Delayed deformation-induced martensite transformation and enhanced cryogenic tensile properties in laser additive manufactured 316L austenitic stainless steel

Lee, 2017, Fundamentals and applications of 3D printing for novel materials, Appl. Mater. Today, 7, 120, 10.1016/j.apmt.2017.02.004 DebRoy, 2019, Scientific, technological and economic issues in metal printing and their solutions, Nat. Mater., 18, 1026, 10.1038/s41563-019-0408-2 Stautner, 2017, The scope of additive manufacturing in cryogenics, component design, and applications, IOP Conf. Ser. Mater. Sci. Eng., 278, 10.1088/1757-899X/278/1/012134 Atzeni, 2012, Economics of additive manufacturing for end-usable metal parts, Int. J. Adv. Manuf. Technol., 62, 1147, 10.1007/s00170-011-3878-1 Sames, 2016, The metallurgy and processing science of metal additive manufacturing, Int. Mater. Rev., 61, 315, 10.1080/09506608.2015.1116649 Zafar, 2019, 4D printing: future insight in additive manufacturing, Met. Mater. Int., 26, 564, 10.1007/s12540-019-00441-w Karthik, 2021, Heterogeneous aspects of additive manufactured metallic parts: a review, Met. Mater. Int., 27, 1, 10.1007/s12540-020-00931-2 Larbalestier, 1973, Austenitic stainless steels at cryogenic temperatures 1—structural stability and magnetic properties, Cryogenics, 13, 160, 10.1016/0011-2275(73)90285-3 Skoczeń, 2004, 65 Kim, 2021, Effects of cell network structure on the strength of additively manufactured stainless steels, Met. Mater. Int. Sun, 2019, Excellent mechanical and corrosion properties of austenitic stainless steel with a unique crystallographic lamellar microstructure via selective laser melting, Scr. Mater., 159, 89, 10.1016/j.scriptamat.2018.09.017 Sun, 2018, Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting, NPG Asia Mater., 10, 127, 10.1038/s41427-018-0018-5 Majumdar, 2005, Microstructure characterisation and process optimization of laser assisted rapid fabrication of 316L stainless steel, Appl. Surf. Sci., 247, 320, 10.1016/j.apsusc.2005.01.039 Shifeng, 2014, Effect of molten pool boundaries on the mechanical properties of selective laser melting parts, J. Mater. Process. Technol., 214, 2660, 10.1016/j.jmatprotec.2014.06.002 DebRoy, 2018, Additive manufacturing of metallic components - process, structure and properties, Prog. Mater. Sci., 92, 112, 10.1016/j.pmatsci.2017.10.001 Bahl, 2019, Non-equilibrium microstructure, crystallographic texture and morphological texture synergistically result in unusual mechanical properties of 3D printed 316L stainless steel, Addit. Manuf., 28, 65 Wang, 2018, Additively manufactured hierarchical stainless steels with high strength and ductility, Nat. Mater., 17, 63, 10.1038/nmat5021 Afkhami, 2019, Fatigue characteristics of steels manufactured by selective laser melting, Int. J. Fatigue, 122, 72, 10.1016/j.ijfatigue.2018.12.029 Kong, 2020, The passivity of selective laser melted 316L stainless steel, Appl. Surf. Sci., 504, 10.1016/j.apsusc.2019.144495 Choi, 2012, Effects of nitrogen content on TRIP of Fe–20Cr–5Mn–xN duplex stainless steel, Mater. Sci. Eng. A, 534, 673, 10.1016/j.msea.2011.12.025 Praveen, 2018, Annealing-induced hardening in high-pressure torsion processed CoCrNi medium entropy alloy, Mater. Sci. Eng. A, 734, 338, 10.1016/j.msea.2018.07.107 Laleh, 2021, A critical insight into lack-of-fusion pore structures in additively manufactured stainless steel, Addit. Manuf., 38 Johnson, 2019, Assessing printability maps in additive manufacturing of metal alloys, Acta Mater., 176, 199, 10.1016/j.actamat.2019.07.005 Wei, 2016, Origin of grain orientation during solidification of an aluminum alloy, Acta Mater., 115, 123, 10.1016/j.actamat.2016.05.057 Terrassa, 2019, Improving build quality in directed energy deposition by cross-hatching, Mater. Sci. Eng. A, 765, 10.1016/j.msea.2019.138269 Thijs, 2013, Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum, Acta Mater., 61, 4657, 10.1016/j.actamat.2013.04.036 Zhong, 2016, Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting, J. Nucl. Mater., 470, 170, 10.1016/j.jnucmat.2015.12.034 Saeidi, 2015, Hardened austenite steel with columnar sub-grain structure formed by laser melting, Mater. Sci. Eng. A, 625, 221, 10.1016/j.msea.2014.12.018 Jeon, 2019, Effects of microstructure and internal defects on mechanical anisotropy and asymmetry of selective laser-melted 316L austenitic stainless steel, Mater. Sci. Eng. A, 763, 10.1016/j.msea.2019.138152 Zhou, 2015, Textures formed in a CoCrMo alloy by selective laser melting, J. Alloy. Compd., 631, 153, 10.1016/j.jallcom.2015.01.096 Marattukalam, 2020, The effect of laser scanning strategies on texture, mechanical properties, and site-specific grain orientation in selective laser melted 316L SS, Mater. Des., 193, 10.1016/j.matdes.2020.108852 Prashanth, 2017, Formation of metastable cellular microstructures in selective laser melted alloys, J. Alloy. Compd., 707, 27, 10.1016/j.jallcom.2016.12.209 Birnbaum, 2019, Intrinsic strain aging, Σ3 boundaries, and origins of cellular substructure in additively manufactured 316L, Addit. Manuf., 29 Wang, 2020, The origin of high-density dislocations in additively manufactured metals, Mater. Res. Lett., 8, 283, 10.1080/21663831.2020.1751739 Kong, 2021, About metastable cellular structure in additively manufactured austenitic stainless steels, Addit. Manuf., 38 Bertsch, 2020, Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L, Acta Mater., 199, 19, 10.1016/j.actamat.2020.07.063 Smith, 2019, Strengthening mechanisms in directed energy deposited austenitic stainless steel, Acta Mater., 164, 728, 10.1016/j.actamat.2018.11.021 Pauzon, 2019, Effect of argon and nitrogen atmospheres on the properties of stainless steel 316 L parts produced by laser-powder bed fusion, Mater. Des., 179, 10.1016/j.matdes.2019.107873 David, 1987 Mukherjee, 2019, Effect of build geometry and orientation on microstructure and properties of additively manufactured 316L stainless steel by laser metal deposition, Materialia, 7, 10.1016/j.mtla.2019.100359 Park, 2020, Synergetic strengthening of additively manufactured (CoCrFeMnNi)99C1 high-entropy alloy by heterogeneous anisotropic microstructure, Addit. Manuf., 35 Saboori, 2020, Microstructure and mechanical properties of AISI 316L produced by directed energy deposition-based additive manufacturing: a review, Appl. Sci., 10, 3310, 10.3390/app10093310 Wang, 2016, Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing, Acta Mater., 110, 226, 10.1016/j.actamat.2016.03.019 Zhu, 2018, Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting, Scr. Mater., 154, 20, 10.1016/j.scriptamat.2018.05.015 Wu, 2016, Microstructure and strength of selectively laser melted AlSi10Mg, Acta Mater., 117, 311, 10.1016/j.actamat.2016.07.012 Kong, 2020, Hetero-deformation-induced stress in additively manufactured 316L stainless steel, Mater. Res. Lett., 8, 390, 10.1080/21663831.2020.1775149 Sun, 2018, Transition of twinning behavior in CoCrFeMnNi high entropy alloy with grain refinement, Mater. Sci. Eng. A, 712, 603, 10.1016/j.msea.2017.12.022 Karthik, 2021, Architectured multi-metal CoCrFeMnNi-Inconel 718 lamellar composite by high-pressure torsion, Scr. Mater., 195, 10.1016/j.scriptamat.2021.113722 Duan, 2013, Twinning behaviour of TWIP steel studied by Taylor factor analysis, Philos. Mag. Lett., 93, 316, 10.1080/09500839.2013.776185 De Cooman, 2018, Twinning-induced plasticity (TWIP) steels, Acta Mater., 142, 283, 10.1016/j.actamat.2017.06.046 Yoo, 2017, Effect of stacking faults on the ductility of Fe-18Mn-1.5Al-0.6C twinning-induced plasticity steel at low temperatures, Scr. Mater., 137, 18, 10.1016/j.scriptamat.2017.04.037 AlMangour, 2017, Scanning strategies for texture and anisotropy tailoring during selective laser melting of TiC/316L stainless steel nanocomposites, J. Alloy. Compd., 728, 424, 10.1016/j.jallcom.2017.08.022 Martin, 2016, Deformation mechanisms in austenitic TRIP/TWIP steel as a function of temperature, Metall. Mater. Trans. A, 47, 49, 10.1007/s11661-014-2684-4 Olson, 1972, A mechanism for the strain-induced nucleation of martensitic transformations, J. Less Common Met., 28, 107, 10.1016/0022-5088(72)90173-7 Tsuzaki, 1991, Effect of prior deformation of austenite on the γ→ε martensitic transformation in Fe-Mn alloys, Mater. Trans. JIM, 32, 222, 10.2320/matertrans1989.32.222 Martin, 2013, Microstructure changes in TRIP steel/M g‐PSZ composites induced by low compressive deformation, Adv. Eng. Mater., 15, 600, 10.1002/adem.201200330 Su, 2019, Deformation-driven bidirectional transformation promotes bulk nanostructure formation in a metastable interstitial high entropy alloy, Acta Mater., 167, 23, 10.1016/j.actamat.2019.01.030 Sathiyamoorthi, 2021, Unusual strain-induced martensite and absence of conventional grain refinement in twinning induced plasticity high-entropy alloy processed by high-pressure torsion, Mater. Sci. Eng. A, 803, 10.1016/j.msea.2020.140570 Mayer, 2007, TEM sample preparation and FIB-induced damage, MRS Bull., 32, 400, 10.1557/mrs2007.63 Asgari, 1997, Strain hardening regimes and microstructural evolution during large strain compression of low stacking fault energy fcc alloys that form deformation twins, Metall. Mater. Trans. A, 28, 1781, 10.1007/s11661-997-0109-3 Weidner, 2014, Nanoindentation measurements on deformation-induced α’-martensite in a metastable austenitic high-alloy CrMnNi steel, Philos. Mag. Lett., 94, 522, 10.1080/09500839.2014.941027 Chatterjee, 2006, Mechanical stabilisation of austenite, Mater. Sci. Technol., 22, 641, 10.1179/174328406X86128 He, 2020, On the factors governing austenite stability: intrinsic versus extrinsic, Materials, 13, 3440, 10.3390/ma13153440 Reed, 1960, The stability of austenitic stainless steels at low temperatures as determined by magnetic measurements, 84 Naghizadeh, 2019, Effects of grain size on mechanical properties and work‐hardening behavior of AISI 304 austenitic stainless steel, Steel Res. Int., 90, 10.1002/srin.201900153 Sipos, 1976, Influence of austenite predeformation on mechanical properties and strain-induced martensitic transformations of a high manganese steel, Metall. Trans. A, 7, 857, 10.1007/BF02644083 El-Tahawy, 2017, The influence of plastic deformation on lattice defect structure and mechanical properties of 316L austenitic stainless steel, Mater. Sci. Forum, 885, 13, 10.4028/www.scientific.net/MSF.885.13 Hong, 2019, Formation of strain-induced martensite in selective laser melting austenitic stainless steel, Mater. Sci. Eng. A, 740–741, 420, 10.1016/j.msea.2018.10.121 Bae, 2018, Exceptional phase-transformation strengthening of ferrous medium-entropy alloys at cryogenic temperatures, Acta Mater., 161, 388, 10.1016/j.actamat.2018.09.057 Polatidis, 2020, High ductility and transformation-induced-plasticity in metastable stainless steel processed by selective laser melting with low power, Scr. Mater., 176, 53, 10.1016/j.scriptamat.2019.09.035 Soleimani, 2020, Transformation-induced plasticity (TRIP) in advanced steels: a review, Mater. Sci. Eng. A, 795, 10.1016/j.msea.2020.140023