Current Sharing Analysis of External Bypass for ITER Poloidal Field Converter
Tóm tắt
The current sharing of bridge arm is very important for the design of external bypass, which provides protection for the ITER poloidal field converter and magnets in fault conditions. Thyristors in parallel should withstand short peak current for each arms. In this paper, the method based on inductance matrix is presented. After theoretical analysis and simulation, the prototype has been manufactured by China industry. The test results on the prototype show that the current sharing performance of the prototype can fully satisfy the design requirement.
Tài liệu tham khảo
P. Fu et al., Review and analysis of ac/dc converter of ITER coil power supply, Proc. 25th Annu. IEEE Appl, Power Electron Conf. Expo., Palm springs, CA, USA. IEEE, New York, 2010
M. Shimada et al., Progress in the ITER physics basis. Nucl Fusion 47, S1–S17 (2007)
E. Gaio, R. Piovan, V. Toigo, I. Benfatto, Bypass operation of the ITER ac/dc converters for reactive power reduction. Fusion Eng 2, 1141–1144 (1998)
J.C. Li et al., Current sharing analysis of arm prototype for ITER PF converter bridge. Plasma Sci Technol 16, 283–287 (2014)
J.C. Li, R&D of TER PF AC/DC Converter Module (University of Chinese Academy of Sciences, Beijing, 2012)
L.J. Wu, Fundamental and Design of High Current Busbars (in Chinese), 1st edn. (China Water & Power Press, Beijing, 1985), pp. 241–300
H. Sheng et al., Design and Application Handbook of Power Electronics Equipments (in Chinese), 1st edn. (China Water & Power Press, Beijing, 1982), pp. 3212–3224