Deposition characteristics of titanium coating deposited on SiC fiber by cold-wall chemical vapor deposition

Sun, 2008, Innovative fabrication of porous titanium coating on titanium by cold spraying and vacuum sintering, Mater. Lett., 62, 3623, 10.1016/j.matlet.2008.04.011 Majzoobi, 2009, Modification of fretting fatigue behavior of AL7075–t6 alloy by the application of titanium coating using IBED technique and shot peening, Tribol. Int., 42, 121, 10.1016/j.triboint.2008.05.006 Bemporad, 2006, High thickness Ti/TiN multilayer thin coatings for wear resistant applications, Surf. Coat. Technol., 201, 2155, 10.1016/j.surfcoat.2006.03.042 Dück, 2001, Ti/TiN multilayer coatings: deposition technique, characterization and mechanical properties, Surf. Coat. Technol., 142–144, 579, 10.1016/S0257-8972(01)01171-9 Chang, 2007, Effects of titanium-implanted pre-treatments on the residual stress of TiN coatings on high-speed steel substrates, Surf. Coat. Technol., 201, 6702, 10.1016/j.surfcoat.2006.09.035 Cubillos, 2005, Study of TiN and Ti/TiN coatings produced by pulsed-arc discharge, Surf. Coat. Technol., 190, 83, 10.1016/j.surfcoat.2004.07.082 Kottfer, 2013, Investigation of Ti and Cr based PVD coatings deposited onto HSS Co 5 twist drills, Appl. Surf. Sci., 282, 770, 10.1016/j.apsusc.2013.06.051 Sobue, 1997, Dependence of diffusion barrier properties in microstructure of reactively sputtered TiN films in Al alloy/TiN/Ti/Si system, Appl. Surf. Sci., 117–118, 308, 10.1016/S0169-4332(97)80099-2 Subramanian, 2011, Influence of substrate temperature on the materials properties of reactive DC magnetron sputtered Ti/TiN multilayered thin films, Mater. Sci. Eng. B, 176, 1, 10.1016/j.mseb.2010.08.004 Zhang, 2009, Effect of TiN/Ti multilayer on fretting fatigue resistance of Ti-811 alloy at elevated temperature, Trans. Nonferrous Met. Soc. China, 19, 557, 10.1016/S1003-6326(08)60312-X Caicedo, 2010, Hard coating performance enhancement by using [Ti/TiN]n, [Zr/ZrN]n and [TiN/ZrN]n multilayer system, Mater. Sci. Eng. B, 171, 56, 10.1016/j.mseb.2010.03.069 Saoula, 2010, Study of the deposition of Ti/TiN multilayers by magnetron sputtering, Surf. Interface Anal., 42, 1176, 10.1002/sia.3299 Liu, 2010, Improving mechanical properties of a-CNx films by Ti-TiN/CNx gradient multilayer, Appl. Surf. Sci., 257, 487, 10.1016/j.apsusc.2010.07.018 Liu, 2007, Effects of Ti/TiN multilayer on corrosion resistance of nickel-titanium orthodontic brackets in artificial saliva, Corros. Sci., 49, 3783, 10.1016/j.corsci.2007.03.041 Zhao, 2011, Ti/TiN multilayer thin films deposited by pulse biased arc ion plating, Appl. Surf. Sci., 257, 2683, 10.1016/j.apsusc.2010.10.042 Liu, 2012, Fatigue life of Ti/TiN/DLC multilayer films fabricated on bearing steel by PIIID, Vacuum, 86, 848, 10.1016/j.vacuum.2011.02.015 Major, 2006, Crystallographic aspects related to advanced tribological multilayers of Cr/CrN and Ti/TiN types produced by pulsed laser deposition (PLD), Surf. Coat. Technol., 200, 6190, 10.1016/j.surfcoat.2005.11.021 Li, 2003, Deposition characteristics of titanium coating in cold spraying, Surf. Coat. Technol., 167, 278, 10.1016/S0257-8972(02)00919-2 Bull, 1991, The influence of titanium interlayers on the adhesion of titanium nitride coatings obtained by plasma-assisted chemical vapor deposition, Mater. Sci. Eng. A, 139, 71, 10.1016/0921-5093(91)90599-I Hu, 1998, Characterization of multilayered Ti/TiN films grown by chemical vapor deposition, Thin Solid Films, 332, 423, 10.1016/S0040-6090(98)01018-9 Jin, 2013, Development of CVD Ti-containing films, Prog. Mater. Sci., 58, 1490, 10.1016/j.pmatsci.2013.07.001 Gussone, 2011, Deposition of titanium on SiC fibres from chloride melts, J. Appl. Electrochem., 41, 657, 10.1007/s10800-011-0284-1 Kodas, 1994, 4 Tan, 1991, Spectroscopic characterization of CVD Ti coating on SiC-coated boron fibers, Chem. Mater., 3, 368, 10.1021/cm00014a030 Sang, 2014, Preparation of titanium coating on alumina foam by chemical vapor deposition, Mater. Sci. Forum, 804, 195, 10.4028/www.scientific.net/MSF.804.195 Hedaiatmofidi, 2014, Deposition of titanium layer on steel substrate using PECVD method: a parametric study, Mater. Sci. Appl., 5, 140 Chou, 1989, Laser chemical vapor deposition of Ti from TiBr4, J. Appl. Phys., 66, 191, 10.1063/1.343903 Pierson, 1992, 36 Tianjin Chemical Industry Research Institute, 1996, 341 Shatwell, 2001, Microstructural analysis of silicon carbide monofilaments, J. Microsc., 201, 179, 10.1046/j.1365-2818.2001.00836.x Luo, 2015, Microstructure, tensile strength and thermostability of W-core SiC fibers with or without carbon coating, Mater. Sci. Eng. A, 647, 265, 10.1016/j.msea.2015.09.019 Fashandi, 2015, Single-step synthesis process of Ti3SiC2 ohmic contacts on 4H-SiC by sputter-deposition of Ti, Scr. Mater., 99, 53, 10.1016/j.scriptamat.2014.11.025 Vishnyakov, 2013, Ti3SiC2-formation during Ti-C-Si multilayer deposition by magnetron sputtering at 650 °C, Vacuum, 93, 56, 10.1016/j.vacuum.2013.01.003 Meng, 1984, 68 Zhang, 2001, The roles of argon addition in thes hot filament chemical vapor deposition system, Diam. Relat. Mater., 10, 1523, 10.1016/S0925-9635(01)00383-1 Zhang, 2010, Effect of flow rate argon gas on growth of CVD TaC coatings and surface morphology, Mater. Sci. Eng. Powder Metall., 05, 484