Design and manufacture of hybrid aluminum/composite co-cured tubes with viscoelastic interface layer

Cesari, 2007, Damage and residual strength of laminated carbon–epoxy composite circular plates loaded at the centre, Composites Part A: Applied Science and Manufacturing, 38, 1163, 10.1016/j.compositesa.2006.04.013 Cho, 1998, Manufacturing of co-cured composite aluminum shafts with compression during co-curing operation to reduce residual thermal stresses, Journal of composite materials, 32, 1221, 10.1177/002199839803201205 Han, 2017, Design and fabrication of a metal-composite hybrid pantograph upper arm by co-cure technique with a friction layer, Composite Structures, 174, 166, 10.1016/j.compstruct.2017.04.041 Jeon, 2016, Design of carbon/epoxy–aluminum hybrid upper arm of the pantograph of high-speed trains using adhesive bonding technique, Composite Structures, 152, 538, 10.1016/j.compstruct.2016.05.079 Kim, 2004, Design and manufacture of an automotive hybrid aluminum/composite drive shaft, Composite structures, 63, 87, 10.1016/S0263-8223(03)00136-3 Nikbakt, 2018, A Review on Optimization of Composite Structures Part I: Laminated Composites, Composite Structures, 10.1016/j.compstruct.2018.03.063 Wang, 2016, Bond strength between carbon fiber–reinforced plastic tubes and aluminum joints for racing car suspension, Advances in Mechanical Engineering, 8, 10.1177/1687814016674627