Decision making process in lean assessment and implementation: a review

Abdullah F (2003) Lean manufacturing tools and techniques in the process industry with a focus on steel. Doctoral dissertation, University of pittsburgh Abdulmalek FA, Rajgopal J (2007) Analyzing the benefits of lean manufacturing and value stream mapping via simulation: a process sector case study. Int J Prod Econ 107(1):223–236. https://doi.org/10.1016/j.ijpe.2006.09.009 Achanga P, Shehab E, Roy R, Nelder G (2012) A fuzzy-logic advisory system for lean manufacturing within SMEs. Int J Comput Integr Manuf 25(9):839–852. https://doi.org/10.1080/0951192X.2012.665180 Agarwal A, Shankar R, Tiwari MK (2006) Modeling the metrics of lean, agile and leagile supply chain: an ANP-based approach. Eur J Oper Res 173(1):211–225. https://doi.org/10.1016/j.ejor.2004.12.005 Agarwal P, Sahai M, Mishra V, Bag M, Singh V (2011) A review of multi-criteria decision making techniques for supplier evaluation and selection. Int J Ind Eng Comput 2(4):801–810. https://doi.org/10.5267/j.ijiec.2011.06.004 Agrahari RS, Dangle PA, Chandratre KV (2015) Implementation Of 5S methodology in the small scale industry a case study. Int J Sci Technol Res 4(4):180–187 Agrawal R, Asokan P, Vinodh S (2017) Benchmarking fuzzy logic and ANFIS approaches for leanness evaluation in an Indian SME: a case study. Benchmarking 24(4):973–993. https://doi.org/10.1108/BIJ-06-2016-0083 Ahuja IS (2011) Total productive maintenance practices in manufacturing organisations: literature review. Int J Technol Policy Manag 11(2):117–138. https://doi.org/10.1504/IJTPM.2011.040401 Aikhuele DO (2017) Systematic model for lean product development implementation in an automotive related company. Manag Sci Lett 7(7):337–350. https://doi.org/10.5267/j.msl.2017.4.003 Aikhuele DO, Oluwadare G (2019) Hybrid fuzzy inference system for evaluating lean product development practice. Evol Syst 10(2):249–259. https://doi.org/10.1007/s12530-018-9225-0 Aikhuele DO, Turan FM (2016) A hybrid fuzzy model for lean product development performance measurement. IOP Conf Ser Mater Sci Eng. https://doi.org/10.1088/1757-899X/114/1/012048 Akturk MS, Erhun F (1999) An overview of design and operational issues of kanban systems. Int J Prod Res 37(17):3859 Al-Aomar R, Hussain M (2018) An assessment of adopting lean techniques in the construct of hotel supply chain. Tour Manag 69(June):553–565. https://doi.org/10.1016/j.tourman.2018.06.030 Alaskari O, Ahmad MM, Pinedo-Cuenca R (2016) Development of a methodology to assist manufacturing SMEs in the selection of appropriate lean tools. Int J Lean Six Sigma 7(1):62–84. https://doi.org/10.1108/IJLSS-02-2015-0005 Alemi MA, Akram R (2013) Measuring the leanness of manufacturing systems by using fuzzy topsis: a case study of the ‘parizan sanat’ company. S Afr J Ind Eng 24(3):166–174. https://doi.org/10.7868/s0207352813080064 Alhuraish I, Robledo C, Kobi A (2016) Assessment of lean manufacturing and six sigma operation with decision making based on the analytic hierarchy process. IFAC-PapersOnLine 49(12):59–64. https://doi.org/10.1016/j.ifacol.2016.07.550 Ali RM, Deif AM (2014) Dynamic lean assessment for Takt time implementation. Proc CIRP 17(1):577–581. https://doi.org/10.1016/i.procir.2014.01.128 Ali R, Deif A (2016) Assessing leanness level with demand dynamics in a multi-stage production system. J Manuf Technol Manag 27(5):123–134 Almomani MA, Aladeemy M, Abdelhadi A, Mumani A (2013) A proposed approach for setup time reduction through integrating conventional SMED method with multiple criteria decision-making techniques. Comput Ind Eng 66(2):461–469. https://doi.org/10.1016/j.cie.2013.07.011 Almomani MA, Abdelhadi A, Mumani A, Momani A, Aladeemy M (2014) A proposed integrated model of lean assessment and analytical hierarchy process for a dynamic road map of lean implementation. Int J Adv Manuf Technol 72(1–4):161–172. https://doi.org/10.1007/s00170-014-5648-3 Almutairi AM, Salonitis K, Al-Ashaab A (2019) Assessing the leanness of a supply chain using multi-grade fuzzy logic: a health-care case study. Int J Lean Six Sigma 10(1):81–105. https://doi.org/10.1108/IJLSS-03-2018-0027 Alsyouf I, Al-Aomar R, Al-Hamed H, Qiu X (2011) A framework for assessing the cost effectiveness of lean tools. Eur J Ind Eng 5(2):170–197. https://doi.org/10.1504/EJIE.2011.039871 Alsyouf I, Al-Araidah O, Tates M, Ciganovic R (2012) A multi-criteria decision-making framework for assessing the quality and cost of facility layout alternatives: a case study. Proc Inst Mech Eng B J Eng Manuf 226(2):353–364. https://doi.org/10.1177/0954405411408664 ame.org (2018) AME Lean assessment. https://www.ame.org/lean-sensei-download/done?sid=6107 Amin MA (2013) a Systematic approach for selecting lean strategies and assessing leanness in manufacturing organizations. Queensland University of Technology, Brisbane Amin MA, Karim MA (2013) A time-based quantitative approach for selecting lean strategies for manufacturing organisations. Int J Prod Res 51(4):1146–1167. https://doi.org/10.1080/00207543.2012.693639 Anand G, Kodali R (2008) Selection of lean manufacturing systems using the PROMETHEE. J Model Manag 3(1):40–70. https://doi.org/10.1108/17465660810860372 Anand G, Kodali R (2009) Selection of lean manufacturing systems using the analytic network process: a case study. J Manuf Technol Manag 20(2):258–289. https://doi.org/10.1108/17410380910929655 Anvari A, Zulkifli N, Yusuff RM (2013) A dynamic modeling to measure lean performance within lean attributes. Int J Adv Manuf Technol 66(5–8):663–677. https://doi.org/10.1007/s00170-012-4356-0 Anvari A, Zulkifli N, Arghish O (2014a) Application of a modified VIKOR method for decision-making problems in lean tool selection. Int J Adv Manuf Technol 71(5–8):829–841. https://doi.org/10.1007/s00170-013-5520-x Anvari A, Zulkifli N, Sorooshian S, Boyerhassani O (2014b) An integrated design methodology based on the use of group AHP-DEA approach for measuring lean tools efficiency with undesirable output. Int J Adv Manuf Technol 70(9–12):2169–2186. https://doi.org/10.1007/s00170-013-5369-z Araz OU, Eski O, Araz C (2008) Determining the parameters of dual-card kanban system: An integrated multicriteria and artificial neural network methodology. Int J Adv Manuf Technol 38(9–10):965–977. https://doi.org/10.1007/s00170-007-1138-1 Arif-Uz-Zaman K (2012) A fuzzy TOPSIS based multi criteria performance measurement model for lean supply chain. Queensland University of Technology, Brisbane Arinze B, Kim SL, Banerjee A (1995) A multicriteria model for supporting setup reduction investment decisions. Prod Plan Control 6(5):413–420. https://doi.org/10.1080/09537289508930298 Arunagiri P, Gnanavelbabu A (2014a) Identification of high impact lean production tools in automobile industries using weighted average method. Proc Eng 97:2072–2080. https://doi.org/10.1016/j.proeng.2014.12.450 Arunagiri P, Gnanavelbabu A (2014b) Identification of major lean production waste in automobile industries using weighted average method. Proc Eng 97:2167–2175. https://doi.org/10.1016/j.proeng.2014.12.460 Asadi S, Panahi H (2011) A model for evaluating the degree of leanness case study: buttermilk production line in Tehran Pegah Milk Company. World Acad Sci Eng Technol 73(49):987–988 Assessment (2019) Assessment. https://www.systems2win.com/solutions/assessment.htm Azadeh A, Layegh J, Pourankooh P (2010) Optimal model for supply chain system controlled by kanban under JIT philosophy by integration of computer simulation and genetic algorithm. Aust J Basic Appl Sci 4(3):370–378 Azadeh A, Zarrin M, Abdollahi M, Noury S, Farahmand S (2015) Leanness assessment and optimization by fuzzy cognitive map and multivariate analysis. Expert Syst Appl 42(15–16):6050–6064. https://doi.org/10.1016/j.eswa.2015.04.007 Balaji K, Senthil Kumar VS (2018) Evaluation and selection of lean resourced employee in the manufacturing industries using the TOPSIS-Simos method. Proc Inst Mech Eng B J Eng Manuf 232(1):162–171. https://doi.org/10.1177/0954405416635069 Bayazit O (2005) Use of AHP in decision-making for flexible manufacturing systems. J Manuf Technol Manag 16(7):808–819 Bayo-Moriones A, Bello-Pintado A, Merino-Díaz de Cerio J (2010) 5S use in manufacturing plants: contextual factors and impact on operating performance. Int J Qual Reliab Manag 27(2):217–230 Bayou ME, de Korvin A (2008) Measuring the leanness of manufacturing systems: a case study of Ford Motor Company and General Motors. J Eng Technol Manag JET-M 25(4):287–304. https://doi.org/10.1016/j.jengtecman.2008.10.003 Bazrkar A, Iranzadeh S (2017) Prioritization of Lean Six Sigma improvement projects using data envelopment analysis cross efficiency model. Quality Access Success 18(157):72–76 Behrouzi F, Wong KY (2011) Lean performance evaluation of manufacturing systems: a dynamic and innovative approach. Proc Comput Sci 3:388–395. https://doi.org/10.1016/j.procs.2010.12.065 Behrouzi F, Wong KY (2013) An integrated stochastic-fuzzy modeling approach for supply chain leanness evaluation. Int J Adv Manuf Technol 68(5–8):1677–1696. https://doi.org/10.1007/s00170-013-4966-1 Bhamu J, Singh Sangwan K (2014) Lean manufacturing: literature review and research issues. Lean Manuf Literat Rev Res Issues 34(7):876–940 Bhasin S (2011) Measuring the Leanness of an organisation. Int J Lean Six Sigma 2(1):55–74 Bhasin S (2012) Performance of Lean in large organisations. J Manuf Syst 31(3):349–357 Boiko K (2021) R&D activity and firm performance: mapping the field. Manag Rev Q. https://doi.org/10.1007/s11301-021-00220-1 Boran S, Ekincioğlu C (2017) A novel integrated SMED approach for reducing setup time. Int J Adv Manuf Technol 92(9–12):3941–3951. https://doi.org/10.1007/s00170-017-0424-9 Boyer KK (1996) An assessment of managerial commitment to lean production. Int J Oper Prod Manag 16(9):48–59 Cabral I, Grilo A, Cruz-Machado V (2012) A decision-making model for Lean, Agile, Resilient and Green supply chain management. Int J Prod Res 50(17):4830–4845 Cetnarski EM, Ferreira CC, Eduarda M, Souza L, Eduardo S (2019) A literature review on lean maturity level tools. Retrieved from https://www.pomsmeetings.org/ConfProceedings/065/Full%20Papers/Final%20Full%20Papers/065-0431.pdf Cezar Lucato W, Araujo Calarge F, Loureiro Junior M, Damasceno Calado R (2014) Performance evaluation of lean manufacturing implementation in Brazil. Int J Product Perform Manag 63(5):529–549 Chan SW, Ismail F, Ahmad MF, Zaman I, Lim HQ (2019) Factors and barriers influencing Lean Production System adoption in manufacturing industries. Int J Supply Chain Manag 8(2):939–946 Chang TM, Yih Y (1994) Determining the number of kanbans and lotsizes in a generic kanban system: a simulated annealing approach. Int J Prod Res 32(8):1991–2004. https://doi.org/10.1080/00207549408957054 Chang TM, Yih Y (1998) A fuzzy rule-based approach for dynamic control of kanbans in a generic kanban system. Int J Prod Res 36(8):2247–2257. https://doi.org/10.1080/002075498192878 Chapman CD (2005) Clean house with lean 5S. Quality Progress June:27–32 Cil I, Turkan YS (2013) An ANP-based assessment model for lean enterprise transformation. Int J Adv Manuf Technol 64(5–8):1113–1130. https://doi.org/10.1007/s00170-012-4047-x citoolkit (2020) Lean audit checklist. https://citoolkit.com/templates/lean-audit-checklist/ Cottyn J, Van Landeghem H, Stockman K, Derammelaere S (2011) A method to align a manufacturing execution system with Lean objectives. Int J Prod Res 49(14):4397–4413. https://doi.org/10.1080/00207543.2010.548409 da Silva IB, Godinho Filho M (2019) Single-minute exchange of die (SMED): a state-of-the-art literature review. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-019-03484-w da Wan H, Chen FF (2009) Decision support for lean practitioners: a web-based adaptive assessment approach. Comput Ind 60(4):277–283. https://doi.org/10.1016/j.compind.2009.01.001 Dağdeviren M (2008) Decision making in equipment selection: an integrated approach with AHP and PROMETHEE. J Intell Manuf 19(4):397–406. https://doi.org/10.1007/s10845-008-0091-7 Darestani SA, Shamami NH (2019) Performance evaluation of lean production based on balanced score card method using ANP and SIR: a case from Iranian home appliance industry. Opsearch 56(3):717–738. https://doi.org/10.1007/s12597-019-00391-2 Deif A (2012a) Assessing lean systems using variability mapping. Int J Prod Res 3:2–7. https://doi.org/10.1016/j.procir.2012.07.002 Deif AM (2012b) Dynamic analysis of a lean cell under uncertainty. Int J Prod Res 50(4):1127–1139. https://doi.org/10.1080/00207543.2011.556154 Detty RB, Yingling JC (2000) Quantifying benefits of conversion to lean manufacturing with discrete event simulation: a case study. Int J Prod Res 38(2):429–445 Doolen TL, Hacker ME (2005) A review of lean assessment in organizations: an exploratory study of lean practices by electronics manufacturers. J Manuf Syst 24(1):55–67 Duarte S, Cruz Machado V (2017) Green and lean implementation: an assessment in the automotive industry. Int J Lean Six Sigma 8(1):65–88. https://doi.org/10.1108/IJLSS-11-2015-0041 Ekincioğlu C, Boran S (2018) SMED methodology based on fuzzy Taguchi method. J Enterp Inf Manag 31(6):867–878. https://doi.org/10.1108/JEIM-01-2017-0019 Elnadi M, Shehab E (2014) A conceptual model for evaluating product-service systems leanness in UK manufacturing companies. Proc CIRP 22(1):281–286. https://doi.org/10.1016/j.procir.2014.07.132 Elnadi M, Shehab E (2016) A multiple-case assessment of product-service system leanness in UK manufacturing companies. Proc Inst Mech Eng B J Eng Manuf 230(3):574–586 Farias LMS, Santos LC, Gohr CF, Rocha LO (2019) An ANP-based approach for lean and green performance assessment. Resour Conserv Recycl 143(October 2018):77–89. https://doi.org/10.1016/j.resconrec.2018.12.004 Feld WM (2000) Lean manufacturing: tools, techniques, and how to use them. CRC Press Forrester R (1995) Implications of lean manufacturing for human resource strategy. Work Study 44(3):20–24. https://doi.org/10.1108/00438029510146944 Fullerton R, Wempe WF (2009) Lean manufacturing, non-financial performance measures, and financial performance. Int J Oper Prod Manag 29(3):214–240. https://doi.org/10.1108/01443570910938970 Fullerton RR, McWatters CS, Fawson C (2003) An examination of the relationships between JIT and financial performance. J Oper Manag 21(4):383–404 Fullerton RR, Kennedy FA, Widener SK (2014) Lean manufacturing and firm performance: the incremental contribution of lean management accounting practices. J Oper Manag 32(7–8):414–428. https://doi.org/10.1016/j.jom.2014.09.002 Gandhi NS, Thanki SJ, Thakkar JJ (2018) Ranking of drivers for integrated lean-green manufacturing for Indian manufacturing SMEs. J Clean Prod. https://doi.org/10.1016/j.jclepro.2017.10.041 Ghodasara P, Yadav G, Seth D, Desai TN (2017) A Hybrid fuzzy AHP-ELECTRE approach to rank lean six sigma solutions: case experience of a manufacturing organisation. In: Proceedings of ICIE, pp 1159–1167 Godinho Filho M, Barco CF (2015) A framework for choosing among different lean-based improvement programs. Int J Adv Manuf Technol 81(1–4):183–197. https://doi.org/10.1007/s00170-015-7181-4 Goodson RE (2002) Read a plant: fast a conversation with Robert Redford. Harv Bus Rev 80(5):105–113 Guillén L, Sergio A, Manuel C (2021) Research on social responsibility of small and medium enterprises: a bibliometric analysis. Manag Rev Q. https://doi.org/10.1007/s11301-021-00217-w Gunasekaran A (1999) Agile manufacturing: a framework for research and development. Int J Prod Econ 62(1–2):87–105. https://doi.org/10.1016/S0925-5273(98)00222-9 Gupta V, Acharya P, Patwardhan M (2013) A strategic and operational approach to assess the lean performance in radial tyre manufacturing in India: a case based study. Int J Product Perform Manag 62(6):634–651. https://doi.org/10.1108/IJPPM-Jun-2012-0057 Gurumurthy A, Kodali R (2008) A multi-criteria decision-making model for the justification of lean manufacturing systems. Int J Manag Sci Eng Manag 3(2):100–118. https://doi.org/10.1080/17509653.2008.10671039 Gurumurthy A, Kodali R (2009) Application of benchmarking for assessing the lean manufacturing implementation. Benchmark Int J 16(2):274–308 Hallam CR (2004). Lean enterprise self-assessment as a leading indicator for accelerating transformation in the aerospace industry (Doctorate Dissertation). Massachusetts Institute of Technology, MA. Available from ProQuest Digital Dissertations & Theses database Haskin D (2010) Teaching special decisions in a lean accounting environment. Am J Bus Educ (AJBE) 3(6):1. https://doi.org/10.19030/ajbe.v3i6.447 Helleno AL, Pimentel CA, Ferro R, Santos PF, Oliveira MC, Simon AT (2015) Integrating value stream mapping and discrete events simulation as decision making tools in operation management. Int J Adv Manuf Technol 80(5–8):1059–1066. https://doi.org/10.1007/s00170-015-7087-1 Hill AV (2012) The encyclopedia of operations management: a field manual and glossary of operations management terms and concepts. FT Press, Pearson Hines P, Rich N (1997) The seven value stream mapping tools. Int J Oper Prod Manag 17(1):46–64. https://doi.org/10.1108/01443579710157989 Hines P, Holweg M, Rich N (2004) Learning to evolve: a review of contemporary lean thinking. Int J Oper Prod Manag 24(10):994–1011 Hopp WJ, Spearman ML (2011) Factory physics. Waveland Press Hosseini Nasab H, Aliheidari Bioki T, Khademi Zare H (2012) Finding a probabilistic approach to analyze lean manufacturing. J Clean Prod 29–30:73–81. https://doi.org/10.1016/j.jclepro.2012.02.017 Hu G, Wang L, Fetch S, Bidanda B (2008) A multi-objective model for project portfolio selection to implement lean and Six Sigma concepts. Int J Prod Res 46(23):6611–6625. https://doi.org/10.1080/00207540802230363 Im JH, Lee S (1989) Implementation of just-in-time systems in US manufacturing firms. Int J Oper Prod Manag 9(1):5–14 Initiative LA (2019) Lean enterprise self-assessment tool (LESAT) version 1.0. https://dspace.mit.edu/handle/1721.1/81903 Jasti NVK, Kodali R (2015) Lean production: literature review and trends. Int J Prod Res 53(3):867–885 Jasti NVK, Kodali R (2016) Development of a framework for lean production system: an integrative approach. Proc Inst Mech Eng B J Eng Manuf 230(1):136–156 Jordan JA, Michel FJ (2001) The lean company: making the right choices. Society of Manufacturing Engineers, Southfield Karim MA, Alam MR, Amin M (2010) Lean manufacturing strategy in a make to order manufacturing environment. ASOR Bull 29(3):34–47 Karim MA, Erns M, Amin M (2012) A method for evaluating lean assembly process at design stag. Sustain Manuf 2012:169–174 Karvonen T, Rodríguez P, Kuvaja P, Mikkonen K, Oivo M (2012) Adapting the lean enterprise self-assessment tool for the software development domain. In: 2012 38th Euromicro conference on software engineering and advanced applications, Cesme, Izmir, pp 266–273 Khalaf Albzeirat M (2018) Literature review: lean manufacturing assessment during the time period (2008–2017). Int J Eng Manag 2(2):29. https://doi.org/10.11648/j.ijem.20180202.12 Kim S-L, Arinze B (1992) A knowledge based decision support system for setup reduction. Decis Sci 23(6):1389–1407. https://doi.org/10.1111/j.1540-5915.1992.tb00455.x Krishnamurthy A, Chan WKV (2013) Investigating the impact of the dynamics associated with increasing responsiveness level on leanness. In: Proceedings of the 2013 industrial and systems engineering research conference, 22(May 18) Kuhlang P, Edtmayr T, Sihn W (2011) Methodical approach to increase productivity and reduce lead time in assembly and production-logistic processes. CIRP J Manuf Sci Technol 4(1):24–32 Kumar S, Sureka R, Colombage S (2020) Capital structure of SMEs: a systematic literature review and bibliometric analysis. Manag Rev Q. https://doi.org/10.1007/s11301-019-00175-4 Liu S, Leat M, Moizer J, Megicks P, Kasturiratne D (2013) A decision-focused knowledge management framework to support collaborative decision making for lean supply chain management. Int J Prod Res 51(7):2123–2137. https://doi.org/10.1080/00207543.2012.709646 Liu CC, Niu ZW, Chang PC, Zhang B (2017) Assessment approach to stage of lean transformation cycle based on fuzzy nearness degree and TOPSIS. Int J Prod Res 55(23):7223–7235 Lodge D (2017) Lean production simplified: a plain-language guide to the world’s most powerful production system. Productivity Press, New York Lu JC, Yang T, Wang CY (2011) A lean pull system design analysed by value stream mapping and multiple criteria decision-making method under demand uncertainty. Int J Comput Integr Manuf 24(3):211–228. https://doi.org/10.1080/0951192X.2010.551283 Lu JC, Yang T, Suc CT (2012) Analysing optimum push/pull junction point location using multiple criteria decision-making for multistage stochastic production system. Int J Prod Res 50(19):5523–5537. https://doi.org/10.1080/00207543.2011.648778 Malmbrandt M, Åhlström P (2013) An instrument for assessing lean service adoption. Int J Oper Prod Manag 33(9):1131–1165 Marlow PB, Casaca ACP (2003) Measuring lean ports performance. Int J Transp Manag 1(4):189–202. https://doi.org/10.1016/j.ijtm.2003.12.002 Mason-Jones R, Naylor B, Towill DR (2000) Lean, agile or leagile? Matching your supply chain to the marketplace. Int J Prod Res 38(17):4061–4070. https://doi.org/10.1080/00207540050204920 Matawale CR, Datta S, Mahapatra SS (2014) Leanness estimation procedural hierarchy using interval-valued fuzzy sets (IVFS). Benchmark Int 21(2):150–183 Matawale CR, Datta S, Mahapatra SS (2015) Leanness metric evaluation platform in fuzzy context. J Modell Manag 10(2):238–267 Matt DT, Rauch E (2013) Implementation of lean production in small sized enterprises. Proc CIRP 12:420–425. https://doi.org/10.1016/j.procir.2013.09.072 Mejabi OO (2003) Framework for a lean manufacturing planning system. Int J Manuf Technol Manag 5(5–6):563–578. https://doi.org/10.1504/IJMTM.2003.003710 Melton T (2005) The benefits of lean manufacturing: What lean thinking has to offer the process industries. Chem Eng Res Des 83(6A):662–673. https://doi.org/10.1205/cherd.04351 Miller D, Hartwick J (2002) Spotting management fads. Harv Bus Rev 80(10):2009 Modarress B, Ansari A, Lockwood DL (2005) Kaizen costing for lean manufacturing: a case study. Int J Prod Res 43(9):1751–1760. https://doi.org/10.1080/00207540500034174 Moeeni F, Sanchez SM, Vakharia AJ (1997) A robust design methodology for Kanban system design. Int J Prod Res 35(10):2821–2838. https://doi.org/10.1080/002075497194462 Mohammad M (2012) Development of a guidance model for the selection of organisational improvement initiatives. Doctoral dissertation, Massey University Mohammad M, Ali Hussein M, Yahya MS (2017) Factors to consider in selecting an organisational improvement initiative: survey results. MATEC Web Conf 135:1–7. https://doi.org/10.1051/matecconf/201713500027 Mothilal DRSK (2017) Coalesce of automation and SMED to enhance SUR? A case study. Int J Sci Res (IJSR) 6(5):1287–1291 Narayanamurthy G, Gurumurthy A (2016) Leanness assessment: a literature review. Int J Oper Prod Manag 36(10):1115–1160 Narayanamurthy G, Gurumurthy A (2018) Is the hospital lean? A mathematical model for assessing the implementation of lean thinking in healthcare institutions. Oper Res Health Care 18:84–98. https://doi.org/10.1016/j.orhc.2017.05.002 Nawanir G, Lim K, Othman S (2015) Measurement instrument for lean manufacturing. Int J Appl Sci Technol 5(4):102–111 Nightingale DJ, Mize JH (2002) Development of a lean enterprise transformation maturity model. Inform Knowl Syst Manag 3(1):15–30 Niu ZW, Zuo B, Li WH (2010) Lean production and its application assessment using set pair analysis. In: 2010 IEEE 17th international conference on industrial engineering and engineering management, pp 532–536 Ohno T (1988) Toyota production system: beyond large-scale production. CRC Press Oleghe O, Salonitis K (2016) Variation modeling of lean manufacturing performance using fuzzy logic based quantitative lean index. Proc CIRP 41:608–613. https://doi.org/10.1016/j.procir.2016.01.008 Omogbai O, Salonitis K (2016) A lean assessment tool based on systems dynamics. Proc CIRP 50:106–111. https://doi.org/10.1016/j.procir.2016.04.169 Omogbai O, Salonitis K (2017) The implementation of 5s lean tool using system dynamics approach. Proc CIRP 60:380–385. https://doi.org/10.1016/j.procir.2017.01.057 Ounnar F, Pujo P (2012) Pull control for job shop: Holonic manufacturing system approach using multicriteria decision-making. J Intell Manuf 23(1):141–153. https://doi.org/10.1007/s10845-009-0288-4 Overboom MA, De Haan JAC, Naus AJAM (2010) Measuring the degree of leanness in logistics service providers: development of a measurement tool. In: Proceedings of the 17th international annual EurOMA conference: managing operations in service economies, european operations management association, Porto, June, pp 6–9 Pakdil F, Leonard KM (2014) Criteria for a lean organisation: Development of a lean assessment tool. Int J Prod Res 52(15):4587–4607. https://doi.org/10.1080/00207543.2013.879614 Pangsri P (2014) A decision framework to select alternative based on lean manufacturing concepts in design processes. J Ind Intell Inf 2(1):1–5. https://doi.org/10.12720/jiii.2.1.1-5 Panizzolo R (1998) Applying the lessons learned from 27 lean manufacturers. Relev Relation Manag 55:223–240. https://doi.org/10.1016/S0925-5273(98)00066-8 Panizzolo R, Garengo P, Sharma MK, Gore A (2012) Lean manufacturing in developing countries: evidence from Indian SMEs. Prod Plan Control 23(10–11):769–788 Pavnaskar SJ, Gershenson JK, Jambekar AB (2003) Classification scheme for lean manufacturing tools. Int J Prod Res 41(13):3075–3090. https://doi.org/10.1080/0020754021000049817 Pérez MP, Sánchez AM (2000) Lean production and supplier relations: a survey of practices in the Aragonese automotive industry. Technovation 12(20):665–676 Pertuz V, Pérez A (2021) Innovation management practices: review and guidance for future research in SMEs. Manag Rev Q. https://doi.org/10.1007/s11301-020-00183-9 Pmpa (2019) Lean-self-assessment-spreadsheet. https://www.pmpa.org/knowledge-tools/shop-floor-operations/all-shop-floor-operations-references/2006/02/20/lean-self-assessment-spreadsheet Psomas E, Antony J (2019) Research gaps in Lean manufacturing: a systematic literature review. Int J Qual Reliab Manag 36(5):815–839. https://doi.org/10.1108/IJQRM-12-2017-0260 Pullan TT, Bhasi M, Madhu G (2013) Decision support tool for lean product and process development. Prod Plan Control 24(6):449–464. https://doi.org/10.1080/09537287.2011.633374 Ram Matawale C, Datta S, Sankar Mahapatra S (2014) Lean metric appraisement: exploration of grey numbers set theory. Grey Syst Theory Appl 4(3):400–425. https://doi.org/10.1108/gs-03-2014-0008 Ramesh V, Kodali R (2012) A decision framework for maximising lean manufacturing performance. Int J Prod Res 50(8):2234–2251. https://doi.org/10.1080/00207543.2011.564665 Ramnath BV, Elanchezhian C, Kesavan DR (2010) Suitability assessment of lean kitting assembly through fuzzy based simulation model. Int J Comput Appl 4(1):25–31. https://doi.org/10.5120/795-1129 Ravikumar MM, Marimuthu K, Parthiban P (2015) Evaluating lean implementation performance in Indian MSMEs using ISM and AHP models. Int J Serv Oper Manag 22(1):21–39. https://doi.org/10.1504/IJSOM.2015.070881 Ravikumar MM, Marimuthu K, Parthiban P, Zubar HA (2016) Evaluating lean execution performance in Indian MSMEs using SEM and TOPSIS models. Int J Oper Res 26(1):104–125. https://doi.org/10.1504/IJOR.2016.075652 Ray CD, Zuo X, Michael JH, Wiedenbeck JK (2006) The lean index: Operational “lean” metrics for the wood products industry. Wood Fiber Sci 38(2):238–255 Razmi J, Seifoory M, Pishvaee MS (2011) A fuzzy multi-attribute decision making model for selecting the best supply chain strategy: Lean, agile or leagile. Adv Ind Eng 45:127–142 Rehman AU, Alkhatani M, Umer U (2018) Multi criteria approach to measure leanness of a manufacturing organization. IEEE Access 6(c):20987–20994. https://doi.org/10.1109/ACCESS.2018.2825344 Rojasra PM, Qureshi MN (2013) Performance improvement through 5S in Small Scale Industry: a case study. Int J Mod Eng Res (IJMER) 3(3):1654–1660 Ruben RB, Asokan P, Vinodh S (2017) Performance evaluation of lean sustainable systems using adaptive neuro fuzzy inference system: a case study. Int J Sustain Eng 10(3):158–175. https://doi.org/10.1080/19397038.2017.1286409 Ruiz-de-Arbulo-Lopez P, Jordi Fortuny-Santos LC (2013) Lean manufacturing: costing the value stream. Ind Manag Data Syst Lean 113(5):647–668 Saaty TL (1990) How to make a decision: the analytic hierarchy process. Eur J Oper Res 48(1):9–26 Saleeshya PG, Binu M (2019) A neuro-fuzzy hybrid model for assessing leanness of manufacturing systems. Int J Lean Six Sigma 10(1):473–499. https://doi.org/10.1108/IJLSS-05-2017-0040 Sanati FR, Mohamad S, Hosseini S (2008) New concept in leanness development and assessment in plant life cycle (PLC). IUST Int J Eng Sci 19(1):57–65 Saunders M, Mann R (2007) business excellence tools: the tools used by companies at different stages of business excellence maturity. Centre for Organisational Excellence Research, Palmerston North, New Zealand, Consultancy Report. https://doi.org/10.13140/RG.2.1.2219.5684 Saurin TA, Marodin GA, Ribeiro JLD (2011) A framework for assessing the use of lean production practices in manufacturing cells. Int J Prod Res 49(11):3211–3230. https://doi.org/10.1080/00207543.2010.482567 Scherrer-Rathje M, Boyle TA, Deflorin P (2009) Lean, take two! Reflections from the second attempt at lean implementation. Bus Horiz 52(1):79–88. https://doi.org/10.1016/j.bushor.2008.08.004 Scribd (2019) Lean assessment. https://www.scribd.com/document/249933634/Lean-Assessment-xls Serrano I, Ochoa C, De Castro R (2008) Evaluation of value stream mapping in manufacturing system redesign. Int J Prod Res 46(16):4409–4430. https://doi.org/10.1080/00207540601182302 Seyedhosseini SM, Taleghani AE, Bakhsha A, Partovi S (2011) Extracting leanness criteria by employing the concept of Balanced Scorecard. Expert Syst Appl 38(8):10454–10461. https://doi.org/10.1016/j.eswa.2011.02.095 Seyedi SN, Hakimi S, Ahmadi HB, Rezvan P, Izadifar M (2013) A decision-making process for selecting of lean tools implementation methods by means of analytical hierarchy process in health center. Jurnal Teknologi Sci Eng 64(3):149–152. https://doi.org/10.11113/jt.v64.2286 Sezen B, Karakadilar IS, Buyukozkan G (2012) Proposition of a model for measuring adherence to lean practices: applied to Turkish automotive part suppliers. Int J Prod Res 50(14):3878–3894 Shah R, Ward PT (2003) Defining and developing measures of lean production. J Oper Manag 25(4):785–805 Shakoor M, Qureshi MR, Jadayil WA, Jaber N (2017) Assessment of retail practices for providing enhanced value added services and improved customer satisfaction using lean manufacturing approach. Int Rev Manag Market 7(2):360–366 Shams Bidhendi S, Goh S, Wandel A (2019) Development of a weighted leanness measurement method in modular construction companies. J Ind Eng Int 15(4):603–625. https://doi.org/10.1007/s40092-019-0313-y Sharma S, Shah B (2016) Towards lean warehouse: transformation and assessment using RTD and ANP. Int J Product Perform Manag 65(4):571–599. https://doi.org/10.1108/IJPPM-04-2015-0061 Shingo S (2019) A revolution in manufacturing: the SMED system. Revol Manuf SMED Syst. https://doi.org/10.4324/9781315136479 Singh J, Ubhi MS (2017) Assessment of lean tools implementations in auto parts industries of Ludhiana. Int J Adv Multidisc Res 9(1):53–59 Singh RK, Choudhury AK, Tiwari MK, Maull RS (2006a) An integrated fuzzy-based decision support system for the selection of lean tools: a case study from the steel industry. Proc Inst Mech Eng B J Eng Manuf 220(10):1735–1749. https://doi.org/10.1243/09544054JEM494 Singh RK, Kumar S, Choudhury AK, Tiwari MK (2006b) Lean tool selection in a die casting unit: a fuzzy-based decision support heuristic. Int J Prod Res 44(7):1399–1429. https://doi.org/10.1080/00207540500272980 Singh B, Garg SK, Sharma SK (2010) Development of index for measuring leanness: study of an Indian auto component industry. Meas Bus Excell 14(2):46–53. https://doi.org/10.1108/13683041011047858 Smith R, Hawkins B (2004) Lean maintenance: reduce costs, improve quality, and increase market share. Elsevier Soberi MSF, Ahmad R (2016) Application of fuzzy AHP for setup reduction in manufacturing industry. J Eng Res Educ 8(January):73–84 Sopelana A, Flores M, Martinez L, Flores K, Sorli M (2012) The application of an assessment tool for lean product development: an exploratory study in Spanish Companies. In: 2012 18th international ICE conference on engineering, technology and innovation. IEEE, pp 1–10 Soriano-meier H, Forrester PL (2002) A model for evaluating the degree of leanness of manufacturing firms. Integr Manuf Syst 13(2):104–109. https://doi.org/10.1108/09576060210415437 Srinivasaraghavan J, Allada V (2006) Application of mahalanobis distance as a lean assessment metric. Int J Adv Manuf Technol 29(11–12):1159–1168. https://doi.org/10.1007/s00170-005-0004-2 Stone KB (2012) Four decades of lean: a systematic literature review. Int J Lean Six Sigma 3(2):112–132. https://doi.org/10.1108/20401461211243702 Strategosinc (2012) Commentary-lean assessment questionnaire. http://www.strategosinc.com/downloads/lean_assessment-dl0.htm Suárez-Barraza MF, Smith T, Dahlgaard-Park SM (2012) Lean service: a literature analysis and classification. Total Qual Manag Bus Excell 23(3–4):359–380 Sundar R, Balaji AN, Satheesh Kumar RM (2014) A review on lean manufacturing implementation techniques. Proc Eng 97:1875–1885. https://doi.org/10.1016/j.proeng.2014.12.341 Susilawati A, Tan J, Bell D, Sarwar M (2015) Fuzzy logic based method to measure degree of lean activity in manufacturing industry. J Manuf Syst 34(C):1–11. https://doi.org/10.1016/j.jmsy.2014.09.007 Takahashi K, Morikawa K, Hirotani D, Yoshikawa T (2010) Adaptive Kanban control systems for two-stage production lines. Int J Manuf Technol Manag 20(1–4):75–93 Tayaksi C, Sagnak M, Kazancoglu Y (2020) A new holistic conceptual framework for leanness assessment. Int J Math Eng Manag Sci 5(4):567–590. https://doi.org/10.33889/IJMEMS.2020.5.4.047 Teichgräber UK, de Bucourt M (2012) Applying value stream mapping techniques to eliminate non-value-added waste for the procurement of endovascular stents. Eur J Radiol 81(1):e47–e52 Thanki S, Govindan K, Thakkar J (2016) An investigation on lean-green implementation practices in Indian SMEs using analytical hierarchy process (AHP) approach. J Clean Prod 135:284–298. https://doi.org/10.1016/j.jclepro.2016.06.105 Thawesaengskulthai N (2007) Selecting quality management and improvement initiatives: case studies of industries in thailand. Doctoral dissertation, PhD Thesis, University of Nottingham Thawesaengskulthai N (2010) An empirical framework for selecting quality management and improvement initiatives. Int J Qual Reliab Manag 27(2):156–172 Thawesaengskulthai N, Tannock J (2008a) Pay-off selection criteria for quality and improvement initiatives. Int J Qual Reliab Manag 25(4):366–382 Thawesaengskulthai N, Tannock JDT (2008b) A decision aid for selecting improvement methodologies. Int J Prod Res 46(23):6721–6737. https://doi.org/10.1080/00207540802230553 Thomas T, Saleeshya PG, Kumar PH (2017) A combined AHP and ISM-based model to assess the leanness of a manufacturing company. Int J Bus Perform Manag 18(4):403–426. https://doi.org/10.1504/IJBPM.2017.087106 Tiwari RK, Tiwari JK (2018) Evaluating lean performance of indian small and medium sized enterprises in automotive sector. Open Eng 8(1):293–306. https://doi.org/10.1515/eng-2018-0032 Tiwari A, Turner C, Sackett P (2007) A framework for implementing cost and quality practices within manufacturing. J Manuf Technol Manag 18(6):731–760 Veza I, Mladineo M, Gjeldum N (2016) Selection of the basic lean tools for development of croatian model of innovative smart enterprise. Tehnicki Vjesnik 23(5):1317–1324. https://doi.org/10.17559/TV-20160202120909 Vidyadhar R, Sudeep Kumar R, Vinodh S, Antony J (2016) Application of fuzzy logic for leanness assessment in SMEs: a case study. J Eng Des Technol 14(1):78–103 Vimal KEK, Vinodh S (2012) Leanness evaluation using IF-THEN rules. Int J Adv Manuf Technol 63(1–4):407–413. https://doi.org/10.1007/s00170-012-3919-4 Vimal KEK, Vinodh S (2013) Application of artificial neural network for fuzzy logic based leanness assessment. J Manuf Technol Manag 24(2):274–292. https://doi.org/10.1108/17410381311292340 Vinodh S, Aravindraj S (2013) Evaluation of leagility in supply chains using fuzzy logic approach. Int J Prod Res 51(4):1186–1195. https://doi.org/10.1080/00207543.2012.693960 Vinodh S, Balaji SR (2011) Fuzzy logic based leanness assessment and its decision support system. Int J Prod Res 49(13):4027–4041. https://doi.org/10.1080/00207543.2010.492408 Vinodh S, Chintha SK (2011) Leanness assessment using multi-grade fuzzy approach. Int J Prod Res 49(2):431–445. https://doi.org/10.1080/00207540903471494 Vinodh S, Devadasan SR (2011) Twenty criteria based agility assessment using fuzzy logic approach. Int J Adv Manuf Technol 54(9–12):1219–1231. https://doi.org/10.1007/s00170-010-3015-6 Vinodh S, Joy D (2012) Structural Equation Modelling of lean manufacturing practices. Int J Prod Res 50(6):1598–1607. https://doi.org/10.1080/00207543.2011.560203 Vinodh S, Kumar CD (2012) Development of computerized decision support system for leanness assessment using multi grade fuzzy approach. J Manuf Technol Manag 23(4):503–516. https://doi.org/10.1108/17410381211230457 Vinodh S, Kumar Chintha S (2011) Application of fuzzy QFD for enabling leanness in a manufacturing organisation. Int J Prod Res 49(6):1627–1644. https://doi.org/10.1080/00207540903568729 Vinodh S, Vimal KEK (2012) Thirty criteria based leanness assessment using fuzzy logic approach. Int J Adv Manuf Technol 60(9–12):1185–1195. https://doi.org/10.1007/s00170-011-3658-y Vinodh S, Prakash NH, Selvan KE (2011a) Evaluation of leanness using fuzzy association rules mining. Int J Adv Manuf Technol 57(1–4):343–352. https://doi.org/10.1007/s00170-011-3260-3 Vinodh S, Shivraman KR, Viswesh S (2011b) AHP-based lean concept selection in a manufacturing organization. J Manuf Technol Manag 23(1):124–136. https://doi.org/10.1108/17410381211196320 Vinodh S, Madhyasta UR, Praveen T (2012) Scoring and multi-grade fuzzy assessment of agility in an Indian electric automotive car manufacturing organisation. Int J Prod Res 50(3):647–660. https://doi.org/10.1080/00207543.2010.543179 Walter AT (2021) Organizational agility: ill-defined and somewhat confusing? A systematic literature review and conceptualization. Manag Rev Q. https://doi.org/10.1007/s11301-020-00186-6 Walter OMFC, Tubino DF (2013) Métodos de avaliação da implantação da manufatura enxuta: uma revisão da literatura e classificação. Gestão Produção 20(1):23–45 Wan HD, Frank Chen F (2008) A leanness measure of manufacturing systems for quantifying impacts of lean initiatives. Int J Prod Res 46(23):6567–6584. https://doi.org/10.1080/00207540802230058 Wang S, Taj S (2005) Applying lean assessment tools in Chinese hi‐tech industries. Management Decision Wang H, Gong Q, Wang S (2017) Information processing structures and decision making delays in MRP and JIT. Int J Prod Econ 188(80):41–49. https://doi.org/10.1016/j.ijpe.2017.03.016 Ward PT, Shah R, Ward PT (2002) Lean manufacturing: context, practice bundles, and performance. J Oper Manag 21:129–149. https://doi.org/10.1016/S0272-6963(02)00108-0 Womack JP, Jones DT (1997) Lean thinking—banish waste and create wealth in your corporation. J Oper Res Soc 48(11):1148–1148 Wong WP, Ignatius J, Soh KL (2014) What is the leanness level of your organisation in lean transformation implementation? An integrated lean index using ANP approach. Prod Plan Control 25(4):273–287. https://doi.org/10.1080/09537287.2012.674308 Yadav G, Desai TN (2017a) A fuzzy AHP approach to prioritize the barriers of integrated Lean Six Sigma. Int J Qual Reliab Manag 34(8):1167–1185. https://doi.org/10.1108/IJQRM-01-2016-0010 Yadav G, Desai TN (2017b) Analyzing Lean Six Sigma enablers: a hybrid ISM-fuzzy MICMAC approach. TQM J 29(3):488–510. https://doi.org/10.1108/TQM-04-2016-0041 Yadav G, Seth D, Desai TN (2018a) Application of hybrid framework to facilitate lean six sigma implementation: a manufacturing company case experience. Prod Plan Control 29(3):185–201. https://doi.org/10.1080/09537287.2017.1402134 Yadav G, Seth D, Desai TN (2018b) Prioritising solutions for Lean Six Sigma adoption barriers through fuzzy AHP-modified TOPSIS framework. Int J Lean Six Sigma 9(3):270–300. https://doi.org/10.1108/IJLSS-06-2016-0023 Yadav V, Jain R, Mittal ML, Panwar A, Sharma MK (2019a) An appraisal on barriers to implement lean in SMEs. J Manuf Technol Manag 30(1):195–212. https://doi.org/10.1108/JMTM-12-2017-0262 Yadav V, Khandelwal G, Jain R, Mittal ML (2019b) Development of leanness index for SMEs. Int J Lean Six Sigma 10(1):397–410. https://doi.org/10.1108/IJLSS-09-2017-0109 Yadav G, Luthra S, Huisingh D, Mangla SK, Narkhede BE, Liu Y (2020) Development of a lean manufacturing framework to enhance its adoption within manufacturing companies in developing economies. J Clean Prod 245:118726. https://doi.org/10.1016/j.jclepro.2019.118726 Yahya MS, Mohammad M, Omar B, Ramly EF (2016) A review on the selection of lean production tools and techniques. ARPN J Eng Appl Sci 11(12):7721–7727 Yang T, Lu JC (2011) The use of a multiple attribute decision-making method and value stream mapping in solving the pacemaker location problem. Int J Prod Res 49(10):2793–2817. https://doi.org/10.1080/00207541003801267 Yoon KP, Hwang C (1995) Multiple attribute decision making: an introduction. Sage publications, Sage Zanjirchi SM, Tooranlo HS, Nejad LZ (2010) Measuring organizational leanness using fuzzy approach. In: Proceedings of the 2010 international conference on industrial engineering and operations management, pp 144–156 Zhou B, Zhao Q, Helgi T, Fridriksson V, Jafari H, Fredriksson V (2010) Application of lean focus on manufacturing process a case study of american furniture company. May. Retrieved from http://www.diva-portal.org/smash/get/diva2:344865/fulltext01