Current ceramic materials and systems with clinical recommendations: A systematic review
Tóm tắt
Từ khóa
Tài liệu tham khảo
Land, 1903, Porcelain dental art: No. II, Dent Cosmos, 45, 615
McLean, 1965, The reinforcement of dental porcelain with ceramic oxides, Br Dent J, 119, 251
Sjogren, 1999, Clinical examination of leucite-reinforced glass-ceramic crowns (Empress) in general practice: a retrospective study, Int J Prosthodont, 12, 122
Christel, 1988, Biomechanical compatibility and design of ceramic implants for orthopedic surgery, Ann N Y Acad Sci, 523, 234, 10.1111/j.1749-6632.1988.tb38516.x
Piwowarczyk, 2005, A clinical report and overview of scientific studies and clinical procedures conducted on the 3M ESPE Lava All-Ceramic System, J Prosthodont, 14, 39, 10.1111/j.1532-849X.2005.00003.x
Raigrodski, 2004, Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literature, J Prosthet Dent, 92, 557, 10.1016/j.prosdent.2004.09.015
Raigrodski, 2004, Contemporary all-ceramic fixed partial dentures: a review, Dent Clin North Am, 48, 531, 10.1016/j.cden.2003.12.008
Devigus, 2004, Shading Vita YZ substructures: influence on value and chroma, part I, Int J Comput Dent, 7, 293
Heffernan, 2002, Relative translucency of six all-ceramic systems. Part I: core materials, J Prosthet Dent, 88, 4, 10.1067/mpr.2002.126794
Fischer, 2002, Fracture toughness of dental ceramics: comparison of bending and indentation method, Dent Mater, 18, 12, 10.1016/S0109-5641(01)00005-7
Edelhoff, 2002, Tooth structure removal associated with various preparation designs for posterior teeth, Int J Periodontics Restorative Dent, 22, 241
Aboushelib, 2005, Microtensile bond strength of different components of core veneered all-ceramic restorations, Dent Mater, 21, 984, 10.1016/j.dental.2005.03.013
Fradeani, 2005, Five-year follow-up with Procera all-ceramic crowns, Quintessence Int, 36, 105
Oden, 1998, Five-year clinical evaluation of Procera AllCeram crowns, J Prosthet Dent, 80, 450, 10.1016/S0022-3913(98)70010-1
Odman, 2001, Procera AllCeram crowns followed for 5 to 10.5 years: a prospective clinical study, Int J Prosthodont, 14, 504
Wolfart, 2005, A preliminary prospective evaluation of all-ceramic crown-retained and inlay-retained fixed partial dentures, Int J Prosthodont, 18, 497
Frankenberger, 2000, Leucite-reinforced glass ceramic inlays and onlays after six years: clinical behavior, Oper Dent, 25, 459
Fradeani, 2002, An 11-year clinical evaluation of leucite-reinforced glass-ceramic crowns: a retrospective study, Quintessence Int, 33, 503
Marquardt, 2006, Survival rates of IPS empress 2 all-ceramic crowns and fixed partial dentures: results of a 5-year prospective clinical study, Quintessence Int, 37, 253
Esquivel-Upshaw, 2004, Clinical performance of a lithia disilicate-based core ceramic for three-unit posterior FPDs, Int J Prosthodont, 17, 469
Bindl, 2002, An up to 5-year clinical evaluation of posterior In-Ceram CAD/CAM core crowns, Int J Prosthodont, 15, 451
McLaren, 2000, Survival of In-Ceram crowns in a private practice: a prospective clinical trial, J Prosthet Dent, 83, 216, 10.1016/S0022-3913(00)80015-3
Vult von Steyern, 2001, Five-year evaluation of posterior all-ceramic three-unit (In-Ceram) FPDs, Int J Prosthodont, 14, 379
Olsson, 2003, A long-term retrospective and clinical follow-up study of In-Ceram Alumina FPDs, Int J Prosthodont, 16, 150
Sorensen, 1998, In-Ceram fixed partial dentures: three-year clinical trial results, J Calif Dent Assoc, 26, 207, 10.1080/19424396.1998.12221659
Fradeani, 2002, Clinical experience with In-Ceram Spinell crowns: 5-year follow-up, Int J Periodontics Restorative Dent, 22, 525
Pallesen, 2000, An 8-year evaluation of sintered ceramic and glass ceramic inlays processed by the Cerec CAD/CAM system, Eur J Oral Sci, 108, 239, 10.1034/j.1600-0722.2000.108003239.x
Otto, 2002, Computer-aided direct ceramic restorations: a 10-year prospective clinical study of Cerec CAD/CAM inlays and onlays, Int J Prosthodont, 15, 122
Malament, 1999, Survival of Dicor glass-ceramic dental restorations over 14 years: Part I. Survival of Dicor complete coverage restorations and effect of internal surface acid etching, tooth position, gender, and age, J Prosthet Dent, 81, 23, 10.1016/S0022-3913(99)70231-3
Kim, 2006, Transverse fracture of brittle bilayers: relevance to failure of all-ceramic dental crowns, J Biomed Mater Res B Appl Biomater, 79, 58, 10.1002/jbm.b.30511
Kosmac, 1999, The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic, Dent Mater, 15, 426, 10.1016/S0109-5641(99)00070-6
Luthardt, 1999, Zirconia-TZP and alumina–advanced technologies for the manufacturing of single crowns, Eur J Prosthodont Restor Dent, 7, 113
Reichel, 2004, Virtual Reality by Cerec inLab Framework, Int J Comput Dent, 7, 85
Kamposiora, 1996, Stress concentration in all-ceramic posterior fixed partial dentures, Quintessence Int, 27, 701
Raigrodski, 2001, The safety and efficacy of anterior ceramic fixed partial dentures: A review of the literature, J Prosthet Dent, 86, 520, 10.1067/mpr.2001.120111
Raigrodski, 2006, The efficacy of posterior three-unit zirconium-oxide-based ceramic fixed partial dental prostheses: a prospective clinical pilot study, J Prosthet Dent, 96, 237, 10.1016/j.prosdent.2006.08.010
Vult von Steyern, 2005, All-ceramic fixed partial dentures designed according to the DC-Zirkon technique. A 2-year clinical study, J Oral Rehabil, 32, 180, 10.1111/j.1365-2842.2004.01437.x
Walton, 2003, An up to 15-year longitudinal study of 515 metal-ceramic FPDs: Part 2. Modes of failure and influence of various clinical characteristics, Int J Prosthodont, 16, 177
Goodacre, 2003, Clinical complications in fixed prosthodontics, J Prosthet Dent, 90, 31, 10.1016/S0022-3913(03)00214-2
Miller, 1977, Framework design in ceramo-metal restorations, Dent Clin North Am, 21, 699, 10.1016/S0011-8532(22)00986-7
Oh, 2000, Strength and microstructure of IPS Empress 2 glass-ceramic after different treatments, Int J Prosthodont, 13, 468
Nakamura, 2002, Fracture resistance of pressable glass-ceramic fixed partial dentures, J Oral Rehabil, 29, 951, 10.1046/j.1365-2842.2002.00929.x
Holand, 2000, A comparison of the microstructure and properties of the IPS Empress 2 and the IPS Empress glass-ceramics, J Biomed Mater Res, 53, 297, 10.1002/1097-4636(2000)53:4<297::AID-JBM3>3.0.CO;2-G
Esquivel-Upshaw, 2001, Resistance to staining, flexural strength, and chemical solubility of core porcelains for all-ceramic crowns, Int J Prosthodont, 14, 284
Tinschert, 2001, Fracture resistance of lithium disilicate-, alumina-, and zirconia-based three-unit fixed partial dentures: a laboratory study, Int J Prosthodont, 14, 231
Raptis, 2006, Optical behavior of current ceramic systems, Int J Periodontics Restorative Dent, 26, 31
Stappert, 2006, Fracture resistance of different partial-coverage ceramic molar restorations: An in vitro investigation, J Am Dent Assoc, 137, 514, 10.14219/jada.archive.2006.0224
Fasbinder, 2002, Restorative material options for CAD/CAM restorations, Compend Contin Educ Dent, 23, 911
Attia, 2004, Influence of cyclic loading and luting agents on the fracture load of two all-ceramic crown systems, J Prosthet Dent, 92, 551, 10.1016/j.prosdent.2004.09.002
Reich, 2004, Generation of functional Cerec 3D occlusal surfaces: a comparison of two production methods relevant in practice, Int J Comput Dent, 7, 229
Bindl, 2003, Fracture load of CAD/CAM-generated slot-inlay FPDs, Int J Prosthodont, 16, 653
Otto, 2004, Computer-aided direct all-ceramic crowns: preliminary 1-year results of a prospective clinical study, Int J Periodontics Restorative Dent, 24, 446, 10.11607/prd.00.0601
Denissen, 2000, Marginal fit and short-term clinical performance of porcelain-veneered CICERO, CEREC, and Procera onlays, J Prosthet Dent, 84, 506, 10.1067/mpr.2000.110258
Reich, 2004, Clinical performance of large, all-ceramic CAD/CAM-generated restorations after three years: a pilot study, J Am Dent Assoc, 135, 605, 10.14219/jada.archive.2004.0248
Attia, 2004, Fracture strength of all-ceramic crowns luted using two bonding methods, J Prosthet Dent, 91, 247, 10.1016/j.prosdent.2003.12.005
Bindl, 2004, Survival rate of mono-ceramic and ceramic-core CAD/CAM-generated anterior crowns over 2-5 years, Eur J Oral Sci, 112, 197, 10.1111/j.1600-0722.2004.00119.x
Reich, 2002, The effect of multicolored machinable ceramics on the esthetics of all-ceramic crowns, J Prosthet Dent, 88, 44, 10.1067/mpr.2002.127534
Kurbad, 2006, Multicolored ceramic blocks as an esthetic solution for anterior restorations, Int J Comput Dent, 9, 69
Fritzsche, 2004, Treatment of a single-tooth gap with a Cerec 3D crown on an implant: A case report, Int J Comput Dent, 7, 199
Sevuk, 2002, Copy-milled all-ceramic restorations: case reports, Quintessence Int, 33, 353
Sevuk, 2002, Fabrication of one-piece all-ceramic coronal post and laminate veneer restoration: a clinical report, J Prosthet Dent, 88, 565, 10.1067/mpr.2002.129376
Chai, 2000, Probability of fracture of all-ceramic crowns, Int J Prosthodont, 13, 420
Chang, 2003, Tensile bond strengths of five luting agents to two CAD-CAM restorative materials and enamel, J Prosthet Dent, 90, 18, 10.1016/S0022-3913(03)00217-8
Malament, 1999, Survival of Dicor glass-ceramic dental restorations over 14 years. Part II: effect of thickness of Dicor material and design of tooth preparation, J Prosthet Dent, 81, 662, 10.1016/S0022-3913(99)70104-6
Haselton, 2000, Clinical assessment of high-strength all-ceramic crowns, J Prosthet Dent, 83, 396, 10.1016/S0022-3913(00)70033-3
Sundh, 2004, A comparison of fracture strength of yttrium-oxide-partially-stabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramics, J Oral Rehabil, 31, 682, 10.1111/j.1365-2842.2004.01284.x
Xiao-ping, 2002, Strength and fracture toughness of MgO-modified glass infiltrated alumina for CAD/CAM, Dent Mater, 18, 216, 10.1016/S0109-5641(01)00026-4
Heffernan, 2002, Relative translucency of six all-ceramic systems. Part II: core and veneer materials, J Prosthet Dent, 88, 10, 10.1067/mpr.2002.126795
Magne, 1997, Esthetic improvements and in vitro testing of In-Ceram Alumina and Spinell ceramic, Int J Prosthodont, 10, 459
Dozic, 2003, The influence of porcelain layer thickness on the final shade of ceramic restorations, J Prosthet Dent, 90, 563, 10.1016/S0022-3913(03)00517-1
De Jager, 2005, The influence of design parameters on the FEA-determined stress distribution in CAD-CAM produced all-ceramic dental crowns, Dent Mater, 21, 242, 10.1016/j.dental.2004.03.013
van der Zel, 2001, The CICERO system for CAD/CAM fabrication of full-ceramic crowns, J Prosthet Dent, 85, 261, 10.1067/mpr.2001.114399
Bindl, 2005, Marginal and internal fit of all-ceramic CAD/CAM crown-copings on chamfer preparations, J Oral Rehabil, 32, 441, 10.1111/j.1365-2842.2005.01446.x
Andersson, 1993, A new all-ceramic crown. A dense-sintered, high-purity alumina coping with porcelain, Acta Odontol Scand, 51, 59, 10.3109/00016359309041149
May, 1998, Precision of fit: the Procera AllCeram crown, J Prosthet Dent, 80, 394, 10.1016/S0022-3913(98)70002-2
Garvie, 1972, Phase analysis in zirconia systems, J Am Ceram Soc, 55, 303, 10.1111/j.1151-2916.1972.tb11290.x
Kohal, 2004, A zirconia implant-crown system: a case report, Int J Periodontics Restorative Dent, 24, 147
Sundh, 2005, Fracture resistance of yttrium oxide partially-stabilized zirconia all-ceramic bridges after veneering and mechanical fatigue testing, Dent Mater, 21, 476, 10.1016/j.dental.2004.07.013
Luthardt, 2002, Reliability and properties of ground Y-TZP-zirconia ceramics, J Dent Res, 81, 487, 10.1177/154405910208100711
Luthardt, 2004, CAD/CAM-machining effects on Y-TZP zirconia, Dent Mater, 20, 655, 10.1016/j.dental.2003.08.007
Tinschert, 2001, Marginal fit of alumina-and zirconia-based fixed partial dentures produced by a CAD/CAM system, Oper Dent, 26, 367
Guazzato, 2004, Strength, reliability and mode of fracture of bilayered porcelain/zirconia (Y-TZP) dental ceramics, Biomaterials, 25, 5045, 10.1016/j.biomaterials.2004.02.036
Addi, 2002, Interface gap size of manually and CAD/CAM-manufactured ceramic inlays/onlays in vitro, J Dent, 30, 53, 10.1016/S0300-5712(01)00059-8
Coli, 2004, Fit of a new pressure-sintered zirconium dioxide coping, Int J Prosthodont, 17, 59
Butz, 2005, Survival rate, fracture strength and failure mode of ceramic implant abutments after chewing simulation, J Oral Rehabil, 32, 838, 10.1111/j.1365-2842.2005.01515.x
Henriksson, 2003, Evaluation of custom-made procera ceramic abutments for single-implant tooth replacement: a prospective 1-year follow-up study, Int J Prosthodont, 16, 626
Priest, 2005, Virtual-designed and computer-milled implant abutments, J Oral Maxillofac Surg, 63, 22, 10.1016/j.joms.2005.05.158
Heydecke, 2002, Evolution and use of aluminum oxide single-tooth implant abutments: a short review and presentation of two cases, Int J Prosthodont, 15, 488
Suarez, 2004, Three-year clinical evaluation of In-Ceram Zirconia posterior FPDs, Int J Prosthodont, 17, 35
Probster, 1996, Four year clinical study of glass-infiltrated, sintered alumina crowns, J Oral Rehabil, 23, 147, 10.1111/j.1365-2842.1996.tb01225.x
Scurria, 1998, Meta-analysis of fixed partial denture survival: prostheses and abutments, J Prosthet Dent, 79, 459, 10.1016/S0022-3913(98)70162-3
Esquivel-Upshaw, 2000, Ceramic design concepts based on stress distribution analysis, Compend Contin Educ Dent, 21, 649
Scherrer, 1993, The fracture resistance of all-ceramic crowns on supporting structures with different elastic moduli, Int J Prosthodont, 6, 462
Meyer, 2003, Ceramic inlays and onlays: clinical procedures for predictable results, J Esthet Restor Dent, 15, 338, 10.1111/j.1708-8240.2003.tb00307.x
Wen, 1999, Comparative mechanical property characterization of 3 all-ceramic core materials, Int J Prosthodont, 12, 534
Lohbauer, 2002, Lifetime prediction of CAD/CAM dental ceramics, J Biomed Mater Res, 63, 780, 10.1002/jbm.10468
Seghi, 1995, Relative fracture toughness and hardness of new dental ceramics, J Prosthet Dent, 74, 145, 10.1016/S0022-3913(05)80177-5
Hwang, 2001, Fracture strength of copy-milled and conventional In-Ceram crowns, J Oral Rehabil, 28, 678, 10.1046/j.1365-2842.2001.00731.x
Guazzato, 2002, Mechanical properties of In-Ceram Alumina and In-Ceram Zirconia, Int J Prosthodont, 15, 339
Chong, 2002, Flexural strength of In-Ceram alumina and In-Ceram zirconia core materials, Int J Prosthodont, 15, 183
Zeng, 1998, Evaluation of mechanical properties of dental ceramic core materials in combination with porcelains, Int J Prosthodont, 11, 183
Wakabayashi, 2000, Crack initiation modes in bilayered alumina/porcelain disks as a function of core/veneer thickness ratio and supporting substrate stiffness, J Dent Res, 79, 1398, 10.1177/00220345000790060801
Proos, 2003, Influence of core thickness on a restored crown of a first premolar using finite element analysis, Int J Prosthodont, 16, 474
Studart, 2007, Mechanical and fracture behavior of veneer-framework composites for all-ceramic dental bridges, Dent Mater, 23, 115, 10.1016/j.dental.2005.12.009
Taskonak, 2005, Residual stresses in bilayer dental ceramics, Biomaterials, 26, 3235, 10.1016/j.biomaterials.2004.08.025
Studart, 2007, Cyclic fatigue in water of veneer-framework composites for all-ceramic dental bridges, Dent Mater, 23, 177, 10.1016/j.dental.2006.01.011
Oh, 2002, Influence of connector design on fracture probability of ceramic fixed-partial dentures, J Dent Res, 81, 623, 10.1177/154405910208100909
Oh, 2002, Effect of connector design on the fracture resistance of all-ceramic fixed partial dentures, J Prosthet Dent, 87, 536, 10.1067/mpr.2002.123850
Oilo, 2003, All-ceramic crowns and preparation characteristics: a mathematic approach, Int J Prosthodont, 16, 301
Pospiech, 1996, All-ceramic resin-bonded bridges. A 3-dimensional finite-element analysis study, Eur J Oral Sci, 104, 390, 10.1111/j.1600-0722.1996.tb00097.x
DeLong, 1983, Development of an artificial oral environment for the testing of dental restoratives: bi-axial force and movement control, J Dent Res, 62, 32, 10.1177/00220345830620010801
Strub, 1998, Fracture strength of 5 different all-ceramic crown systems, Int J Prosthodont, 11, 602
Christensen, 1966, Marginal fit of gold inlay castings, J Prosthet Dent, 16, 297, 10.1016/0022-3913(66)90082-5
McLean, 1971, The estimation of cement film thickness by an in vivo technique, Br Dent J, 131, 107, 10.1038/sj.bdj.4802708
Holmes, 1989, Considerations in measurement of marginal fit, J Prosthet Dent, 62, 405, 10.1016/0022-3913(89)90170-4
Knoernschild, 2000, Periodontal tissue responses after insertion of artificial crowns and fixed partial dentures, J Prosthet Dent, 84, 492, 10.1067/mpr.2000.110262
Martin, 2000, Interface dimensions of CEREC-2 MOD inlays, Dent Mater, 16, 68, 10.1016/S0109-5641(99)00089-5
Reich, 2005, Clinical fit of all-ceramic three-unit fixed partial dentures generated with three different CAD/CAM systems, Eur J Oral Sci, 113, 174, 10.1111/j.1600-0722.2004.00197.x
Lin, 1998, The effect of tooth preparation form on the fit of Procera copings, Int J Prosthodont, 11, 580
Molin, 1993, The fit of gold inlays and three ceramic inlay systems. A clinical and in vitro study, Acta Odontol Scand, 51, 201, 10.3109/00016359309040568
Luthardt, 2004, An innovative method for evaluation of the 3-D internal fit of CAD/CAM crowns fabricated after direct optical versus indirect laser scan digitizing, Int J Prosthodont, 17, 680
Nakamura, 2003, Marginal and internal fit of Cerec 3 CAD/CAM all-ceramic crowns, Int J Prosthodont, 16, 244
Sato, 2002, Relation between cavity design and marginal adaptation in a machine-milled ceramic restorative system, J Oral Rehabil, 29, 24, 10.1046/j.1365-2842.2002.00798.x
Mou, 2002, Influence of different convergence angles and tooth preparation heights on the internal adaptation of Cerec crowns, J Prosthet Dent, 87, 248, 10.1067/mpr.2002.122011
Balkaya, 2005, Influence of firing cycles on the margin distortion of 3 all-ceramic crown systems, J Prosthet Dent, 93, 346, 10.1016/j.prosdent.2005.02.003
Reich, 2005, A comparative study of two CEREC software systems in evaluating manufacturing time and accuracy of restorations, Gen Dent, 53, 195
Boening, 2000, Clinical fit of Procera AllCeram crowns, J Prosthet Dent, 84, 419, 10.1067/mpr.2000.109125
Fleming, 2003, The effect of cement type and mixing on the bi-axial fracture strength of cemented aluminous core porcelain discs, Dent Mater, 19, 69, 10.1016/S0109-5641(02)00006-4
Knobloch, 2000, Fracture toughness of resin-based luting cements, J Prosthet Dent, 83, 204, 10.1016/S0022-3913(00)80013-X
Diaz-Arnold, 1999, Current status of luting agents for fixed prosthodontics, J Prosthet Dent, 81, 135, 10.1016/S0022-3913(99)70240-4
Chen, 1998, Effect of different etching periods on the bond strength of a composite resin to a machinable porcelain, J Dent, 26, 53, 10.1016/S0300-5712(96)00078-4
Kamada, 1998, Effect of ceramic surface treatments on the bond of four resin luting agents to a ceramic material, J Prosthet Dent, 79, 508, 10.1016/S0022-3913(98)70170-2
Ahmad, 2002, Restitution of maxillary anterior aesthetics with all-ceramic components, Int Dent J, 52, 47, 10.1111/j.1875-595X.2002.tb00597.x
Jedynakiewicz, 2001, The effect of surface coating on the bond strength of machinable ceramics, Biomaterials, 22, 749, 10.1016/S0142-9612(00)00294-5
Kern, 1994, Sandblasting and silica coating of a glass-infiltrated alumina ceramic: volume loss, morphology, and changes in the surface composition, J Prosthet Dent, 71, 453, 10.1016/0022-3913(94)90182-1
Bindl, 2005, Survival of ceramic computer-aided design/manufacturing crowns bonded to preparations with reduced macroretention geometry, Int J Prosthodont, 18, 219
Scherrer, 1996, Fracture resistance of human enamel and three all-ceramic crown systems on extracted teeth, Int J Prosthodont, 9, 580
Bindl, 2006, Strength and fracture pattern of monolithic CAD/CAM-generated posterior crowns, Dent Mater, 22, 29, 10.1016/j.dental.2005.02.007
Attia, 2006, Fracture load of composite resin and feldspathic all-ceramic CAD/CAM crowns, J Prosthet Dent, 95, 117, 10.1016/j.prosdent.2005.11.014
Albert, 2004, Marginal adaptation and microleakage of Procera AllCeram crowns with four cements, Int J Prosthodont, 17, 529
Federlin, 2005, Partial ceramic crowns. Influence of preparation design and luting material on margin integrity–a scanning electron microscopic study, Clin Oral Investig, 9, 8, 10.1007/s00784-004-0276-1
Sjogren, 2004, A 10-year prospective evaluation of CAD/CAM-manufactured (Cerec) ceramic inlays cemented with a chemically cured or dual-cured resin composite, Int J Prosthodont, 17, 241
Sjogren, 1998, A 5-year clinical evaluation of ceramic inlays (Cerec) cemented with a dual-cured or chemically cured resin composite luting agent, Acta Odontol Scand, 56, 263, 10.1080/000163598428428
Hasegawa, 1991, Hardening of dual-cured cements under composite resin inlays, J Prosthet Dent, 66, 187, 10.1016/S0022-3913(05)80046-0
Peutzfeldt, 1995, Dual-cure resin cements: in vitro wear and effect of quantity of remaining double bonds, filler volume, and light curing, Acta Odontol Scand, 53, 29, 10.3109/00016359509005941
Lee, 2001, Thermal analysis on the cure speed of dual cured resin cements under porcelain inlays, J Oral Rehabil, 28, 186, 10.1046/j.1365-2842.2001.00639.x
Tanoue, 2003, Properties of dual-curable luting composites polymerized with single and dual curing modes, J Oral Rehabil, 30, 1015, 10.1046/j.1365-2842.2003.01074.x
Shimura, 2005, Influence of curing method and storage condition on microhardness of dual-cure resin cements, Dent Mater J, 24, 70, 10.4012/dmj.24.70
Peumans, 2000, Porcelain veneers: a review of the literature, J Dent, 28, 163, 10.1016/S0300-5712(99)00066-4
Federlin, 2004, Partial ceramic crowns: influence of preparation design and luting material on internal adaptation, Oper Dent, 29, 560
Ferrari, 2001, Bonding of all-porcelain crowns: structural characteristics of the substrate, Dent Mater, 17, 156, 10.1016/S0109-5641(00)00059-2
Ibarra, 2007, Microleakage of porcelain veneer restorations bonded to enamel and dentin with a new self-adhesive resin-based dental cement, Dent Mater, 23, 218, 10.1016/j.dental.2006.01.013
Awliya, 1998, Shear bond strength of a resin cement to densely sintered high-purity alumina with various surface conditions, Acta Odontol Scand, 56, 9, 10.1080/000163598422992
Kern, 1998, Bonding to alumina ceramic in restorative dentistry: clinical results over up to 5 years, J Dent, 26, 245, 10.1016/S0300-5712(97)00009-2
Derand, 2000, Bond strength of luting cements to zirconium oxide ceramics, Int J Prosthodont, 13, 131
Kern, 1998, Bonding to zirconia ceramic: adhesion methods and their durability, Dent Mater, 14, 64, 10.1016/S0109-5641(98)00011-6
Ernst, 2005, In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents, J Prosthet Dent, 93, 551, 10.1016/j.prosdent.2005.04.011
Zhang, 2006, Damage accumulation and fatigue life of particle-abraded ceramics, Int J Prosthodont, 19, 442
Zhang, 2004, Effect of sandblasting on the long-term performance of dental ceramics, J Biomed Mater Res B Appl Biomater, 71, 381, 10.1002/jbm.b.30097
Palacios, 2006, Retention of zirconium oxide ceramic crowns with three types of cement, J Prosthet Dent, 96, 104, 10.1016/j.prosdent.2006.06.001
Herrguth, 2005, The aesthetics of all-ceramic veneered and monolithic CAD/CAM crowns, J Oral Rehabil, 32, 747, 10.1111/j.1365-2842.2005.01498.x
Douglas, 1999, Predicting porcelain thickness required for dental shade matches, J Prosthet Dent, 82, 143, 10.1016/S0022-3913(99)70147-2