Curing behaviors' characterization of strong and weak crosslinking systems by thermal and dynamic mechanical methods

Zhang, 2012, Synthesis and characterization of transparent and high impact resistance polyurethane coatings based on polyester polyols and isocyanate trimers, Prog. Org. Coating, 75, 579, 10.1016/j.porgcoat.2012.05.005 Zia, 2015, Starch based polyurethanes: a critical review updating recent literature, Carbohydr. Polym., 134, 784, 10.1016/j.carbpol.2015.08.034 Karger-Kocsis, 2013, Ground tyre rubber (GTR) in thermoplastics, thermosets, and rubbers, J. Mater. Sci., 48, 1, 10.1007/s10853-012-6564-2 Shah, 2013, Biodegradation of natural and synthetic rubbers: a review, Int. Biodeterior. Biodegrad., 83, 145, 10.1016/j.ibiod.2013.05.004 Kumar, 2016, Recent development of bio-based epoxy resins: a review, Polym. Plast. Technol. Eng., 57 Yamagishi, 2008, Synthesis and properties of phenolic resins with peculiarly arranged aromatic rings, Fibers, 64, 117 Hoskins, 2011, Cyclic polyesters: synthetic approaches and potential applications, Polym. Chem., 2, 289, 10.1039/C0PY00102C Zuren, 2003 Qiye, 2011 Jian, 2000, The study on properties of dicyanodiamide and modified dicyanodiamide curing epoxy resin, Polym. Mater. Sci. Eng., 16, 115 Hayaty, 2013, Curing behavior of dicyandiamide/epoxy resin system using different accelerators, Iran. Polym. J. (Engl. Ed.), 22, 591, 10.1007/s13726-013-0158-y Jamshidi, 2015, Toughening of dicyandiamide-cured DGEBA-based epoxy resins using flexible diamine, Iran. Polym. J. (Engl. Ed.), 24, 399, 10.1007/s13726-015-0332-5 Ligon, 2015, Toughening of photo-curable polymer networks: a review, Polym. Chem., 7, 257, 10.1039/C5PY01631B Yahyaie, 2013, Toughening mechanisms of rubber modified thin film epoxy resins, Prog. Org. Coating, 76, 286, 10.1016/j.porgcoat.2012.09.016 Kang, 2016, Anhydrides-cured bimodal rubber-like epoxy asphalt composites: from thermosetting to quasi-thermosetting, Polymers, 8, 104, 10.3390/polym8040104 Kang, 2016, Rubber-like quasi-thermosetting polyetheramine-cured epoxy asphalt composites capable of being opened to traffic immediately, Sci. Rep., 6 Musto, 2007, A study by Raman, near-infrared and dynamic-mechanical spectroscopies on the curing behaviour, molecular structure and viscoelastic properties of epoxy/anhydride networks, Polymer, 48, 3703, 10.1016/j.polymer.2007.04.042 Merad, 2009, In-situ monitoring of the curing of epoxy resins by Raman spectroscopy, Polym. Test., 28, 42, 10.1016/j.polymertesting.2008.10.006 Achilias, 2012, Cure kinetics study of two epoxy systems with fourier tranform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC), J. Macromol. Sci. Part A - Chemistry, 49, 630, 10.1080/10601325.2012.696995 Senturia, 1986, Dielectric analysis of thermoset cure, Adv. Polym. Sci., 80, 1, 10.1007/3-540-16423-5_11 Hardis, 2013, Cure kinetics characterization and monitoring of an epoxy resin using DSC, Raman spectroscopy, and DEA, Compos. Appl. Sci. Manuf., 49, 100, 10.1016/j.compositesa.2013.01.021 Mchugh, 2007 Lionetto, 2013, Monitoring the cure state of thermosetting resins by ultrasound, Materials, 6, 3783, 10.3390/ma6093783 Xu, 2016, Phthalonitrile-based resin for advanced composite materials: curing behavior studies, Polym. Test., 55, 38, 10.1016/j.polymertesting.2016.08.008 Hesabi, 2017, Effect of tertiary amine accelerators with different substituents on curing kinetics and reactivity of epoxy/dicyandiamide system, Polym. Test., 59, 344, 10.1016/j.polymertesting.2017.02.023 McHugh, 2010, Determination and review of specific heat capacity measurements during isothermal cure of an epoxy using TM-DSC and standard DSC techniques, Polym. Test., 29, 759, 10.1016/j.polymertesting.2010.04.004 Garschke, 2013, Cure kinetics and viscosity modelling of a high-performance epoxy resin film, Polym. Test., 32, 150, 10.1016/j.polymertesting.2012.09.011 Trappe, 2012, Correlation between crack propagation rate and cure process of epoxy resins, Polym. Test., 31, 654, 10.1016/j.polymertesting.2012.03.007 Stark, 2009, Online monitoring of thermoset post-curing by dynamic mechanical thermal analysis DMTA, Polym. Test., 28, 561, 10.1016/j.polymertesting.2009.02.005 Auad, 2010, Rheological study of the curing kinetics of epoxy–phenol novolac resin, J. Appl. Polym. Sci., 102, 4430, 10.1002/app.24674 Stark, 2011, Investigation of ethylene/vinyl acetate copolymer (EVA) by thermal analysis DSC and DMA, Polym. Test., 30, 236, 10.1016/j.polymertesting.2010.12.003 Kister, 2015, Cure monitoring of CFRP composites by dynamic mechanical analyser, Polym. Test., 47, 71, 10.1016/j.polymertesting.2015.08.009 Flory, 1953, Principles of polymer chemistry: Paul, J. Flory, 353 Lu, 1999, Effect of filler on cure behavior of an epoxy system: cure modeling, Polym. Eng. Sci., 39, 274, 10.1002/pen.11414 Lu, 1998, The macrokinetic model of thermosetting polymers by phase-change theory, Mater. Chem. Phys., 56, 193, 10.1016/S0254-0584(98)00173-4 Kim, 1998, The isothermal cure kinetic of epoxy/amine system analyzed by phase change theory, Polym. J., 30, 90, 10.1295/polymj.30.90 Liu, 2015, Crystallization kinetics of a thermotropic liquid crystalline polyimide derived from 1,3-bis[4-(4'-aminophenoxy) cumyl] benzene, J. Polym. Sci. B Polym. Phys., 36, 1679, 10.1002/(SICI)1099-0488(19980730)36:10<1679::AID-POLB9>3.0.CO;2-K Petrowsky, 2010, Salt concentration dependence of the compensated Arrhenius equation for alcohol-based electrolytes, Electrochim. Acta, 55, 1285, 10.1016/j.electacta.2009.06.008