Custom Morse taper zirconia abutments: Influence on marginal fit and torque loss before and after thermomechanical cycling

Alikhasi, 2013, A comparison of precision of fit, rotational freedom, and torque loss with copy-milled zirconia and prefabricated titanium abutments, Int. J. Oral Maxillofac. Implants, 28, 996, 10.11607/jomi.2937 Andreiotelli, 2009, Fracture Strength of zirconia implants after artificial aging, Clin. Implant Dent. Relat. Res., 11, 158, 10.1111/j.1708-8208.2008.00105.x Belser, 2004, Outcome analysis of implant restorations located in the anterior maxilla: a review of the recent literature, Int. J. Oral Maxillofac. Implants, 19, 30 Beuer, 2009, Precision of fit: zirconia three-unit fixed dental prostheses, Clin. Oral Investig., 13, 343, 10.1007/s00784-008-0224-6 Bickford, 1995 Borba, 2011, Adaptation of all-ceramic fixed partial dentures, Dent. Mater., 27, 1119, 10.1016/j.dental.2011.08.004 Boudrias, 2001, Esthetic option for the implant- supported single-tooth restoration – treatment sequence with a ceramic abutment, J. Can. Dent. Assoc., 67, 508 Bozkaya, 2003, Mechanics of the tapered interference fit dental implants, J. Biomech., 306, 1649, 10.1016/S0021-9290(03)00177-5 Bozkaya, 2005, Mechanics of the taper integrated screwed-in (TIS) abutments used in dental implants, J. Biomech., 38, 87, 10.1016/j.jbiomech.2004.03.006 Demir, 2014, Evaluation of the marginal fit of full ceramic crowns by the microcomputed tomography (micro-CT) technique, Eur. J. Dent., 8, 437, 10.4103/1305-7456.143612 de Paula Silveira, 2017, Marginal and internal fit of CAD-CAM-fabricated composite resina and cerâmica crowns scanner by intraoral cameras, J. Prosthet. Dent., 117, 386, 10.1016/j.prosdent.2016.07.017 Ding, 2003, Evaluation of the ITI Morse-taper implant/abutment design with an internal modification, Int. J. Oral Maxillofac. Implants, 18, 865 Garine, 2007, Measurement of the rotational misfit and implant-abutment gap of allceramic abutments, Int. J. Oral Maxillofac. Implants, 22, 928 Gehrke, 2015, Load fatigue performance of cônica implant-abutment connection: effect of torque level and interface junction, Minerva Stomatol, 64, 1 Hecker, 2003, Cyclic loading of implant-supported prostheses: changes in component fit over time, J. Prosthet. Dent., 89, 346, 10.1067/mpr.2003.71 Jemt, 1991, Failures and complications in 391 consecutively inserted fixed prostheses supported by Branemark implants in edentulous jaws: a study of treatment from the time of prosthesis placement to the first annual checkup, Int. J. Oral Maxillofac. Implants, 6, 270 Jorge, 2013, The role of implant/abutment system on torque maintenance of retention screws and vertical misfit of implant-supported crowns before and after mechanical cycling, Int. J. Oral Maxillofac. Implants, 28, 415, 10.11607/jomi.2727 Kan, 1999, Clinical methods for evaluating implant framework fit, J. Prosthet. Dent., 81, 7, 10.1016/S0022-3913(99)70229-5 Khraisat, 2002, Fatigue resistance of two implant/abutment joint designs, J. Prosthet. Dent., 88, 604, 10.1067/mpr.2002.129384 Kim, 2012, Screw loosening with interchangeable abutments in internally connect implants after cyclic loading, Int. J. Oral Maxillofac. Implants, 27, 42 Koç, 2016, A comparativo study of marginal fit of copings prepared with various techgniques of different implant abutments, Dent. Mater. J., 35, 447, 10.4012/dmj.2015-252 Lopez-Suarez, 2016, Marginal vertical discrepancies of monolithic and veneered zirconia and metal-ceramic three-unit posterior fixed dental prostheses, Int. J. Prosthodont., 29, 256, 10.11607/ijp.4541 McCullagh, 1989 Moris, 2015, Torque loss of different abutment sizes before and after cyclic loading, Int. J. Oral Maxillofac. Implants, 30, 1256, 10.11607/jomi.3868 Mühlemann, 2014, Bendind moments of zirconia and titanium implant abutments supporting all-ceramic crowns after aging, Clin. Oral Implants Res., 25, 74, 10.1111/clr.12192 Norton, 1999, Assessment of cold welding properties of the internal conical interface of two commercially available implant systems, J. Prosthet. Dent., 81, 159, 10.1016/S0022-3913(99)70243-X Paphangkorakit, 1997, The effect of pressure on a maximum incisal bite force in man, Arch. Oral Biol., 42, 11, 10.1016/S0003-9969(96)00106-9 Pasali, 2017, Evaluation of marginal fit of single implant-supported metal cerâmic a crowns prepared by usinag presintered metal blocks, J. Prosthet. Dent. Pelekanos, 2009, Micro-CT evaluation of the marginal fit of different In-Ceram alumina copings, Eur. J. Esthet. Dent., 4, 278 Perriard, 2002, Fatigue resistance of ITI implant-abutment connectors-acomparison of the standard cone with a novel internally keyed design, Clin. Oral Implants Res., 13, 542, 10.1034/j.1600-0501.2002.130515.x Pintinha, 2013, Effect of mechanical loading on the removal torque of different types tapered connection abutments for dental implants, J. Prosthet. Dent., 110, 383, 10.1016/j.prosdent.2013.06.007 Rinke, 2013, Range of indications for translucent zirconia modifications: clinical and technical aspects, Quintessence Int., 44, 557 Sailer, 2009, A systematic review of the performance of ceramic and metal implant abutments supporting fixed implant reconstructions, Clin. Oral Implants Res., 20, 4, 10.1111/j.1600-0501.2009.01787.x Seo, D., Yi, Y., Roh, B., 2009. The Effect of Preparation Design on the Marginal and Internal Gaps in Cerec3 Partial Ceramic Crowns, 37, pp. 374–382. Sundh, 2005, Fracture resistance of yttrium oxide partially-stabilized zirconia all-ceramic bridges after veneering and mechanical fatigue testing, Dent. Mater., 21, 476, 10.1016/j.dental.2004.07.013 Vigolo, 2006, An in vitro evaluation of titanium, zirconia, and alumina procera abutments with hexagonal connection, Int. J. Oral Maxillofac. Implants, 21, 575 Weigl, 2004, New prosthetic restorative features of The Ankylos implant system, J. Oral Implantol., 30, 178, 10.1563/1548-1336(2004)30<178:NPRFOT>2.0.CO;2 Wiscott, 1999, Lack of integration of smooth titanium surfaces: a working hypothesis based on strains generated in the surrounding bone, Clin. Oral Implants Res., 10, 429, 10.1034/j.1600-0501.1999.100601.x Weiss, 2000, Effect of repeated closures and opening torque values in seven abutment-implant systems, J. Prosthet. Dent., 84, 194, 10.1067/mpr.2000.108069 Yildirim, 2003, In vivo fracture resistance of implant-supported all-ceramic restorations, J. Prosthet. Dent., 90, 325, 10.1016/S0022-3913(03)00514-6 Zeger, 1986, Longitudinal data analysis using generalized linear models, Biometrika, 73, 13, 10.1093/biomet/73.1.13