Cyclic Slip Irreversibilities and the Evolution of Fatigue Damage

W.A.J. Albert: Archive für Mineralogie, Geognosie, Bergbau und Hüttenkunde, 1838, vol. 10, pp. 215–34.

W. Fairbairn: Phil. Trans. R. Soc., 1864, vol. 154, pp. 311–25.

A. Wöhler: Z. Bauwesen, 1870, vol. 20, pp. 73–106.

J. Bauschinger: Mitteilung XV aus dem Mechanisch-technischen Laboratorium der Königlichen Technischen Hochschule in München, 1886, vol. 13, pp. 1–116.

H. Mughrabi: Z. Metallkd., 1986, vol. 77, pp. 703–07.

J.A. Ewing and J.C.W. Humfrey: Phil. Trans. R. Soc., 1903, vol. 200, pp. 241–50.

L.F. Coffin: Trans. ASME, 1954, vol. 76, pp. 931–50.

S.S. Manson: National Advisory Committee on Aerospace Technical Note 2933, National Advisory Committee, Cleveland, OH, 1954.

S. Kocanda: Fatigue Failure of Metals, Sijthoff and Noordhoff International Publishers, Alphen aan den Rijn, The Netherlands, 1978.

M. Klesnil and P. Lukáš: Fatigue of Metallic Materials, Materials Science Monographs, 7, Elsevier Scientific Publishers, New York, NY, 1980.

J. Polák: Cyclic Plasticity and Low Cycle Fatigue Life of Metals, Elsevier, Amsterdam, 1991.

S. Suresh: Fatigue of Materials, 2nd ed., Cambridge University Press, Cambridge, UK, 1998.

D.H. Avery and W.A. Backofen: in Fracture of Solids, D.C. Drucker and J.J. Gilman, eds., Interscience Publishers, New York, NY, 1963, pp. 339–82.

C. Laird and D.J. Duquette: in Corrosion Fatigue, O.J. Devereux, A.J. McEvily, and R.W. Staehle, eds., NACE-2, Houston, TX, 1972, pp. 88–115.

P. Lukáš and M. Klesnil: in Corrosion Fatigue, O.J. Devereux, A.J. McEvily, and R.W. Staehle, eds., NACE-2, Houston, TX, 1972, pp. 118–32.

J.C. Grosskreutz and H. Mughrabi: in Constitutive Equations in Plasticity, A.S. Argon, ed., MIT Press, Cambridge, MA, 1975, pp. 251–326.

C. Laird: in Dislocations in Solids, F.R.N. Nabarro, ed., North-Holland Publishing Company, New York, NY, 1983, vol. 6, pp. 57–120.

P. Neumann: in Physical Metallurgy, R.W. Cahn and P. Haasen, eds., Elsevier Science Publishers B.V., New York, NY, 1983, vol. 2, pp. 1553–93.

L.M. Brown: Ashby Symp.: “The Modelling of Material Behavior and its Relation to Design,” J.D. Embury and A.W. Thompson, eds., TMS, Warrendale, PA, 1990, pp. 175–98.

H. Mughrabi: Proc. 5th Int. Conf. on the Strength of Metals and Alloys, P. Haasen, V. Gerold, and G. Kostorz, eds., Pergamon Press, Oxford, United Kingdom, 1980, vol. 3, pp. 1615–39.

H. Mughrabi: Dislocations and Properties of Real Materials (Conf. Proc.), The Institute of Metals, London, 1984, Book No. 323, pp. 244–60.

Z.S. Basinski and S.J. Basinski: Prog. Mater. Sci., 1992, vol. 36, pp. 89–148.

J. Polák: in Comprehensive Structural Integrity, I. Milne, R.O. Ritchie, and B. Karihaloo, eds., Elsevier, Amsterdam, 2003, vol. 4, pp. 1–39.

M.E. Fine: Metall. Trans. A, 1980, vol. 11A, pp. 365–79.

U. Essmann: Phil. Mag. A, 1982, vol. 45, pp. 171–90.

H. Mughrabi, R. Wang, K. Differt, and U. Essmann: in Fatigue Mechanisms: Advances in Quantitative Measurement of Physical Damage, ASTM STP 811, J. Lankford, D.L. Davidson, W.L. Morris, and R.P. Wei, eds., ASTM, Philadelphia, PA, 1983, pp. 5–45.

H. Mughrabi: Deformation of Multi-Phase and Particle Containing Materials, Proc. 4th Risø Int. Symp. on Metallurgy and Materials Science, J.B. Bilde-Sørensen, N. Hansen, A. Horsewell, T. Leffers, and H. Lilholt, eds., Risø National Laboratory, Roskilde, 1983, pp. 65–82.

K. Differt, U. Essmann, and H. Mughrabi: Phil. Mag. A, 1986, vol. 54, pp. 237–58.

K. Differt, U. Essmann, and H. Mughrabi: Phys. Status Solidi (a), 1987, vol. 104, pp. 95–106.

H. Mughrabi: Fatigue Fract. Eng. Mater. Struct., 1999, vol. 22, pp. 633–41.

H. Mughrabi: Fatigue Fract. Eng. Mater. Struct., 2002, vol. 25, pp. 755–64.

H. Mughrabi: Int. J. Fatigue, 2006, vol. 28, pp. 1501–08.

H. Mughrabi and S. Stanzl-Tschegg: Proc. 4th Int. Conf. on Very High Cycle Fatigue (VHCF-4), J.E. Allison, J. Wayne-Jones, J.M. Larsen, and R.O. Ritchie, TMS, Warrendale, PA, 2007, pp. 75–82.

A. Weidner, D. Amberger, F. Pyczak, B. Schönbauer, S. Stanzl-Tschegg, and H. Mughrabi: Proc. 17th Eur. Conf. on Fracture (ECF 17), CD: ISBN: 978-80-214-3692-3, 2008.

A. Weidner, D. Amberger, F. Pyczak, B. Schönbauer, S. Stanzl-Tschegg, and H. Mughrabi: expanded version of Ref. 34; Int. J. Fatigue, in press.

S.E. Harvey, P.G. Marsh, and W.W. Gerberich: Acta Metall. Mater., 1994, vol. 42, pp. 3493–3502.

W.W. Gerberich, S.E. Harvey, D.E. Kramer, and J.W. Hoehn: Acta Mater., 1998, vol. 46, pp. 5007–21.

D. Khireddine, R. Rahouadj, and M. Clavel: Acta Metall., 1989, vol. 37, pp. 191–201.

L. Cretegny and A. Saxena: Acta Mater., 2001, vol. 49, pp. 3755–65.

M. Risbet, X. Feaugas, C. Guillemer-Neel, and M. Clavel: Scripta Mater., 2003, vol. 49, pp. 533–38.

M. Risbet and X. Feaugas: Eng. Fract. Mech., 2008, vol. 75, pp. 3511–19.

A. Shyam and W.W. Milligan: Acta Mater., 2005, vol. 53, pp. 835–44.

C.E. Feltner and C. Laird: Acta Metall., 1965, vol. 15, pp. 1621–32 and 1633-–53.

V. Gerold and H.P. Karnthaler: Acta Metall., 1989, vol. 37, pp. 2177–83.

Z. Wang: Phil. Mag., 2004, vol. 84, pp. 351–79.

H.J. Gough: 8th Edgar Marburg Lecture of ASTM, Proc. American Society for Testing and Materials, ASTM, Philadelphia, PA, 1933, vol. 33, Part II, pp. 3–114.

N. Thompson, N.J. Wadsworth, and N. Louat: Phil. Mag., 1956, vol. 1, pp. 113–26.

E.E. Laufer and W.N. Roberts: Phil. Mag., 1966, vol. 14, pp. 67–78.

J.D. Atkinson, L.M. Brown, R. Kwadjo, W.M. Stobbs, A.T. Winter, and P.J. Woods: Proc. 3rd Int. Conf. on the Strength of Metals and Alloys (ICSMA 3), Cambridge, United Kingdom, 1973, pp. 402–06.

A.T. Winter: Phil. Mag., 1974, vol. 30, pp. 719–38.

P.J. Woods: Phil. Mag., 1973, vol. 28, pp. 155–91.

J.M. Finney and C. Laird: Phil. Mag., 1975, vol. 31, pp. 339–66.

H. Mughrabi: Mater. Sci. Eng., 1978, vol. 33, pp. 207–23.

H. Mughrabi: Proc. 4th Int. Conf. on Continuum Models of Discrete Systems (CMDS-4), O. Brulin and R.K.T. Hsieh, eds., North-Holland Publishing Company, Amsterdam, 1981, pp. 241–57.

H. Mughrabi, K. Herz, and F. Ackermann: Proc. 4th Int. Conf. on the Strength of Metals and Alloys (ICSMA 4), Laboratoire de Physique, E.N.S.M.I.M., Nancy, France, 1976, vol. 3, pp. 1244–48.

H. Mughrabi, F. Ackermann, and K. Herz: Fatigue Mechanisms, Proc. ASTM-NBS-NSF Symp., ASTM ASTP 675, J.T. Fong, ed., ASTM, Philadelphia, PA, 1979, pp. 69–105.

W.A. Wood: Phil. Mag., 1958, vol. 3, pp. 692–99.

H. Mughrabi, M. Bayerlein, and R. Wang: Proc. 9th Int. Conf. on the Strength of Metals and Alloys (ICSMA 9), D.G. Brandon, R. Chaim, and A. Rosen, eds., Freund Publishing Company Ltd., London, vol. 2, pp. 879–86.

B.T. Ma and C. Laird: Acta Metall., 1989, vol. 37, pp. 325–36.

Z.S. Basinski and S.J. Basinski: Acta Metall., 1989, vol. 37, pp. 3263–73.

J. Polák, J. Man, and K. Obrtlik: Int. J. Fatigue, 2003, vol. 25, pp. 1027–36.

C. Laird: Mater. Sci. Eng., 1976, vol. 22, pp. 231–36.

H. Mughrabi and R. Wang: Deformation of Polycrystals: Mechanisms and Micro-structures, Proc. 2nd Risø Int. Symp. on Metallurgy and Materials Science, N. Hansen, A. Horsewell, T. Leffers, and H. Lilholt, eds., Risø National Laboratory, Roskilde, Denmark, 1981, pp. 87–98.

S. Stanzl-Tschegg and B. Schönbauer: Proc. 4th Int. Conf. on Very High Cycle Fatigue (VHCF-4), J.E. Allison, J. Wayne-Jones, J.M. Larsen, and R.O. Ritchie, eds., TMS, Warrendale, PA, 2007, pp. 15–22.

D.F. Watt, J.D. Embury, and R.K. Ham: Phil. Mag., 1968, vol. 17, pp. 199–203.

S.J. Basinski, Z.S. Basinski, and A. Howie: Phil. Mag., 1969, vol. 19, pp. 889–924.

Z.S. Basinski, R. Pasqual, and S.J. Basinski: Acta Metall., 1983, vol. 31, pp. 591–602.

J.M. Finney and C. Laird: Mater. Sci. Eng., 1982, vol. 54, pp. 137–42.

M. Hollmann, J. Bretschneider, and C. Holste: Cryst. Res. Technol., 2000, vol. 35, pp. 479–92.

C. Holste: Phil. Mag., 2004, vol. 84, pp. 299–315.

A. Weidner, R. Beyer, C. Blochwitz, C. Holste, A. Schwab, and W. Tirschler: Mater. Sci. Eng. A, 2006, vols. 435–436, pp. 540–46.

A. Weidner, J. Man, W. Tirschler, P. Kapetek, C. Blochwitz, J. Polák, and W. Skrotzki: Mater. Sci. Eng. A, 2008, vol. 492, pp. 118–27.

P.J.E. Forsyth: Proc. R. Soc. A, 1957, vol. 242, pp. 198–202.

W.A. Wood, S. McK. Cousland, and K.R. Sargant: Acta Metall., 1963, vol. 11, pp. 643–52.

A.N. May: Nature (London), 1960, vol. 185, pp. 303–04.

D. Hull: J. Inst. Met., 1957–58, vol. 86, pp. 425–30.

A.H. Cottrell and D. Hull: Proc. R. Soc. A, 1957, vol. 242, pp. 211–13.

N.F. Mott: Acta Metall., 1958, vol. 6, pp. 195–97.

A.J. McEvily, Jr. and E.S. Machlin: in Fracture, B.L. Averbach, D.K. Felbeck, G.T. Hahn, and D.A. Thomas, eds., MIT Press and John Wiley, New York, NY, 1959, pp. 450–73.

N. Thompson: in Fracture, B.L. Averbach, D.K. Felbeck, G.T. Hahn, and D.A. Thomas, eds., MIT Press and John Wiley, New York, NY, 1959, pp. 354–74.

D.F. Watt: Phil. Mag., 1966, vol. 14, pp. 87–92.

A.J. Kennedy: Processes of Creep and Fatigue in Metals, Oliver and Boyd, Edinbugh and London, 1963, pp. 331–41.

R.C. Boettner and A.J. McEvily: Acta Metall., 1964, vol. 13, pp. 937–46.

L.M. Brown: Met. Sci., 1977, vol. 11, pp. 315–20.

K. Mecke and C. Blochwitz: Cryst. Res. Technol., 1982, vol. 17, pp. 743–58.

J. Bretschneider, C. Holste, and W. Kleinert: Mater. Sci. Eng. A, 1995, vol. 191, pp. 61–72.

U. Essmann and H. Mughrabi: Phil. Mag. A, 1979, vol. 40, pp. 731–56.

U. Essmann, U. Gösele, and H. Mughrabi: Phil. Mag., 1981, vol. 44, pp. 405–26.

W.A. Backofen: in Fracture, B.L. Averbach, D.K. Felbeck, G.T. Hahn, and D.A. Thomas, eds., MIT Press and John Wiley, New York, NY, 1959, pp. 435–47.

U. Essmann and M. Rapp: Acta Metall., 1973, vol. 21, pp. 1305–17.

J. Polák: Mater. Sci. Eng., 1987, vol. 92, pp. 71–80.

J.G. Antonopoulos, L.M. Brown, and A.T. Winter: Phil. Mag., 1976, vol. 34, pp. 549–63.

I.B. Kwon, M.E. Fine, and J. Weertman: Acta Metall., 1989, vol. 37, pp. 2927–36.

I.B. Kwon, M.E. Fine, and J. Weertman: Acta Metall., 1989, vol. 37, pp. 2937–46.

L.M. Brown: Mater. Sci. Eng. A, 2000, vol. 285, pp. 35–42.

J.C. Figueroa and C. Laird: Mater. Sci. Eng., 1983, vol. 60, pp. 45–58.

G. Dörr and C. Blochwitz: Cryst. Res. Technol., 1987, vol. 22, pp. 113–21.

M. Bayerlein and H. Mughrabi: in Short Fatigue Cracks, ESIS 13, K.J. Miller and E.R. de los Rios, eds., Mechanical Engineering Publications, London, 1992, pp. 55–82.

P. Villechaise, L. Sabatier, and J.C. Girard: Mater. Sci. Eng. A, 2002, vol. 323, pp. 377–85.

P. Villechaise: Proc. ATEM’03, Int. Conf. on Advanced Technology in Experimental Mechanics 2003, JSME No. 03-207, The Japan Society of Mechanical Engineers, Tokyo, Sept. 9, 2003, CD-ROM.

J. Man, K. Obrtlik, C. Blochwitz, and J. Polák: Acta Mater., 2002, vol. 50, pp. 3767–80.

J. Man, K. Obrtlik, and J. Polák: Mater. Sci. Eng. A, 2003, vol. 351, pp. 123–32.

Z.S. Basinski and S.J. Basinski: Proc. 8th Int. Conf. on the Strength of Metals and Alloys (ICSMA 9), P.O. Kettunen, T.K. Lepistö, and M.E. Lehtonen, eds., Pergamon Press, Oxford, United Kingdom, 1988, vol. 1, pp. 13–24.

M.T. Ma and C. Laird: Fatigue Fract. Eng. Mater. Struct., 1986, vol. 9, pp. 109–16.

A. Hunsche and P. Neumann: Acta Metall., 1986, vol. 34, pp. 207–17.

M. Bayerlein and H. Mughrabi: Acta Metall. Mater., 1991, vol. 39, pp. 1645–50.

P. Lukaš, M. Klesnil, and J. Krejči: Phys. Status Solidi, 1968, vol. 27, pp. 545–58.

Proc. 4th Int. Conf. on Very High Cycle Fatigue (VHCF-4), J.E. Allison, J. Wayne-Jones, J.M. Larsen, and R.O. Ritchie, eds., TMS, Warrendale, PA, 2007.

S. Stanzl-Tschegg and B. Schönbauer: Proc. 4th Int. Conf. on Very High Cycle Fatigue (VHCF-4), J.E. Allison, J. Wayne-Jones, J.M. Larsen, and R.O. Ritchie, eds., TMS, Warrendale, PA, 2007, pp. 15–22.

S. Stanzl-Tschegg, B. Schönbauer, and C. Laird: Plasticity, Failure and Fatigue in Structural Materials—from Macro to Nano: Proc. Hael Mughrabi Honorary Symp., K.J. Hsia, M. Göken, T. Pollock, P.D. Portella, and N.R. Moody, eds., TMS, Warrendale, PA, 2008, pp. 229–34.

P. Lukáš and M. Klesnil: Phys. Status Solidi, 1970, vol. 37, pp. 833–42.

P. Lukáš and M. Klesnil: Phys. Status Solidi (a), 1970, vol. 5, pp. 247–58; private communication, Max—Planck-Institut für Metallforschung, Stuttgart, Germany, 1982.

J.K. Lee and C. Laird: Phil. Mag. A, vol. 47, pp. 579–97.

D. Steiner and V. Gerold: Mater. Sci. Eng., 1986, vol. 84, pp. 77–88.

D. Steiner: Doctoral Thesis, University of Stuttgart, Stuttgart, 1982.

M. Clavel and A. Pineau: Mater. Sci. Eng., 1982, vol. 55, pp. 157–71.

P.B. Hirsch: Proc. 1st Int. Conf. on the Strength of Metals and Alloys (ICSMA 1), suppl. to Trans. Jpn. Inst. Met., 1968, vol. 9, pp. XXX–XXXIX.

B. Sesták and A. Seeger: Phys. Status Solidi (b), 1971, pp. 433–44.

H. Mughrabi, K. Herz, and F. Ackermann: Int. J. Fract., 1981, vol. 17, pp. 193–220.

H. Mughrabi, K. Herz, and X. Stark: Acta Metall., 1976, vol. 24, pp. 659–68.

H. Mughrabi and Ch. Wüthrich: Phil. Mag., 1976, vol. 33, pp. 963–84.

F. Ackermann: Doctoral Thesis, University of Stuttgart, Stuttgart, 1982.

V.M. Goritskii, V.S. Ivanova, L.G. Orlov, and V.F. Terent’yev: Sov. Phys.-Dokl., 1973, vol. 17, pp. 776–79.

V.F. Terent’yev, I.S. Kogan, and L.G. Orlov: Fiz. Metall. Metalloved., 1975, vol. 40, pp. 199–202.

C. Sommer and H. Mughrabi: Acta Mater., 1998, vol. 46, pp. 1527–36.

D.V. Wilson and J.K. Tromans: Acta Metall., 1970, vol. 18, pp. 1197–208.

J.T. McGrath and W.J. Bratina: Czech. J. Phys., 1969, vol. B19, pp. 284–93.

K. Pohl, P. Mayr, and E. Macherauch: Scripta Metall., 1980, vol. 14, pp. 1167–69.

H.D. Nine: J. Appl. Phys., 1973, vol. 44, pp. 4875–81.

R. Neumann: Z. Metallkd., 1975, vol. 66, pp. 26–32.

H. Mughrabi: Z. Metallkd., 1975, vol. 66, pp. 719–24.

T. Magnin and J.H. Driver: Mater. Sci. Eng., 1979, vol. 39, pp. 175–85.

T. Magnin and J.H. Driver: in Low-Cycle Fatigue and Life Prediction, C. Amzallag, B.N. Leis and P. Rabbe, eds., ASTM STP 770, ASTM, Philadelphia, PA, 1982, pp. 212–26.