Damage detection of carbon fiber reinforced polymer composites via electrical resistance measurement

Kaczmarek, 1994, Comparative ultrasonic analysis of damage in CFRP under static indentation and low-velocity impact, Compos Sci Technol, 51, 11, 10.1016/0266-3538(94)90152-X Trappe, 2006, Intralaminar fatigue behaviour of carbon fibre reinforced plastics, Int J Fatigue, 28, 1187, 10.1016/j.ijfatigue.2006.02.037 Bai, 2001, Evaluation of defects in composite plates under convective environments using lock-in thermography, Meas Sci Technol, 12, 142, 10.1088/0957-0233/12/2/303 Mook, 2001, Non-destructive characterisation of carbon-fibre-reinforced plastics by means of eddy-currents, Compos Sci Technol, 61, 865, 10.1016/S0266-3538(00)00164-0 Wang, 1998, Short carbon fiber reinforced epoxy coating as a piezoresistive strain sensor for cement mortar, Sensor Actuators A, 71, 208, 10.1016/S0924-4247(98)00187-3 Takeda, 2002, Delamination detection in CFRP laminates with embedded small-diameter fiber Bragg grating sensors, Composites Part A, 33, 971, 10.1016/S1359-835X(02)00036-2 Wang, 2002, Mechanical damage in carbon fiber polymer–matrix composite, studied by electrical resistance measurement, Compos Interf, 9, 51, 10.1163/156855402753642890 Wang, 2001, Interlaminar damage in carbon fiber polymer–matrix composites, studied by electrical resistance measurement, Int J Adhes Adhes, 21, 465, 10.1016/S0143-7496(01)00023-9 Schulte, 1989, Load and failure analyses of CFRP laminates by means of electrical resistivity measurements, Compos Sci Technol, 36, 63, 10.1016/0266-3538(89)90016-X Selzer, 1997, Mechanical properties and failure behaviour of carbon fiber-reinforced polymer composites under the influence of moisture, Composites Part A, 28A, 595, 10.1016/S1359-835X(96)00154-6 Lodge, 1982, The electrical properties of joints in carbon fibre composites, Composites, 305, 10.1016/0010-4361(82)90014-3 Belchamber, 1985, Evaluation of pattern recognition analysis of acoustic emission from stressed polymers and composites, J Acoust Emiss, 4, 71 Clerico, 1989, Analysis of impact damage and residual static strength in improved CFRP, Int J Mater Prod Technol, 4, 61 Haque, 1998, Monitoring fatigue damage in carbon fiber composites using an acoustic impact technique, Mater Eval, 56, 765 Verma, 1994, Acoustic emission monitoring of damage using high amplitude gains in carbon fiber reinforced poly, J Mater Sci Lett, 13, 438, 10.1007/BF00278022 Tang, 1989, Lamb-wave monitoring of axial stiffness reduction of laminate composite plates, Mater Eval, 47, 928 Toyama, 2003, Quantitative damage detection in cross-ply laminates using Lamb wave method, Compos Sci Technol, 63, 1473, 10.1016/S0266-3538(03)00163-5 Vipperman, 1999, Novel autonomous structural health monitoring using piezoelectrics, Struct Dyn Mater, 4, 3107 Mian, 2004, Fatigue damage detection in graphite/epoxy composites using sonic infrared imaging technique, Compos Sci Technol, 64, 657, 10.1016/j.compscitech.2003.07.005 Wang, 2006, Method of sensing impact damage in carbon fiber polymer–matrix composite by electrical resistance measurement, J Mater Sci, 41, 2281, 10.1007/s10853-006-7172-9 Angelidis, 2004, The electrical resistance response of continuous carbon fiber composite laminates to mechanical strain, Composites Part A, 35, 1135, 10.1016/j.compositesa.2004.03.020 Todoroki, 2004, Multi-prove electric potential change method for delamination monitoring of graphite/composite plates using normalized response surfaces, Compos Sci Technol, 62, 749, 10.1016/j.compscitech.2003.08.004 Abry, 2001, In-situ monitoring of damage in CFRP laminates by means of AC and DC measurements, Compos Sci Technol, 61, 855, 10.1016/S0266-3538(00)00181-0 Kupke, 2001, Non-destructive testing of FRP by d.c. and a.c. electrical methods, Compos Sci Technol, 61, 837, 10.1016/S0266-3538(00)00180-9 Abry, 1999, In situ detection of damage in CFRP laminates by electrical resistance measurements, Compos Sci Technol, 59, 925, 10.1016/S0266-3538(98)00132-8 Wang, 1996, Continuous carbon fiber epoxy–matrix composite as a sensor of its own strain, Smart Mater Struct, 5, 796, 10.1088/0964-1726/5/6/009 Wang, 2006, Self-sensing of flexural strain and damage in carbon fiber polymer–matrix composite by electrical resistance measurement, Carbon, 44, 2739, 10.1016/j.carbon.2006.03.034 Wang, 1999, Sensing damage in carbon fiber and its polymer–matrix and carbon–matrix composites by electrical resistance measurement, J Mater Sci, 34, 2703, 10.1023/A:1004629505992 Wang, 2005, Self-sensing of damage in carbon fiber polymer–matrix composite by measurement of the electrical resistance or potential away from the damaged region, J Mater Sci, 40, 6463, 10.1007/s10853-005-1708-2 Wang, 1997, Real-time monitoring of fatigue damage and dynamic strain in carbon fiber polymer–matrix composite by electrical resistance measurement, Smart Mater Struct, 6, 504, 10.1088/0964-1726/6/4/017 Wang, 1997, Sensing delamination in a carbon fiber polymer–matrix composite during fatigue by electrical resistance measurement, Polym Compos, 18, 692, 10.1002/pc.10322 Irving, 1998, Fatigue damage characterization in carbon fiber composite materials using an electrical potential technique, Smart Mater Struct, 7, 456, 10.1088/0964-1726/7/4/004 Chung, 2000, Thermal analysis of carbon fiber polymer–matrix composites by electrical resistance measurement, Thermochim Acta, 364, 121, 10.1016/S0040-6031(00)00631-6 Shui, 1996, A piezoresistive carbon filament polymer–matrix composite strain sensor, Smart Mater Struct, 5, 243, 10.1088/0964-1726/5/2/014 Todoroki, 2002, Measurement of orthotropic electric conductance of CFRP laminates and analysis of the effect on delamination monitoring with an electric resistance change method, Compos Sci Technol, 62, 619, 10.1016/S0266-3538(02)00019-2 Todoroki, 2005, Electrical resistance change method for monitoring delaminations of CFRP laminates: effect of spacing between electrodes, Compos Sci Technol, 65, 37, 10.1016/j.compscitech.2004.05.018 Todoroki, 2002, Delamination identification of cross-ply graphite/epoxy composite beams using electric resistance change method, Compos Sci Technol, 62, 629, 10.1016/S0266-3538(02)00013-1 Todoroki, 2001, The effect of number of electrodes and diagnostic tool for monitoring the delamination of CFRP laminates b changes in electrical resistance, Compos Sci Technol, 61, 1871, 10.1016/S0266-3538(01)00088-4 Matsuzaki, 2006, Wireless detection of internal delamination cracks in CFRP laminates using oscillating frequency changes, Compos Sci Technol, 66, 407, 10.1016/j.compscitech.2005.07.016 Park, 2005, Cure monitoring and residual stress sensing of single-carbon fiber reinforced epoxy composites using electrical resistivity measurement, Compos Sci Technol, 65, 571, 10.1016/j.compscitech.2004.09.019 Shen, 2007, Modeling and analysis of the electrical resistance measurement of carbon fiber polymer–matrix composites, Compos Sci Technol, 67, 2513, 10.1016/j.compscitech.2006.12.020 Park, 2002, Electromechanical modeling of unidirectional CFRP composites under tensile loading condition, Composites Part A, 33, 267, 10.1016/S1359-835X(01)00097-5 Curtin, 1999, Stochastic damage evolution and failure in fiber-reinforced composites, Adv Appl Mech, 36, 163, 10.1016/S0065-2156(08)70186-8 Xia, 2003, Quantitative damage detection in CFRP composites: coupled mechanical and electrical models, Compos Sci Technol, 63, 1411, 10.1016/S0266-3538(03)00083-6 Fiedler, 2006, Micro/macro-mechanical approach of first ply failure in CFRP, J Mater Sci, 41, 6760, 10.1007/s10853-006-0215-4 Xia, 2007, Modeling of mechanical damage detection in CFRPs via electrical resistance, Compos Sci Technol, 67, 1518, 10.1016/j.compscitech.2006.07.017 Xia, 2008, Damage detection via electrical resistance in CFRP composites under cyclic loading, Compos Sci Technol, 68, 2526, 10.1016/j.compscitech.2008.05.007 Park, 2003, New concept for modeling the electromechanical behavior of unidirectional carbon-fiber-reinforced plastic under tensile loading, Smart Mater Struct, 12, 105, 10.1088/0964-1726/12/1/312 Smith, 2008, Monitoring damage accumulation in ceramic matrix composites using electrical resistivity, Scripta Mater, 59, 463, 10.1016/j.scriptamat.2008.04.033 Mei, 2005, Damage analysis of 2D C/SiC composites subjected to thermal cycling in oxidizing environments by mechanical and electrical characterization, Mater Lett, 59, 3246, 10.1016/j.matlet.2005.05.052 Gao, 2009, Sensing of damage mechanisms in fiber-reinforced composites under cyclic loading using carbon nanotubes, Adv Funct Mater, 19, 123, 10.1002/adfm.200800865 Xia, 2001, Multiscale modeling of failure in metal matrix composites, Acta Mater, 49, 273, 10.1016/S1359-6454(00)00317-7