Design and Dynamic Analysis of the Recirculating Planetary Roller Screw Mechanism
Tóm tắt
The recirculating planetary roller screw mechanism (RPRSM) is a transmission mechanism that engages the screw and nut threaded by multiple grooved rollers. In this paper, firstly, the design method of RPRSM nut threadless area is proposed, and the equations related to the structural parameters of nut threadless area are derived. On this basis, the cross-section design method of roller, screw and nut is constructed according to the actual situation of engagements between the screw/nut and the roller. By adjusting the gap between the two beveled edges and that between the arc and the beveled edge, the accuracy of the thread engagements between the screw/nut and the roller can be improved. Secondly, to ensure the engagements of the screw/nut and the roller, the distance equation from the center surface of the different rollers to the end surface of cam ring is given. Thirdly, combined with the working principle and structural composition of RPRSM, the component model is established according to its relevant structural parameters, and the virtual assembly is completed. Finally, the 3D model is imported into the ADAMS simulation software for multi-rigid body dynamics. The dynamic characteristic is analyzed, and the simulated values are compared with the theoretical values. The results show that the contact forces between the screw/nut and the roller are sinusoidal, mainly due to the existence of a small gap between the roller and the carrier. The maximum collision forces between the roller and cam ring are independent from load magnitude. Normally, the collision force between the roller and the carrier increases as the load increases. When RPRSM is in the transmission process, the roller angular speed in nut threadless area begins to appear abruptly, and the position of the maximum change is at the contact between the roller and the convex platform of cam ring. The design of the nut threadless area and the proposed virtual assembly method can provide a theoretical guidance for RPRSM research, as well as a reference for overall performance optimization.
Tài liệu tham khảo
G Qiao, G Liu, Z H Shi, et al. A review of electromechanical actuators for more/all electric aircraft systems. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 2018, 232(22): 4128–4151.
F Lisowski. The specific dynamic capacity of a planetary roller screw with random deviations of a thread pitch. Journal of Theoretical and Applied Mechanics, 2017, 55(3): 991–1001.
Y Q Liu, Y Shang, J S Wang. Mathematical analysis of the meshing performance of planetary roller screws applying different roller thread shapes. Advances in Mechanical Engineering, 2017, 9(5): 1–11.
X J Fu, G Liu, S J Ma, et al. An efficient method for the dynamic analysis of planetary roller screw mechanism. Mechanism and Machine Theory, 2020, 150: 1–15.
A Andrade, D Nicolosi, J Lucchi, et al. Auxiliary total artificial heart: a compact electromechanical artificial heart working simultaneously with the natural heart. Artificial Organs, 1999, 23(9): 876–880.
S A Velinsky, B Chu, T A Lasky. Kinematics and efficiency analysis of the planetary roller screw mechanism. Journal of Mechanical Design, 2009, 131(1): 1–8.
J-C Maré, J Fu. Review on signal-by-wire and power-by-wire actuation for more electric aircraft. Chinese Journal of Aeronautics, 2017, 30(3): 857–870.
J Meng, X Du, Y Li, et al. A multiscale accuracy degradation prediction method of planetary roller screw mechanism based on fractal theory considering thread surface roughness. Fractal and Fractional, 2021, 5(4): 1–20.
L Zu, Z Zhang, L Gao. Design and bearing characteristics of planetary roller screws based on aerospace high-load conditions. Advances in Mechanical Engineering, 2018, 10: 1–11.
Y Liu, J Wang, H Cheng, et al. Kinematics analysis of the roller screw based on the accuracy of meshing point calculation. Mathematical Problems in Engineering, 2015: 1–10.
X Li, G Liu, X J Fu, et al. Lagrange-method-based dynamic analysis of multi-stage planetary roller screw mechanism. Mechanical Sciences, 2021, 12(1): 471–478.
S Sandu, N Biboulet, D Nelias, et al. Analytical prediction of the geometry of contact ellipses and kinematics in a roller screw versus experimental results. Mechanism and Machine Theory, 2019, 131: 115–136.
G Qiao, G Liu, S J Ma, et al. Thermal characteristics analysis and experimental study of the planetary roller screw mechanism. Applied Thermal Engineering, 2019, 149: 1345–1358.
W J Zhang, G Liu, S J Ma, et al. Load distribution over threads of planetary roller screw mechanism with pitch deviation. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2019, 233(13): 4653–4666.
W J Zhang, G Liu, R T Tong, et al. Load distribution of planetary roller screw mechanism and its improvement approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2016, 230(18): 3304–3318.
S J Ma, G Liu, R T Tong, et al. A new study on the parameter relationships of planetary roller screws. Mathematical Problems in Engineering, 2012: 1–29.
F Lisowski, J Ryś. A methodology of designing the teeth conjugation in a planetary roller screw. Archive of Mechanical Engineering, 2016, 63(4): 589–603.
F Lisowski. Optimization of thread root undercut in the planetary roller screw. Czasopismo Techniczne, 2017(9): 219–227.
C-K Shih, C Hung, R-Q Hsu. The finite element analysis on planetary rolling process. Journal of Materials Processing Technology, 2001, 113(1): 115–123.
S J Ma, G Liu, J X Zhou, et al. Optimal design and contact analysis for planetary roller screw. Applied Mechanics and Materials, 2011, 86: 361–364.
F Abevi, A Daidie, M Chaussumier, et al. Static load distribution and axial stiffness in a planetary roller screw mechanism. Journal of Mechanical Design, 2016, 138(1): 1–11.
X J Fu, G Liu, X Li, et al. Dynamic modeling of the double-nut planetary roller screw mechanism considering elastic deformations. Journal of Computational and Nonlinear Dynamics, 2021, 16(5): 1–13.
X J Fu, G Liu, S J Ma, et al. Kinematic model of planetary roller screw mechanism with run-out and position errors. Journal of Mechanical Design, 2018, 140(3): 1–10.
S J Ma, T Zhang, G Liu, et al. Kinematics of planetary roller screw mechanism considering helical directions of screw and roller threads. Mathematical Problems in Engineering, 2015: 1–11.
G Qiao, G Liu, S J Ma, et al. Dynamic characteristic analysis for an electro-mechanical actuator based on planetary roller screw mechanism. Journal of Vibration and Shock, 2016, 35(7): 82–88, 101. (in Chinese)
M H Jones, S A Velinsky. Kinematics of roller migration in the planetary roller screw mechanism. Journal of Mechanical Design, 2012, 134(6): 1–6.
Y Hojjat, M M Agheli. A comprehensive study on capabilities and limitations of roller-screw with emphasis on slip tendency. Mechanism and Machine Theory, 2009, 44(10): 1887–1899.
S J Ma, T Zhang, G Liu, et al. Bond graph-based dynamic model of planetary roller screw mechanism with consideration of axial clearance and friction. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2018, 232(16): 2899–2911.
C F Zou, H J Zhang, J Zhang, et al. Acceleration-dependent analysis of vertical ball screw feed system without counterweight. Chinese Journal of Mechanical Engineering, 2021, 34(1): 1–13.
ROLLVIS SWISS. Satellite roller screws catalogue 2019. Switzerland, ROLLVIS SA, 2019[2022-05-02]. https://rollvis.com/wpcontent/uploads/2021/09/Catalogue-EN-2018-compressed.pdf.