Design algorithm of rational fiber trajectories in arbitrarily loaded composite plate

Heller, M., Kaye, R., and Rose, L.R.F., A gradientless finite element procedure for shape optimization, J. Strain Anal. Eng. Design, 1999, vol. 34, no. 5, pp. 323–336.

Muc, A., Effectiveness of optimal design with respect to computational models for laminated composite structures weakened by holes, Struct. Optimiz., 1998, vol. 16, no. 1, pp. 58–67.

Hyer, M.W. and Charette, R.F., The use of curvilinear fiber format in composite structure design, AIAA J., 1991, vol. 29, no. 6, pp. 1011–1015.

Tosh, M.W. and Kelly, D.W., On the design, manufacture and testing of trajectorial fiber steering for carbon fiber composite laminates, Composites Part A: Appl. Sci. Manuf., 2000, vol. 31, no. 10, pp. 1047–1060.

Lemaire, E., Zein, S., and Bruyneel, M., Optimization of composite structures with curved fiber trajectories, Composite Struct., 2015, vol. 131, no. 5, pp. 895–904.

Cho, H. and Rowlands, R., Optimizing fiber direction in perforated orthotropic media to reduce stress concentration, J. Composite Mater., 2009, vol. 43, no. 10, pp. 1177–1198.

Huang, J. and Haftka, R.T., Optimization of fiber orientations near a hole for increased load-carrying capacity of composite laminates, Struct. Multidiscipl. Optimiz., 2005, vol. 30, no. 5, pp. 335–341.

Pedersen, P., Examples of density, orientation, and shape-optimal 2D-design for stiffness and/or strength with orthotropic materials, Struct. Multidiscipl. Optimiz., 2004, vol. 26, no. 1, pp. 37–49.

Hyer, M.W. and Lee, H.H., The use of curvilinear fiber format to improve buckling resistance of composite plates with central circular holes, Composite Struct., 1991, vol. 18, no. 3, pp. 239–261.

Mattheck, C., Design in Nature: Learning from Trees, Springer, 1998.

Spickenheuer, A., Schulz, M., Gliesche, K., and Heinrich, G., Using tailored fiber placement technology for stress adapted design of composite structures, Plastics, Rubber Composit.–Macromolec. Eng., 2008, vol. 37, no. 5, pp. 227–232.

Dell’Anno, G., Partridge, I., Cartié, D., Hamlyn, A., Chehura, E., James, S.W., and Tatam, R.P., Automated manufacture of 3D reinforced aerospace composite structures, Int. J. Struct. Integrity, 2010, vol. 3, no. 1, pp. 22–40.

Matsuzaki, R., Ueda, M., Namiki, M., Jeong, T.-K., Asahara, H., Horiguchi, K., Nakamura, T., Todoroki, A., and Hirano, Y., Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation, Sci. Rep., 2016, vol. 6, p. 23058.

Malakhov, A.V. and Polilov, A.N., Construction of trajectories of the fibers which bypass a hole and their comparison with the structure of wood in the vicinity of a knot, J. Mach. Manuf. Reliab., 2013, vol. 42, no. 4, p. 306.

Malakhov, A.V. and Polilov, A.N., Design of composite structures reinforced curvilinear fibers using FEM, Composit. Part A: Appl. Sci. Manuf., 2016, vol. 87, pp. 23–28.

Malakhov, A.V. and Polilov, A.N., Design of joints of composite members with curvilinear reinforcement structure, Proc. 16th Europ. Conf. on Composite Materials ECCM 2014, Seville, June 22–26, 2014.

Polilov, A.N., Tatus’, N.A., and Plitov, I.S., Estimating the effect of misorientation of fibers on stiffness and strength of profiled composite elements, J. Mach. Manuf. Reliab., 2013, vol. 42, no. 5, p. 390.

Polilov, A.N. and Tatus’, N.A., Strength criteria for polymeric fiber composites which describe some experimentally observed effects, Probl. Mashinostr. Avtomatiz., 2008, no. 3, pp. 103–110.

Polilov, A.N., Eksperimental’naya mekhanika kompozitov (Experimental Composite Mechanics), Moscow: N.E. Bauman Moscow State Techn. Univ., 2015.

Polilov, A.N., Etyudy po mekhanike kompozitov (Etudes on Composite Mechanics), Moscow: Fizmatlit, 2015.

Jasso, A.M., Goodsell, J.E., Ritchey, A.J., Pipes, R.B., and Koslowski, M., A parametric study of fiber volume fraction distribution on the failure initiation location in open hole off-axis tensile specimen, Composit. Sci. Technol., 2011, vol. 71, no. 16, pp. 1819–1825.