on the Additively Manufactured Al–6.3Cu Alloy, Mater. Sci. Eng. A, 651, 18, 10.1016/j.msea.2015.10.101
Hague, 2003, Implications on Design of Rapid Manufacturing, Proc. Inst. Mech. Eng. C: J. Mech. Eng. Sci., 217, 25, 10.1243/095440603762554587
Hague, 2004, Material and Design Considerations for Rapid Manufacturing, Int. J. Prod. Res., 42, 4691, 10.1080/00207840410001733940
Hao, 2011, Design and Additive Manufacturing of Cellular Lattice Structures, 249
Harrison, 2013, Micromotion and Friction Evaluation of a Novel Surface Architecture for Improved Primary Fixation of Cementless Orthopaedic Implants, J. Mech. Behav. Biomed. Mater., 21, 37, 10.1016/j.jmbbm.2013.01.017
Hascoët, 2011, From Functional Specifications to Optimized CAD Model: Proposition of a New DFAM Methodology, 467
Hengsbach, 2014, Direct Laser Writing of Auxetic Structures: Present Capabilities and Challenges, Smart Mater. Struct., 23, 085033, 10.1088/0964-1726/23/8/085033
Hernandez, 2013
Hiller, 2009, Multi Material Topological Optimization of Structures and Mechanisms
Hoerber, 2014, Approaches for Additive Manufacturing of 3D Electronic Applications, Proc. CIRP, 17, 806, 10.1016/j.procir.2014.01.090
Holmström, 2010, Rapid Manufacturing in the Spare Parts Supply Chain: Alternative Approaches to Capacity Deployment, J. Manuf. Technol. Manag., 21, 687, 10.1108/17410381011063996
Hopkinson, 2003, Analysis of Rapid Manufacturing – Using Layer Manufacturing Processes for Production, Proc. Inst. Mech. Eng. C: J. Mech. Eng. Sci., 217, 31, 10.1243/095440603762554596
Hopkinson, 2006
Huang, 2015, Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations, J. Manuf. Sci. Eng., 137, 014001, 10.1115/1.4028725
Hutmacher, 2000, Scaffolds in Tissue Engineering Bone and Cartilage, Biomaterials, 21, 2529, 10.1016/S0142-9612(00)00121-6
In’t Veld, 2015, Micro Additive Manufacturing Using Ultra Short Laser Pulses, CIRP Ann. Manuf. Technol., 64, 4
2010
ISO 1101, 2012
2015
2014
ISO ASTM/DIS 20195:2015(E), 2015
ISO/TC 261 and ASTM F42, 2013
Jahnke, 2013, Potentials of Additive Manufacturing to Prevent Product Piracy
Järvinena, 2014, Characterization of Effect of Support Structures in Laser Additive Manufacturing of Stainless Steel, Physics Procedia, 56, 72
Jiang, 2012, Technological Shifts in Surface Metrology, CIRP Ann. Manuf. Technol., 61, 815, 10.1016/j.cirp.2012.05.009
Johnson, 2013, Additive Manufactured Textiles for High-Performance Stab Resistant Applications, Rapid Prototyp. J., 19, 199, 10.1108/13552541311312193
Karunakaran, 2010, Hybrid Rapid Manufacturing of Metallic Objects, Int. J. Rapid Manuf., 1, 433, 10.1504/IJRAPIDM.2010.036116
Kasperovich, 2015, Improvement of Fatigue Resistance and Ductility of TiAl6V4 Processed by Selective Laser Melting, J. Mater. Process. Technol., 220, 202, 10.1016/j.jmatprotec.2015.01.025
Kazanas, 2012, Fabrication of Geometrical Features Using Wire and Arc Additive Manufacture, Proc. IMechE B: J. Eng. Manuf., 10.1177/0954405412437126
Keating, 2013, Compound Fabrication: A Multi-Functional Robotic Platform for Digital Design and Fabrication, Robot. Comput. Integr. Manuf., 29, 439, 10.1016/j.rcim.2013.05.001
Kellens, 2011, Energy and Resource Efficiency of SLS/SLM Processes (Keynote Paper), 1
Kerbrat, 2011, A New DFM Approach to Combine Machining and Additive Manufacturing, Comput. Ind., 62, 684, 10.1016/j.compind.2011.04.003
Kermer, 1998, Colour Stereolithography for Planning Complex Maxillofacial Tumour Surgery, J. Cranio-Maxillofac. Surg., 26, 360, 10.1016/S1010-5182(98)80068-1
Khajavi, 2014, Additive Manufacturing in the Spare Parts Supply Chain, Comput. Ind., 65, 50, 10.1016/j.compind.2013.07.008
Khoshnevis, 2004, Automated Construction by Contour Crafting – Related Robotics and Information Technologies, Autom. Constr., 13, 5, 10.1016/j.autcon.2003.08.012
Khoshnevis, 2005, Lunar Contour Crafting – A Novel Technique for ISRU-Based Habitat Development, 7397
Khoshnevis, 2006, Mega-Scale Fabrication by Contour Crafting, Int. J. Ind. Syst. Eng., 1, 301
Kim, 2015, Streamlining the Additive Manufacturing Digital Spectrum: A Systems Approach, Addit. Manuf., 5, 20, 10.1016/j.addma.2014.10.004
Kiontke, 2015, Freeform Capability Enabled by ISO 10110
Klocke, 2014, Turbomachinery Component Manufacture by Application of Electrochemical, Electro-physical and Photonic Processes, CIRP Ann. Manuf. Technol., 63, 703, 10.1016/j.cirp.2014.05.004
Kolla, 2010, Design of Chiral Honeycomb Meso-Structures for High Shear Flexure
Kruth, 1991, Material Increase Manufacturing by Rapid Prototyping Techniques, CIRP Ann. Manuf. Technol., 40, 603, 10.1016/S0007-8506(07)61136-6
Kruth, 1998, Progress in Additive Manufacturing and Rapid Prototyping, CIRP Ann. Manuf. Technol., 47, 525, 10.1016/S0007-8506(07)63240-5
Kruth, 2005, Benchmarking of Different SLS/SLM Processes as Rapid Manufacturing Techniques
Kruth, 2007, Consolidation Phenomena in Laser and Power-Bed Based Layered Manufacturing, CIRP Ann. Manuf. Technol., 56, 730, 10.1016/j.cirp.2007.10.004
Kumar, 2012, Hybrid Layered Manufacturing Using Gas Metal Arc Weld (GMAW) Deposition, Int. J. Adv. Manuf. Syst., 14, 11
Kuo, 2001, Design for Manufacture and Design for ‘X’: Concepts, Applications, and Perspectives, Comput. Ind. Eng., 41, 241, 10.1016/S0360-8352(01)00045-6
2013
Leary, 2014, Optimal Topology for Additive Manufacture: A Method for Enabling Additive Manufacture of Support-Free Optimal Structures, Mater. Des., 63, 678, 10.1016/j.matdes.2014.06.015
Lehmhus, 2015, Cloud-Based Automated Design and Additive Manufacturing: A Usage Data-Enabled Paradigm Shift, Sensors, 15, 32079, 10.3390/s151229905
Levy, 2003, Rapid Manufacturing and Rapid Tooling with Layer Manufacturing (LM) Technologies, State of the Art and Future Perspectives, CIRP Ann. Manuf. Technol., 52, 10.1016/S0007-8506(07)60206-6
Li, 2006
Lieneke, 2015, Systematical Determination of Tolerances for Additive Manufacturing by Measuring Linear Dimensions, 371
Lindeman, 2012, Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers in Additive Manufacturing
Lindeman, 2014, Towards a Sustainable and Economic Selection of Part Candidates for Additive Manufacturing, Rapid Prototyp. J., 21
Lipton, 2015, Additive Manufacturing for the Food Industry, Trends Food Sci. Technol., 43, 114, 10.1016/j.tifs.2015.02.004
Lopes, 2012, Integrating Stereolithography and Direct Print Technologies for 3D Structural Electronics Fabrication, Rapid Prototyp. J., 18, 129, 10.1108/13552541211212113
Lutters, 2014, Tools and Techniques for Product Design, CIRP Ann. Manuf. Technol., 63, 607, 10.1016/j.cirp.2014.05.010
MacDonald, 2014, vol. 2, 234
Mahesh, 2004, Benchmarking for Comparative Evaluation of RP Systems and Processes, Rapid Prototyp. J., 10, 123, 10.1108/13552540410526999
Maheshwaraa, 2007, Design and Freeform Fabrication of Deployable Structures with Lattice Skins, Rapid Prototyp. J., 13, 213, 10.1108/13552540710776160
Maheshwaraa Namasivayam, 2011, Topology Design and Freeform Fabrication of Deployable Structures with Lattice Skins, Rapid Prototyp. J., 17, 5, 10.1108/13552541111098581
Maiwald, 2010, INKtelligent Printing® for Sensorial Applications, Sens. Rev., 30, 19, 10.1108/02602281011010763
Malone, 2004, Freeform Fabrication of Zinc-Air Batteries and Electromechanical Assemblies, Rapid Prototyp. J., 10, 58, 10.1108/13552540410512543
Marenda, 2013, Rapid Tooling for Individualized Silicon Aesthetic Prosthesis Manufacturing: A Case Study
Martina, 2014
Martina, 2015, Microstructure of Interpass Rolled Wire+Arc Additive Manufacturing Ti–6Al–4V Components, Metall. Mater. Trans. A, 46, 6103, 10.1007/s11661-015-3172-1
Martina, 2015
Masood, 2003, A Generic Algorithm for a Best Part Orientation System for Complex Parts in Rapid Prototyping, J. Mater. Process. Technol., 13, 110, 10.1016/S0924-0136(03)00190-0
Materialise, 2015
Materialise, 2015
Materialise, 2015
Materialise, 2015
Materialise, 2015
Materialise, 2016
Materialise, 2015
Materialise, 2015
Materialise, 2015
Mcor Technologies Ltd, 2015
Mcor Technologies Ltd, 2015
Mcor Technologies Ltd, 2015
Mcor Technologies Ltd, 2015
Mcor Technologies Ltd., 2015
Mehnen, 2008, Robust Multi-objective Optimisation of Weld Bead Geometry for Additive Manufacturing, 419
Mehnen, 2010, Design for Wire and Arc Additive Layer Manufacture
Mehnen, 2014, Design Study for Wire and Arc Additive Manufacture, Int. J. Prod. Dev., 19, 2, 10.1504/IJPD.2014.060028
Meisel, 2013, Multiple-Material Topology Optimization of Compliant Mechanisms Created via Polyjet 3d Printing
Mellor, 2014, Additive Manufacturing: A Framework for Implementation, Int. J. Prod. Econ., 149, 194, 10.1016/j.ijpe.2013.07.008
Mercelis, 2007
Minetola, 2011, Investigation of Wear Behaviour of FDM Fixtures
Minetola, 2016, Benchmarking of FDM Machines through Part Quality Using IT Grades, Proc. CIRP, 41, 1027, 10.1016/j.procir.2015.12.075
Mital, 2008
Mitchell, 2013, Direct Writing of Conductive Polymer Tracks as Part of an Additive Manufacturing Process
Modasdar, 2012
Molloy, 1991, Design for Assembly within Concurrent Engineering, CIRP Ann. Manuf. Technol., 40, 10.1016/S0007-8506(07)61945-3
Moroni, 2015, Functionality-Based Part Orientation for Additive Manufacturing
Morvan, 2001, Manufacturing of a Heterogeneous Flywheel on a LENS Apparatus
Mourtzis, 2014, Cloud-Based Integrated Shop-Floor Planning and Control of Manufacturing Operations for Mass Customisation (CIRP ICME 2014), Proc. CIRP, 33, 9, 10.1016/j.procir.2015.06.004
Mourtzis, 2015, Cloud-Based Adaptive Process Planning Considering Availability and Capabilities of Machine Tools, J. Manuf. Syst., 39, 1, 10.1016/j.jmsy.2016.01.003
Mourtzis, 2015, Cloud-Based Adaptive Shop-Floor Scheduling Considering Machine Tool Availability (ASME 2015)
Mourtzis, 2016, A Cloud-Based Approach for Maintenance of Machine Tools and Equipment Based on Shop-Floor Monitoring, Proc. CIRP, 41, 655, 10.1016/j.procir.2015.12.069
Moylan, 2012
Moylan, 2012, Proposal for a Standardized Test Artifact for Additive Manufacturing Machines and Processes, 902
Mueller, 2013, Resource-Efficient Hot Sheet Metal Forming by Innovative Die Cooling with Laser Beam Melted Tooling Components
Muir, 2013, Multidisciplinary Optimisation of a Business Jet Main Exit Door Hinge for Production by Additive Manufacturing
Munguía, 2011, A-Footprint: Ankle and Foot Orthotic Personalization via Rapid Manufacturing, CRC Press
Nakagawa, 1979, Blanking Tool by Stacked Bainite Steel Plates, Press Tech., 93
Nathan, 2015
Nezhad, 2009, Multi Objective Optimization of Part Orientation in Stereolithography
Nguyen, 2013, Heuristic Optimization Method for Cellular Structure Design of Light Weight Components, Int. J. Precis. Eng. Manuf., 14, 1071, 10.1007/s12541-013-0144-5
Ovsianikov, 2008, Two-Photon Polymerization of Hybrid Sol–Gel Materials for Photonics Applications, Laser Chem., 10.1155/2008/493059
Oxman, 2011, Variable Property Rapid Prototyping: Inspired by Nature, Where Form is Characterized by Heterogeneous Compositions, Virtual Phys. Prototyp., 6, 3, 10.1080/17452759.2011.558588
Pallari, 2010, Design and Additive Fabrication of Foot and Ankle-Foot Orthoses
Parthasarathy, 2011, A Design for the Additive Manufacture of Functionally Graded Porous Structures with Tailored Mechanical Properties for Biomedical Applications, J. Manuf. Process., 13, 160, 10.1016/j.jmapro.2011.01.004
Paterson, 2013
Paterson, 2015, Comparing Additive Manufacturing Technologies for Customised Wrist Splints, Rapid Prototyp. J., 21, 230, 10.1108/RPJ-10-2013-0099
Paulsen, 2012, Printing Conformal Electronics on 3D Structures with Aerosol Jet Technology, 1
Pedersen, 2014, Applicability of Chemical Vapour Polishing of Additive Manufactured Parts to Meet Production-Quality
Perez, 2013, Combining Additive Manufacturing and Direct Write for Integrated Electronics – A Review, 962
Pham, 2001
Phatak, 2012, Optimum Part Orientation in Rapid Prototyping Using Genetic Algorithm, J. Manuf. Syst., 31, 395, 10.1016/j.jmsy.2012.07.001
Pipes, 1982, Plotting the Progress of CAD/CAM: Falling Hardware Costs and Improved Software are Making CAD/CAM Systems More Attractive, Data Process., 24, 19, 10.1016/0011-684X(82)90054-5
Podshivalov, 2013, Design, Analysis and Additive Manufacturing of Porous Structures for Biocompatible Micro-Scale Scaffolds, Proc. CIRP, 5, 247, 10.1016/j.procir.2013.01.049
Poli, 2001
Ponche, 2012, A New Global Approach to Design for Additive Manufacturing, Virtual Phys. Prototyp., 7, 93, 10.1080/17452759.2012.679499
Ponche, 2014, A Novel Methodology of Design for Additive Manufacturing Applied to Additive Laser Manufacturing Process, Robot. Comput. Integr. Manuf., 30, 389, 10.1016/j.rcim.2013.12.001
Popat AH, Edwards MR (2000) U.S. Patent No. 6,133,336, Process for forming a colored three-dimensional article. U.S. Patent and Trademark Office, Washington, DC.
Poyraz, 2015, Investigation of Support Structures for Direct Metal Laser Sintering (DMLS) of IN625 Parts
Proto Labs, 2016
Ramani, 2011, Multi-Material Topology Optimization with Strength Constraints, Struct. Multidiscip. Optim., 43, 597, 10.1007/s00158-010-0581-z
Rännar, 2007, Efficient Cooling with Tool Inserts Manufactured by Electron Beam Melting, Rapid Prototyp., 13, 128, 10.1108/13552540710750870
Reinhart, 2012, Investigation of the Geometry-Dependent Anisotropic Material Behavior of Filigree Struts in ALM-Produced Lattice Structures, LANE 2012, Phys. Proc., 39, 471, 10.1016/j.phpro.2012.10.063
Rickenbacher, 2013, An Integrated Cost-Model for Selective Laser Melting (SLM), Rapid Prototyp. J., 19, 208, 10.1108/13552541311312201
Rochus, 2007, New Applications of Rapid Prototyping and Rapid Manufacturing (RP/RM) Technologies for Space Instrumentation, Acta Astronaut., 61, 352, 10.1016/j.actaastro.2007.01.004
Rosen, 2007, Computer-Aided Design for Additive Manufacturing of Cellular Structures, Comput. Aided Des. Appl., 4, 585, 10.1080/16864360.2007.10738493
Rosen, 2007, Design for Additive Manufacturing: A Method to Explore Unexplored Regions of the Design Space
Rozvany, 2009, A Critical Review of Established Methods of Structural Topology Optimization, Struct. Multidiscip. Optim., 37, 217, 10.1007/s00158-007-0217-0
Ruesenberg, 2014, A Method to Characterize the Quality of a Polymer Laser Sintering Process, Adv. Mech. Eng., 10.1155/2014/185374
Ruffo, 2006, An Empirical Laser Sintering Time Estimator for Duraform PA, Int. J. Prod. Res., 44, 10.1080/00207540600622522
Ruffo, 2006, Cost Estimation for Rapid Manufacturing-Laser Sintering Production for Low to Medium Volumes, Proc. Inst. Mech. Eng. B: J. Eng. Manuf., 220, 1417, 10.1243/09544054JEM517
Ruffo, 2007, Cost Estimation for Rapid Manufacturing – Simultaneous Production of Mixed Components Using Laser Sintering, Proc. Inst. Mech. Eng. B: J. Eng. Manuf., 221, 1585, 10.1243/09544054JEM894
Ruffo, 2007, Make or Buy Analysis for Rapid Manufacturing, Rapid Prototyp. J., 13, 23, 10.1108/13552540710719181
Rumpf, 2013, 3D Printed Lattices with Spatially Variant Self-Collimation, Prog. Electromagn. Res., 139, 1, 10.2528/PIER13030507
Sachs, 2000, Production of Injection Molding Tooling with Conformal Cooling Channels Using the Three Dimensional Printing Process, Polym. Eng. Sci., 40, 1232, 10.1002/pen.11251
Scheidler, 2014, Stiffness Tuning of FeGa Structures Manufactured by Ultrasonic Additive Manufacturing. In SPIE Smart Structures and Materials+Nondestructive Evaluation and Health Monitoring, Int. Soc. Opt. Photon.
Schwerdtfeger, 2011, Design of Auxetic Structures via Mathematical Optimization, Adv. Mater., 23, 2650, 10.1002/adma.201004090
Scott, 2015, Additive Manufacturing in an End-to-End Supply Chain Setting, 3D Print. Addit. Manuf., 2, 65, 10.1089/3dp.2015.0005
Seepersad, 2014, Challenges and Opportunities in Design for Additive Manufacturing, 3D Print. Addit. Manuf., 1, 10, 10.1089/3dp.2013.0006
Setaki, 2014, Acoustic Absorbers by Additive Manufacturing, Build. Environ., 72, 188, 10.1016/j.buildenv.2013.10.010
Shapeways, 2016
Shellabear, 2004, DMLS-Development History and State of the Art. Laser Assisted Netshape Engineering 4, 21
Shemelya, 2015, Encapsulated Copper Wire and Copper Mesh Capacitive Sensing for 3-D Printing Applications, Sens. J. IEEE, 15, 1280, 10.1109/JSEN.2014.2356973
Smith, 2004, Metamaterials and Negative Refractive Index, Science, 305, 788, 10.1126/science.1096796
Sobczak, 2013, Metallic Functionally Graded Materials: A Specific Class of Advanced Composites, J. Mater. Sci. Technol., 29, 297, 10.1016/j.jmst.2013.02.006
Sohlenius, 1992, Concurrent Engineering, CIRP Ann. Manuf. Technol., 41, 10.1016/S0007-8506(07)63251-X
Spierings, 2012, Designing Material Properties Locally with Additive Manufacturing Technology SLM
Stratasys Ltd, 2015
Stratasys Ltd, 2015
Stratasys Ltd, 2015
Stratasys Ltd, 2015
Stratasys Ltd, 2015
Stratasys Ltd, 2015
Stratasys Ltd, 2015
Stratasys Ltd, 2015
Stratasys Ltd, 2015
Stratasys Ltd, 2015
Stratasys Ltd, 2015
Stratasys Ltd, 2015
Stratasys Ltd, 2015
Stratasys Ltd, 2015
Stratasys Ltd, 2015
Stratasys Ltd, 2015
Stratasys Ltd, 2015
Stratasys Ltd, 2015
Stratasys Ltd, 2015
Stratasys Ltd, 2015
Stratasys Ltd, 2015
Suard, 2014, Towards Stiffness Prediction of Cellular Structures Made by Electron Beam Melting (EBM), Powder Metall., 57, 190, 10.1179/1743290114Y.0000000093
Sun, 2015, 3D Food Printing – An Innovative Way of Mass Customization in Food Fabrication, Int. J. Bioprint., 1
Sun, 2013, 3D Printing of Interdigitated Li-Ion Microbattery Architectures, Adv. Mater., 25, 4539, 10.1002/adma.201301036
Suryakumar, 2011, Weld Bead Modeling and Process Optimization in Hybrid Layered Manufacturing, Comput. Aided Des., 43, 331, 10.1016/j.cad.2011.01.006
Swaelens, 1997, Laser Photopolymerisation Models Based on Medical Imaging: A Development Improving the Accuracy of Surgery, 130
Syam, 2011, Rapid Prototyping and Rapid Manufacturing in Medicine and Dentistry, Virt. Phys. Prototyp., 6, 79, 10.1080/17452759.2011.590388
Tapoglou, 2015, Cloud Based Platform for Optimal Machining Parameter Selection Based on Function Blocks and Real Time Monitoring, ASME J. Manuf. Sci. Eng., 137, 4, 10.1115/1.4029806
Teeter, 2015, Do Revision Total Hip Augments Provide Appropriate Modularity?, Can. J. Surg., 58, 54, 10.1503/cjs.005514
Teitelbaum, 2009, Proposed Build Guidelines for Use in Fused Deposition Modeling to Reduce Build Time and Material Volume, ProQuest
Teufelhart, 2012, Optimization of Strut Diameters in Lattice Structures
Teufelhart, 2014, Investigation of the Capability of Flux of Force Oriented Lattice Structures for Lightweight Design, Adv. Mater. Res., 907, 75, 10.4028/www.scientific.net/AMR.907.75
Thomas, 2009
Thomas, 2014, 1176
Thompson, 2016, Process Chain Modeling and Selection in an Additive Manufacturing Context, CIRP J. Manuf. Sci. Technol., 12, 25, 10.1016/j.cirpj.2015.09.005
Thrimurtulu, 2004, Optimum Part Deposition Orientation in Fused Deposition Modeling, Int. J. Mach. Tools Manuf., 44, 585, 10.1016/j.ijmachtools.2003.12.004
Tomlin, 2011, Topology Optimization of an Additive Layer Manufactured (ALM) Aerospace Part
Truscott, 2011, Additive Manufacturing of Soft Tissue Geometries for Reconstruction Purposes
Tuck, 2006, The Pivotal Role of Rapid Manufacturing in the Production of Cost-Effective Customised Products, Int. J. Mass Cust., 1, 360, 10.1504/IJMASSC.2006.008630
Undt, 2000, MRI-Based Stereolithographic Models of the Temporomandibular Joint: Technical Innovation, J. Cranio-Maxillofac. Surg., 28, 258, 10.1054/jcms.2000.0159
Vaezi, 2013, Multiple Material Additive manufacturing – Part 1: A Review, Virtual Phys. Prototyp., 8, 19, 10.1080/17452759.2013.778175
Van Bael, 2011, Micro-CT-Based Improvement of Geometrical and Mechanical Controllability of Selective Laser Melted Ti6Al4V Porous Structures, Mater. Sci. Eng. A, 528, 7423, 10.1016/j.msea.2011.06.045
Vayre, 2013, Identification on Some Design Key Parameters for Additive Manufacturing: Application on Electron Beam Melting, Proc. CIRP, 7, 264, 10.1016/j.procir.2013.05.045
VDI-Guideline 3404, 2009
Vermaak, 2014, Material Interface Effects on the Topology Optimization of Multi-Phase Structures Using a Level Set Method, Struct. Multidiscip. Optim., 50, 623, 10.1007/s00158-014-1074-2
Villarraga, 2015, Dimensional Metrology of Complex Inner Geometries Built by Additive Manufacturing
Voxel8, 2015
Voxeljet, 2012
Voxeljet, 2015
Voxeljet, 2012
Vujovic, 2015, The Introduction of 3D Printing into the Maritime Industry, Trans. Marit. Sci., 4, 86
Wahab, 2011, Rapid Manufacturing of Removable Complete Denture Components
Wang, 2004, “Color” Level Sets: A Multi-Phase Method for Structural Topology Optimization with Multiple Materials, Comput. Methods Appl. Mech. Eng., 193, 469, 10.1016/j.cma.2003.10.008
Wang, 2005, A Hybrid Geometric Modeling Method for Large Scale Conformal Cellular Structures
Watts, 2006, Exploiting the Design Freedom of RM
Wauthle, 2015, Effects of Build Orientation and Heat Treatment on the Microstructure and Mechanical Properties of Selective Laser Melted Ti6Al4V Lattice Structures, Addit. Manuf., 5, 77, 10.1016/j.addma.2014.12.008
Wegrzyn, 2012, Food Layered Manufacture: A New Process for Constructing Solid Foods, Trends Food Sci. Technol., 27, 66, 10.1016/j.tifs.2012.04.006
Whitehouse, 2015, Continued Good Results with Modular Trabecular Metal Augments for Acetabular Defects in Hip Arthroplasty at 7 to 11 Years, Clin. Orthop. Relat. Res., 473, 521, 10.1007/s11999-014-3861-x
Williams, 2015, Wire+Arc Additive Manufacturing, Mater. Sci. Technol.
Withell, 2011, Porous Ceramic Filters through 3D Printing
Wohlers, 2014
Wohlers, 2015
Wohlers, 2014
Wolcott, 2015
Xie, 2013, Tapered Labyrinthine Acoustic Metamaterials for Broadband Impedance Matching, Appl. Phys. Lett., 103, 201906, 10.1063/1.4831770
Xu, 2001, The Design of Conformal Cooling Channels in Injection Molding Tooling, Polym. Eng. Sci., 41, 1265, 10.1002/pen.10827
Yan, 2012, Evaluations of Cellular Lattice Structures Manufactured Using Selective Laser Melting, Int. J. Mach. Tools Manuf., 62, 32, 10.1016/j.ijmachtools.2012.06.002
Yang, 2015, Experimental-Assisted Design Development for an Octahedral Cellular Structure Using Additive Manufacturing, Rapid Prototyp. J., 21, 168, 10.1108/RPJ-12-2014-0178
Yasa, 2011, Manufacturing by Combining Selective Laser Melting and Selective Laser Erosion/Laser Re-Melting, CIRP Ann. Manuf. Technol., 60, 263, 10.1016/j.cirp.2011.03.063
Yasa, 2014, Benchmarking of Different Powder-Bed Metal Fusion Processes for Machine Selection in Additive Manufacturing
Ye, 2006, An Investigation into the Implementation of Virtual Reality Technologies In Support of Conceptual Design, Des. Stud., 27, 77, 10.1016/j.destud.2005.06.002
Zarringhalam, 2007
Zhai, 2012
Zhang, 2013, Generic Build Time Estimation Model for Parts Produced by SLS, 43
Zhang, 2013, Using AM Feature and Multi-Attribute Decision Making to Orientate Part in Additive Manufacturing, 411
Zhang, 2014, An Integrated Decision Making Model for Multi-Attributes Decision Making (MADM) Problems in Additive Manufacturing Process Planning, Rapid Prototyp. J., 20, 377, 10.1108/RPJ-01-2013-0009
Zhang, 2014, Evaluating the Design for Additive Manufacturing: A Process Planning Perspective, Proc. CIRP, 21, 144, 10.1016/j.procir.2014.03.179
Zhang, 2015, Build Orientation Optimization for Multi-part Production in Additive Manufacturing, J. Intell. Manuf.
Zhang, 2016, Feature Based Orientation Optimization for Additive Manufacturing, Rapid Prototyp. J., 22, 10.1108/RPJ-03-2014-0037
Zhang, 2015, Fast Adaptive Modeling Method for Build Time Estimation in Additive Manufacturing, CIRP J. Manuf. Sci. Technol., 10, 49, 10.1016/j.cirpj.2015.05.003