Design, analysis, and comparative study of a latent heat thermal energy storage system with parallel constructal fins

O. E. Atear, Storage of Thermal Energy. Encyclopedia of Life Support Systems (EOLSS). 2008. Regin, 2008, Heat transfer characteristics of thermal energy storage system using PCM capsules: a review, Renew. Sustain. Energy Rev., 12, 2438, 10.1016/j.rser.2007.06.009 Lacroix, 1993, Study of the heat transfer behavior of a latent heat thermal energy storage unit with a finned tube, Int. J. Heat Mass Transf., 36, 2083, 10.1016/S0017-9310(05)80139-5 Erek, 2005, Experimental and numerical investigation of thermal energy storage with a finned tube, Int. J. Energy Res., 29, 283, 10.1002/er.1057 Talati, 2011, Analytical approximation for solidification processes in PCM storage with internal fins: imposed heat flux, Heat Mass Trans., 47, 369, 10.1007/s00231-010-0729-9 Yang, 2013, Numerical analysis on the thermal behavior of high temperature latent heat thermal energy storage system, Sol. Energy, 98, 543, 10.1016/j.solener.2013.10.028 Gil, 2013, Experimental analysis of the effectiveness of a high temperature thermal storage tank for solar cooling applications, Appl. Therm. Eng., 54, 521, 10.1016/j.applthermaleng.2013.02.016 Hosseinizadeh, 2013, Experimental and numerical studies on performance of PCM-based heat sink with different configurations of internal fins, Appl. Therm. Eng., 31, 3827 Urschitz, 2014, Experimental investigation of a finned mono tube—Latent heat thermal energy storage (LHTES) Sarviya, 2016, Enhancement of Thermal Performance of Latent Heat Solar Storage System, Int. J. Chem., Mol., Nucl., Mater. Metal. Eng., 10, 725 Rozenfeld, 2015, Close-contact melting in a horizontal cylindrical enclosure with longitudinal plate fins: Demonstration, modeling and application to thermal storage, Int. J. Heat Mass Transf., 86, 465, 10.1016/j.ijheatmasstransfer.2015.02.064 Jmal, 2015, Numerical study of PCM solidification in a finned tube thermal storage including natural convection, Appl. Therm. Eng., 84, 320, 10.1016/j.applthermaleng.2015.03.065 Ogoh, 2012, Effects of the number and distribution of fins on the storage characteristics of a cylindrical latent heat energy storage system: a numerical study, Heat Mass Transf., 48, 1825, 10.1007/s00231-012-1029-3 Yuan, 2016, Effect of installation angle of fins on melting characteristics of annular unit for latent heat thermal energy storage, Sol. Energy, 136, 365, 10.1016/j.solener.2016.07.014 Ismail, 2001, Numerical and experimental study on the solidification of PCM around a vertical axially finned isothermal cylinder, Appl. Therm. Eng., 21, 53, 10.1016/S1359-4311(00)00002-8 Ji, 2018, Non-uniform heat transfer suppression to enhance PCM melting by angled fins, Appl. Therm. Eng., 129, 269, 10.1016/j.applthermaleng.2017.10.030 Hassan, 2020, Experimental evaluation of thermal performance of two different finned latent heat storage systems, Case Stud. Therm. Eng., 21, 10.1016/j.csite.2020.100675 Kozak, 2014, Close-contact melting in vertical annular enclosures with a non-isothermal base: Theoretical modeling and application to thermal storage, Int. J. Heat Mass Transf., 72, 114, 10.1016/j.ijheatmasstransfer.2013.12.058 Lohrasbi, 2016, Discharging process expedition of NEPCM in fin-assisted latent heat thermal energy storage system, J. Mol. Liq., 221, 833, 10.1016/j.molliq.2016.06.044 Sciacovelli, 2015, Maximization of performance of a PCM latent heat storage system with innovative fins, Appl. Energy, 137, 707, 10.1016/j.apenergy.2014.07.015 Lohrasbi, 2016, Response surface method optimization of V-shaped fin assisted latent heat thermal energy storage system during discharging process, Alex. Eng. J., 55, 2065, 10.1016/j.aej.2016.07.004 Sheikholeslami, 2019, Heat transfer behavior of nanoparticle enhanced PCM solidification through an enclosure with V shaped fins, Int. J.Heat Mass Transf, 130, 1322, 10.1016/j.ijheatmasstransfer.2018.11.020 Sheikholeslami, 2016, Numerical analysis of discharging process acceleration in LHTESS by immersing innovative fin configuration using finite element method, Appl. Therm. Eng., 107, 154, 10.1016/j.applthermaleng.2016.06.158 Mahdi, 2019, Hybrid heat transfer enhancement for latent-heat thermal energy storage systems: A review, Int. J. Heat Mass Transf., 137, 630, 10.1016/j.ijheatmasstransfer.2019.03.111 Lu, 2021, Experimental investigation on thermal behavior of paraffin in a vertical shell and spiral fin tube latent heat thermal energy storage unit, Appl. Therm. Eng., 187, 116575, 10.1016/j.applthermaleng.2021.116575 Mehta, 2020, Thermal performance augmentation in latent heat storage unit using spiral fin: An experimental analysis, J. Energy Storage, 31, 10.1016/j.est.2020.101776 Abdulateef, 2018, Experimental and numerical study of solidifying phase-change material in a triplex-tube heat exchanger with longitudinal/triangular fins, Int. Commun. Heat Mass Transfer, 90, 73, 10.1016/j.icheatmasstransfer.2017.10.003 You, 2019, Constructal design of nonuniform heat generating area based on triangular elements: A case of entropy generation minimization, Int. J. Therm. Sci., 139, 403, 10.1016/j.ijthermalsci.2019.02.020 Wu, 2020, Numerical analysis and improvement of the thermal performance in a latent heat thermal energy storage device with spiderweb-like fins, J. Energy Storage, 32, 10.1016/j.est.2020.101768 Karami, 2020, Experimental investigation of the effect of perforated fins on thermal performance enhancement of vertical shell and tube latent heat energy storage systems, Energy Convers. Manage., 210, 10.1016/j.enconman.2020.112679 Eslami, 2021, Effects of fin parameters on performance of latent heat thermal energy storage systems: A comprehensive review, Sustainable Energy Technol. Assess., 47 Bejan, 2006 Bejan, 2000 Rocha, 2012 Feng, 2017, Multi-disciplinary, multi-objective and multi-scale constructal optimizations for heat and mass transfer processes performed in Naval University of Engineering, a review, Int. J. Heat Mass Transf., 115, 86, 10.1016/j.ijheatmasstransfer.2017.08.011 Chen, 2019, Progress of constructal theory in China over the past decade, Int. J. Heat Mass Transf., 130, 393, 10.1016/j.ijheatmasstransfer.2018.10.064 Eslami, 2012, Thermal resistance in conductive constructal designs of arbitrary configuration: A new general approach, Energy Convers. Manage., 57, 117, 10.1016/j.enconman.2011.12.010 Eslami, 2012, Optimal distribution of imperfection in conductive constructal designs of arbitrary configurations, J. Appl. Phys., 112, 10.1063/1.4766443 Eslami, 2014, Thermal resistance approach: an engineering tool for improvement of conductive constructal configurations, J. Heat Transfer, 136, 10.1115/1.4027459 Eslami, 2017, Sensible and latent thermal energy storage with constructal fins, Int. J. Hydrogen Energy, 42, 17681, 10.1016/j.ijhydene.2017.04.097 Eslami, 2016, Optimal conductive constructal configurations with ‘parallel design’, Energy Convers. Manag., 111, 352, 10.1016/j.enconman.2015.12.078 Hosseini, 2015, Experimental and numerical evaluation of longitudinally finned latent heat thermal storage systems, Energ. Build., 99, 263, 10.1016/j.enbuild.2015.04.045 Wang, 2016, Numerical investigation of PCM melting process in sleeve tube with internal fins, Energy Convers. Manage., 110, 428, 10.1016/j.enconman.2015.12.042 Al-Abidi, 2013, Internal and external fin heat transfer enhancement technique for latent heat thermal energy storage in triplex tube heat exchangers, Appl. Therm. Eng., 53, 147, 10.1016/j.applthermaleng.2013.01.011 Voller, 1987, An enthalpy method for convection/diffusion phase change, Int. J. Numer. Meth. Eng., 24, 271, 10.1002/nme.1620240119 Al-Abidi, 2013, CFD applications for latent heat thermal energy storage: A review, Renew. Sustain. Energy Rev., 20, 353, 10.1016/j.rser.2012.11.079 Al-Abidi, 2013, Numerical study of PCM solidification in a triplex tube heat exchanger with internal and external fins, Int. J. Heat Mass Transf., 61, 684, 10.1016/j.ijheatmasstransfer.2013.02.030