Damage assessment of composite plate structures with material and measurement uncertainty

D. Brian, Larder helicopter HUM/FDR: benefits and developments, in: Proceedings of the American Helicopter Society 55th Annual Forum, Montreal, Quebec, Canada, 25–27 May, 1999, pp. 1839–1846. J.D. Cronkhite, Practical application of health and usage monitoring (hums) to helicopter rotor, engine and drive system, in: Proceedings of the American Helicopter Society 49th Annual Forum, St. Louis, MO, 19–21 May, 1993, pp. 1445–1455. D.J. Haas, C.G. Schaefer Jr., Emerging technologies for rotor system health monitoring, in: Proceedings of the American Helicopter Society 52nd Annual Forum, vol. 2, Washington DC, 1996, pp. 1717–1731. Aymerich, 2000, Ultrasonic evaluation of matrix damage in impacted composite laminates, Compos. Part B, 31, 1, 10.1016/S1359-8368(99)00067-0 Boller, 2000, Next generation structural health monitoring and its integration into aircraft design, Int. J. Syst. Sci., 31, 1333, 10.1080/00207720050197730 Titurus, 2014, Damage detection using successive parameter subset selection and multiple modal residuals, Mech. Syst. Signal Process., 45, 193, 10.1016/j.ymssp.2013.10.002 Gillich, 2014, Modal identification and damage detection in beam like structures using the power-spectrum and time–frequency analysis, Signal Process., 96, 29, 10.1016/j.sigpro.2013.04.027 Solis, 2013, Continuous wavelet analysis of mode shapes differences for damage detection, Mech. Syst. Signal Process., 40, 645, 10.1016/j.ymssp.2013.06.006 Zang, 2014, A frequency shift curve based damage detection method for cylindrical shell structures, J. Sound Vib., 333, 1671, 10.1016/j.jsv.2013.11.026 Monajemi, 2013, Damage detection in frame structures using damage locating vectors, Measurement, 46, 3541, 10.1016/j.measurement.2013.07.002 Dohler, 2014, Subspace based damage detection under changes in ambient excitation statistics, Mech. Syst. Signal Process., 45, 207, 10.1016/j.ymssp.2013.10.023 Doebling, 1998, A summary review of vibration based damage identification methods, Shock Vib. Dig., 30, 91, 10.1177/058310249803000201 Montalvao, 2006, A review of vibration-based structural health monitoring with special emphasis on composite materials, Shock Vib. Dig., 38, 295, 10.1177/0583102406065898 Salawu, 1997, Detection of structural damage through changes in frequency, Eng. Struct., 19, 718, 10.1016/S0141-0296(96)00149-6 C.R. Farrar, S.W. Doebling, P.J. Cornwell, E.G. Straser, Variability of modal parameters measured on the Alamosa canyon bridge, in: Proceedings of the 15th International Modal Analysis Conference, Orlando, FL, 1997, pp. 257–263. S.W. Doebling, C.R. Farrar, R.S. Goodman, Effects of measurement statistics on the detection of damage in the Alamosa canyon bridge, in: Proceedings of the 15th International Modal Analysis Conference, Orlando, FL, 1997, pp. 919–929. Onkar, 2007, Stochastic finite element buckling analysis of laminated plates with circular cutout under uniaxial compression, J. Appl. Mech., 74, 798, 10.1115/1.2711230 Pawar, 2007, Genetic fuzzy system for online structural health monitoring of composite helicopter rotor blades, Mech. Syst. Signal Process., 21, 2212, 10.1016/j.ymssp.2006.09.006 Zhang, 2013, Vibration based inverse algorithms for detection of delamination in composites, Compos. Struct., 102, 226, 10.1016/j.compstruct.2013.03.012 Ihesiulor, 2014, Delamination detection with error and noise polluted natural frequencies using computational intelligence concepts, Compos. Part B: Eng., 56, 906, 10.1016/j.compositesb.2013.09.032 Yeum, 2012, Instantaneous delamination detection in a composite plate using dual piezoelectric transducer network, Compos. Struct., 94, 3490, 10.1016/j.compstruct.2012.06.003 Xia, 2002, Damage identification of structures with uncertain frequency and mode shape data, Earthq. Eng. Struct. Dyn., 31, 1053, 10.1002/eqe.137 Lopez, 2010, A review of uncertainty in flight vehicle structural damage monitoring, diagnosis and control, Prog. Aerosp. Sci., 46, 247, 10.1016/j.paerosci.2010.03.003 O׳Hagan, 2010, Probability is perfect, but we can׳t elicit it perfectly, Reliab. Eng. Syst. Saf., 85, 239 Collins, 1974, System identification of structures, AIAA J., 12, 185, 10.2514/3.49190 Cheng, 2007, Probabilistic free vibration analysis of beams subjected to axial loads, Adv. Eng. Softw., 38, 31, 10.1016/j.advengsoft.2006.07.004 Melchers, 1999 Haldar, 2000 Hofer, 2002, An approximate epistemic uncertainty analysis approach in the presence of epistemic and aleatory uncertainties, Reliab. Eng. Syst. Saf., 77, 229, 10.1016/S0951-8320(02)00056-X Yong, 2003, Statistical damage identification of structures with frequency changes, J. Sound Vib., 263, 853, 10.1016/S0022-460X(02)01077-5 Bakhary, 2007, Damage detection using artificial neural network with consideration of uncertainties, Eng. Struct., 29, 2806, 10.1016/j.engstruct.2007.01.013 Zadeh, 1996, Fuzzy logic=computing with words, IEEE Trans. Fuzzy Syst., 4, 103, 10.1109/91.493904 Ganguli, 2001, A fuzzy logic system for ground based structural health monitoring of a helicopter rotor using modal data, Intell. Mater. Syst. Struct., 12, 397, 10.1106/104538902022598 Chandrashekhar, 2009, Uncertainty handling in structural damage detection using fuzzy logic and probabilistic simulation, Mech. Syst. Signal Process., 23, 384, 10.1016/j.ymssp.2008.03.013 Chandrashekhar, 2010, Nonlinear vibration analysis of composite laminated and sandwich plates with random material properties, Int. J. Mech. Sci., 52, 874, 10.1016/j.ijmecsci.2010.03.002 Chattopadhyay, 2004, Nonlinear vibration analysis of smart composite structures with discrete delamination using a refined layerwise theory, J. Sound Vib., 273, 387, 10.1016/S0022-460X(03)00561-3 Nayak, 2002, Free vibration analysis of composite sandwich plates based on Reddy׳s higher-order theory, Compos. Part B, 33, 505, 10.1016/S1359-8368(02)00035-5 Chandrashekhar, 2009, Damage assessment of structures with uncertainty by using mode-shape curvatures and fuzzy logic, J. Sound Vib., 326, 937