Design Strength of Locally Buckling Stub-Lipped Channel Columns

ABAQUS . (2007). ABAQUS standard user’s manual Version 6.7 Dassault Systèmes Simulia Providence RI.

American Iron and Steel Institute (AISI). (2007). “North American specification for the design of cold-formed steel structural members.” AISI S100–2007 Washington DC.

British Standards Institute. (1987). “Structural use of steelwork in building. Code of practice for design of cold formed thin gauge sections ” BS 5950-5 London.

European Committee for Standardization (CEN). (2004). “Design of steel structures part 1.3: Supplementary rules for cold-formed members and sheeting.” ENV 1993-1-3 Eurocode 3 Brussels Belgium.

Kumar M. V. A. (2012). “Interaction of local distortional and overall buckling in cold formed steel lipped channel compression members.” Ph.D. thesis Indian Institute of Technology Madras Chennai India.

Kwon, Y. B., Kim, N. K., and Kim, B. S. (2005). “A study on the direct strength method for compression members undergoing mixed mode buckling.” Proc., Steel Structures ISSS'05, Korean Society of Steel Construction, Seoul, Korea, 108–119.

Lim B. S. (1985). “Buckling behaviour of asymmetric edge stiffened plates.” Ph.D. thesis Univ. of Strthclyde Glasgow U.K.

Schafer B. W. and Adany S. (2006). “Buckling analysis of cold-formed steel members using CUFSM: conventional and constrained finite strip methods.” Proc. 18th Int. Specialty Conf. on Cold-Formed Steel Structures Orlando FL 39–54.

Schafer B. W. and Peköz T.(1998b). “Direct strength prediction of cold formed steel members using numerical elastic buckling solutions.” Proc. 14th Int. Specialty Conf. on Cold-Formed Steel Structures Univ. of Missouri-Rolla St. Louis 69–76.

Silvestre B. W. Dinis P. B. and Camotin D. (2006). “Direct strength method for lipped channel columns and beams affected by local-plate/distortional interaction.” Proc. 18th Int. Specialty Conf. on Cold-Formed Steel Structures Orlando FL 1–18.

Standards Australia. (2005). “Cold-formed steel structures.” AS/NZS4600:2005 Standards Australia/Standards New Zealand Sydney NSW Australia.

Talja A. (1990). “Design of the buckling resistance of compressed HSS channels.” Research Note No. 1163 Technical Research Centre of Finland Vuorimiehentie Espoo Finland.

Weng C. C. and Peköz T.(1988). “Compression tests of cold-formed steel columns.” Proc. 9th Int. Specialty Conf. on Cold-Formed Steel Structures St. Louis MO 1–20.

Zaras, J., and Rhodes, J. (1987). “Carefully controlled compression tests on thin-walled cold formed sections.” Applied solid mechanics, A. S. Tooth and J. Spence, eds., Vol. 2, Elsevier, New York, 519–551.