Cutting performance evaluation of modified dielectrics in nano powder mixed electric discharge machining (NPMEDM) of Ni-based super alloy

Avion Alloys, Inconel, (n.d.). 〈https://avionalloys.com/inconel/〉. (Accessed 10 December 2021). Berman, S., n.d. Inconel Alloys | 5 Helpful Facts About Inconel. 〈https://www.ferralloy.com/inconel-alloys-facts/〉. Kewther, 2001, Corrosion properties of Inconel 617 alloy after heat treatment at elevated temperature, Journal of Materials Engineering and Performance, 10, 108, 10.1361/105994901770345420 High Temperature Metals, I.N.C.O.N.E.L. 617 Technical Data, (n.d.). 〈https://www.hightempmetals.com/techdata/hitempInconel617data.php〉. (Accessed 11 December 2021). Li, 2013, Surface integrity characteristics in wire-EDM of Inconel 718 at different discharge energy, Procedia CIRP, 6, 220, 10.1016/j.procir.2013.03.046 Vastrakar, 2019, Optimization of process parameters of EDM of Inconel 617 by Taguchi based PCA and GRA technique and effect of recast layer formation, IJEAT, 9, 1933, 10.35940/ijeat.B2895.129219 Singh, 2022, Application of generalized regression neural network and gaussian process regression for modelling hybrid micro-electric discharge machining: a comparative study, Processes, 10, 755, 10.3390/pr10040755 Dzionk, 2020, Studying the effect of working conditions on WEDM machining performance of super alloy Inconel 617, Machines, 8, 54, 10.3390/machines8030054 Wojciechowski, 2017, The evaluation of surface integrity during machining of Inconel 718 with various laser assistance strategies, MATEC Web of Conferences, 136, 01006, 10.1051/matecconf/201713601006 Jeevamalar, 2015, Die sinking EDM process parameters: a review, International Journal of Mechanical Engineering and Robotics Research, 12 Qudeiri, 2020, Principles and characteristics of different EDM processes in machining tool and die steels, Applied Sciences, 10, 2082, 10.3390/app10062082 Razak, 2015, Improving EDM efficiency with silicon carbide powder-mixed dielectric fluid, International Journal of Materials, Mechanics and Manufacturing, 3, 40, 10.7763/IJMMM.2015.V3.163 Mishra, 2014, Study on electro discharge machining (Edm), IJES, 3, 12 Oßwald, 2017, Experimental investigation of energy distribution in continuous sinking EDM, CIRP Journal of Manufacturing Science and Technology, 19, 36, 10.1016/j.cirpj.2017.04.006 Tripathy, 2016, Multi-attribute optimization of machining process parameters in powder mixed electro-discharge machining using TOPSIS and grey relational analysis, Engineering Science and Technology, an International Journal, 19, 62, 10.1016/j.jestch.2015.07.010 Singh, 2022, Material independent effectiveness of workpiece vibration in μ-EDM drilling, Journal of Materials Research and Technology, 18, 531, 10.1016/j.jmrt.2022.02.063 Singh, A. Kr, Mahajan, R., Tiwari, A., Kumar, D., Ghadai, R.K. 2018. Effect of dielectric on electrical discharge machining: a review. IOP Conference Series: Materials Science and Engineering, 377, 012184. 〈https://doi.org/10.1088/1757-899X/377/1/012184〉. Chakraborty, 2015, A review on the use of dielectric fluids and their effects in electrical discharge machining characteristics, Precision Engineering, 40, 1, 10.1016/j.precisioneng.2014.11.003 Singh, K., Gianender, Agarwal, A.K., Ajit, Yadav, R., n.d. Effect of Dielectric fluids used on EDM Performance: A Review. Sapkale, 2017, Effect of dielectric fluid in EDM: a review, Journal of Advances in Science and Technology, 13, 5 Niamat, 2017, Effect of different dielectrics on material removal rate, electrode wear rate and microstructures in EDM, Procedia CIRP, 60, 2, 10.1016/j.procir.2017.02.023 Aghdeab, S.H., Aldulaimy, H.L., n.d. Study the Effect of Different Dielectric on Material Removal Rate, Electrode Wear Rate and Surface Roughness in EDM Process, IJRSM, p. 8. 〈https://doi.org/10.5281/zenodo.2528760〉. Zaw, 1999, Formation of a new EDM electrode material using sintering techniques, Journal of Materials Processing Technology, 89–90, 182, 10.1016/S0924-0136(99)00054-0 Rahul, 2019, Machinability analysis of Inconel 601, 625, 718 and 825 during electro-discharge machining: on evaluation of optimal parameters setting, Measurement, 137, 382, 10.1016/j.measurement.2019.01.065 Sharma, 2014, Electrical discharge machining of AISI 329 stainless steel using copper and brass rotary tubular electrode, Procedia Materials Science, 5, 1771, 10.1016/j.mspro.2014.07.367 Singh, 2004, Some investigations into the electric discharge machining of hardened tool steel using different electrode materials, Journal of Materials Processing Technology, 149, 272, 10.1016/j.jmatprotec.2003.11.046 Sen, G., Mondal, S.C., 2020. Investigation of the Effect of Copper, Brass and Graphite Electrode on Electrical Discharge Machining of Mild Steel Grade IS2062, Seoul, South Korea, p. 050054. 〈https://doi.org/10.1063/5.0024672〉. Jamadar, M.U.M., Kavade, M.V., n.d. Effect of Aluminium Powder Mixed Edm on Machining Characteristics of Die Steel (AISI D3), IJMPE. Kumar, A., Mandal, A., Dixit, A.R., Das, A.K., n.d. Performance Evaluation of Al2O3 Nano powder Mixed Dielectric for Electric Discharge Machining of Inconel 825. Sarvanakumar, A., Santarao, K., Nandini, G., n.d. Influence of Alumina Nano Powder Mixed Dielectric Fluid in Electric Spark Machining of AISI D3 Steel, IJMPERD. Khan, A.A., Mohiuddin, A.K.M., Latif, M.A.A., n.d. Improvement of MRR and Surface Roughness during Electrical Discharge Machining (EDM) Using Aluminum Oxide Powder Mixed Dielectric Fluid. 〈https://doi.org/10.1088/1757-899X/290/1/012063〉. Lakshmanaswamy, G., Rao, M.S., n.d. Optimization of Silicon Carbide (SiC) Nano Powdered EDM Process of Inconel 625, IJRESM. Gudur, S., Potdar, V., n.d. Effect of Silicon Carbide Powder Mixed EDM on Machining Characteristics of SS 316L Material, IJIRSET. Khan, A.A., Royani, N.N.B.M., Al-Hazza, M.H.F., Daud, M.R.H.C., Mohiuddin, A., n.d. Improvement of Surface Quality Using Silicon Carbide Powder Added Dielectric Fluid During EDM, ICMAAE. 〈https://doi.org/10.1088/1757-899X/184/1/012039〉. Al-Khazraji, A., Amin, S.A., Ali, S.M., n.d. The Effect of SiC Powder Mixing Electrical Discharge Machining on White Layer Thickness, Heat Flux and Fatigue Life of AISI D2 Die Steel. Ali, M.Y., Adesta, E.Y.T., Abdul Rehman, N.A.B., Mohammad Aris, E.B., n.d. Powder Mixed Micro Electro Discharge Milling of Titanium Alloy: Analysis of Surface Roughness, AMR. 〈https://doi.org/10.4028/www.scientific.net/AMR.341-342.142〉. Wu, 2005, Improvement of surface finish on SKD steel using electro-discharge machining with aluminum and surfactant added dielectric, International Journal of Machine Tools and Manufacture, 45, 1195, 10.1016/j.ijmachtools.2004.12.005 Surface-Active Agent (S.A.A.), (n.d.). 〈https://www.corrosionpedia.com/definition/1052/surface-active-agent-saa〉. (Accessed 25 December 2021). Azarmi, 2015, Type and application of some Common surfactants, Journal of Chemical And Pharmaceutical Research, 9 Mancuso, J., n.d. Types of Surfactants. 〈https://ecolink.com/info/types-of-surfactants/〉. Ranjan, 2020, An investigation on surfactant added PMWEDM of Inconel 718, IJAME, 17, 8140, 10.15282/ijame.17.3.2020.07.0611 Hosni, 2018, The influence of span-20 surfactant and micro-/nano-chromium (Cr) powder mixed electrical discharge machining (PMEDM) on the surface characteristics of AISI D2 hardened steel, IOP Conference Series: Materials Science and Engineering, 342, 10.1088/1757-899X/342/1/012095 Razak, 2017, Effect of surfactants and additives on electrical discharge machining of reaction bonded silicon carbide, Surface Science, 12, 6 Fuse, 2021, Integration of fuzzy AHP and fuzzy TOPSIS methods for wire electric discharge machining of titanium (Ti6Al4V) alloy using RSM, Materials, 14, 7408, 10.3390/ma14237408 Mhatre, 2014, Electro discharge machining characteristics of Ti-6Al-4V alloy: a grey relational optimization, Procedia Materials Science, 5, 2014, 10.1016/j.mspro.2014.07.534 Inconel Alloy 617 (UNS N06617), (n.d.). 〈https://super-metals.com/wp-content/uploads/2015/03/Inconel-617.pdf〉. Rajkumar, 2018, Performance Parameters Characteristics of PMEDM: A Review, International Journal of Applied Engineering Research, 13, 10 Tan, P.-C., Yeo, S.-H., Tan, Y.-V., n.d. Effects of Nano Powder Additives in Micro-electrical Discharge Machining. HLB Values of some Surfactants, n.d.. 〈https://pharmcal.tripod.com/ch17.htm〉. Sigma Aldrich, n.d. Material Safety Data Sheet-Tween 20, p. 6. Singaravel, B., Shekar, K.C., Rao, K.M., Reddy, G.G., 2018. Study of Vegetable Oil and their Properties for as an Alternative Source to Mineral Oil-Based Dielectric Fluid in Electric Discharge Machining, 5, p. 8. Holhlein, I.A., n.d. IEC 60296 (Ed. 5) – A Standard for Classification of Mineral Insulating Oil on Performance and Not on the Origin. 〈https://hrcak.srce.hr/file/363648〉. P, 2017, Investigation on the influence of different types of dielectrics in electrical discharge machining, International Journal of Advanced Manufacturing Technology, 92, 277, 10.1007/s00170-017-0039-1 Lv, 2016, Effect of dispersion method on stability and dielectric strength of transformer oil-based TiO2 nanofluids, Nanoscale Research Letters, 11, 515, 10.1186/s11671-016-1738-5 Morán, 2006, Use of grey relational analysis to assess and optimize small biomass boilers, Fuel Processing Technology, 87, 123, 10.1016/j.fuproc.2005.08.008 Rathi, M.G., Mane, D.V., n.d. Study on Effect of Powder Mixed dielectric in EDM of Inconel 718, IJSRP. Bai, 2013, Research on material removal rate of powder mixed near dry electrical discharge machining, International Journal of Advanced Manufacturing Technology, 68, 1757, 10.1007/s00170-013-4973-2 Che Haron, 2008, Copper and graphite electrodes performance in electrical-discharge machining of XW42 tool steel, Journal of Materials Processing Technology, 201, 570, 10.1016/j.jmatprotec.2007.11.285 Sahu, 2019, Comparison of performance of different tool electrodes during electrical discharge machining, Indian Journal of Engineering and Materials Sciences, 14 Kolli, 2015, Effect of dielectric fluid with surfactant and graphite powder on electrical discharge machining of titanium alloy using Taguchi method, Engineering Science and Technology, An International Journal, 18, 524, 10.1016/j.jestch.2015.03.009 Praveen, L., Geeta Krishna, P., Venugopal, L., Prasad, N.E.C., 2018. Effects of pulse ON and OFF time and electrode types on the material removal rate and tool wear rate of the Ti-6Al-4V Alloy using EDM machining with reverse polarity. IOP Conference Series: Materials Science and Engineering, 330, 012083. 〈https://doi.org/10.1088/1757-899X/330/1/012083〉. Aghdeab, D.S.H., 2016. Effect of Pulse on Time and Pulse off Time on Material Removal Rate and Electrode Wear Ratio of Stainless Steel AISI 316L in EDM, p. 11. Mali, H.S., Kumar, N., n.d. Investigating Feasibility of Waste Vegetable Oil for Sustainable EDM, p. 7. Kolli, 2019, Assessing the influence of surfactant and B4C powder mixed in dielectric fluid on EDM of titanium alloy, Silicon, 11, 1731, 10.1007/s12633-017-9701-3 Kolli, 2016, Optimization of the parameters for the surfactant-added EDM of a Ti–6Al–4V alloy using the GRA-Taguchi method, Material in Technology, 50, 229 Karmiris-Obratański, P., Zagórski, K., Papazoglou, E.L., Karkalos, N.E., Markopoulos, A.P., 2021. On machining Ti6Al4V ELI with EDM by using copper and graphite electrodes: a comparison study, IOP Conference Series: Materials Science and Engineering, 1037, 012003. 〈https://doi.org/10.1088/1757-899X/1037/1/012003〉. Ishfaq, 2022, EDM of Ti-6Al-4V under nano-graphene mixed dielectric: a detailed investigation on axial and radial dimensional overcuts, Nanomaterials, 12, 432, 10.3390/nano12030432 Bhaumik, 2018, Effect of different tool materials during EDM performance of titanium grade 6 alloy, Engineering Science and Technology, An International Journal, 21, 507, 10.1016/j.jestch.2018.04.018 Mohanty, 2017, An intelligent approach to optimize the EDM process parameters using utility concept and QPSO algorithm, Engineering Science and Technology, An International Journal, 20, 552, 10.1016/j.jestch.2016.07.003