Design and numerical evaluation of recycled-carbon-fiber-reinforced polymer/metal hybrid engine cradle concepts

Bolar, 2015, MMLV: vehicle durability design, simulation and testing, SAE Tech Pap Ser, 1, 10.4271/2015-01-1613 Kastensson, 2014, Developing lightweight concepts in the automotive industry: taking on the environmental challenge with the Sånätt project, J Clean Prod, 66, 337, 10.1016/j.jclepro.2013.11.007 Zhang, 2007, Lightweight design of automotive front side rail based on robust optimisation, Thin-Walled Struct, 45, 670, 10.1016/j.tws.2007.05.007 Joost, 2012, Reducing vehicle weight and improving U.S. energy efficiency using integrated computational materials engineering, Jom, 64, 1032, 10.1007/s11837-012-0424-z Taub, 2015, Advanced lightweight materials and manufacturing processes for automotive applications, MRS Bull, 40, 1045, 10.1557/mrs.2015.268 Taub, 2007, Yesterday, today and tomorrow: the evolution of technology for materials processing over the last 50 years: the automotive example, JOM, 10.1007/s11837-007-0022-7 Lyu, 2015, Research trends in polymer materials for use in lightweight vehicles, Int J Precis Eng Manuf, 16, 213, 10.1007/s12541-015-0029-x Dong, 2015, Polyacrylonitrile/lignin sulfonate blend fiber for low-cost carbon fiber, RSC Adv Baker, 2012, On the characterization and spinning of an organic-purified lignin toward the manufacture of low-cost carbon fiber, J Appl Polym Sci, 10.1002/app.33596 Braun, 2005, Lignin-based carbon fibers: oxidative thermostabilization of kraft lignin, Carbon N Y, 10.1016/j.carbon.2004.09.027 Kadla, 2002, Lignin-based carbon fibers for composite fiber applications, Carbon N Y, 10.1016/S0008-6223(02)00248-8 Holmes, 2018, Recycled carbon fiber composites become a reality, Reinf Plast, 62, 148, 10.1016/j.repl.2017.11.012 Meng, 2017, Environmental aspects of use of recycled carbon fiber composites in automotive applications, Environ Sci Technol, 51, 12727, 10.1021/acs.est.7b04069 Oliveux, 2015, Current status of recycling of fibre reinforced polymers: review of technologies, reuse and resulting properties, Prog Mater Sci, 72, 61, 10.1016/j.pmatsci.2015.01.004 Grujicic, 2018, Injection overmolding of polymer-metal hybrid structures, 277 Carradò, 2011, Metal/polymer/metal hybrid systems: towards potential formability applications, Compos Struct, 10.1016/j.compstruct.2010.07.016 Park, 2013, Development of plastic front side panels for green cars, CIRP J Manuf Sci Technol, 6, 44, 10.1016/j.cirpj.2012.08.002 Wong, 2012, Effect of coupling agents on reinforcing potential of recycled carbon fibre for polypropylene composite, Compos Sci Technol, 10.1016/j.compscitech.2012.02.013 Korson, 2005, An integrated automotive roof module concept: platic-metal hybrid and polyurethane composite technology, 14 Joost, 2017, Towards magnesium alloys for high-volume automotive applications, Scr Mater, 128, 107, 10.1016/j.scriptamat.2016.07.035 Li, 2018, Multi-material topology optimization for automotive design problems Lim, 2016, Reliability-based design optimization of an automotive structure using a variable uncertainty, Proc Inst Mech Eng Part D J Automob Eng, 230, 1314, 10.1177/0954407015606825 Li, 2015, Conceptual and detailed design of an automotive engine cradle by using topology, shape, and size optimization, Struct Multidiscip Optim, 51, 547, 10.1007/s00158-014-1151-6 Doude, 2018, Cast magnesium alloy corvette engine cradle, 337 Belingardi, 2014, Design of a composite engine support sub-frame to achieve lightweight vehicles, Int J Automot Compos, 1, 90, 10.1504/IJAUTOC.2014.064129 Pinch, 2010, Development of the 2006 corvette Z06 structural cast magnesium crossmember, SAE Tech Pap Ser Holmes, 2017, Lowering the cost of carbon fiber, Reinf Plast, 61, 279, 10.1016/j.repl.2017.02.001 Lasdon, 1974, Nonlinear optimization using the generalized reduced gradient method, Rev Française d'automatique, Informatique, Rech Opérationnelle Rech Opérationnelle, 8, 73, 10.1051/ro/197408V300731 Abaqus Version 6.14. User's Manual2014. Yu, 2001, Literature review of automotive vehicle engine mounting systems, Mech Mach Theory, 10.1016/S0094-114X(00)00023-9 Demirci, 2014, Wear behaviors of polytetrafluoroethylene and glass fiber reinforced polyamide 66 journal bearings, Mater Des, 10.1016/j.matdes.2014.01.013 Ünlü, 2009, Tribological properties of polymer-based journal bearings, Mater Des, 10.1016/j.matdes.2008.11.018 Chang, 2006, On the sliding wear of nanoparticle filled polyamide 66 composites, Compos Sci Technol, 10.1016/j.compscitech.2005.02.021