Cross bore configuration and size effects on the stress distribution in thick-walled cylinders

Fong, 1975, Statistical aspects of fatigue at microstructure, specimen and component levels, 675, 729 Masu, 1992, Fatigue strength of thick-walled cylinders containing cross bores with blending features, Journal of Mechanical Engineering Science, 206, 299, 10.1243/PIME_PROC_1992_206_132_02 Faupel, 1957, Stress concentrations in heavy walled cylindrical pressure vessels: effect of clliptic and circular sideholes, Journal of Industrial and Engineering Chemistry, 49, 1979, 10.1021/ie50576a029 Cole, 1976, Strength of cylinders containing radial or offset cross bores, Journal of Mechanical Engineering Science, 18, 279, 10.1243/JMES_JOUR_1976_018_045_02 Masu, 1994, Plastic analysis and cross bore size effects on the fatigue strength of thick walled cylinders, East African Journal of Engineering, 1, 22 Gerdeen, 1972, Experimental determination of stress concentration factors in thick walled cylinders with cross holes and side holes, Experimental Mechanics, 12, 503, 10.1007/BF02320753 Ficenec, 1976, Fatigue tests on specimens containing Skew holes, Journal of Mechanical Engineering Science, 18, 287, 10.1243/JMES_JOUR_1976_018_046_02 Masu, 1994, Stress and fatigue behaviour model for a pressure vessel containing a cross bore, East African Journal of Engineering, 1, 7 Iwadate, 1981, Safety analysis at a cross bore corner of high pressure polyethylene reactors, Pressure Vessel and Piping Division, Transactions of ASME, 48, 117 Tan, 1986, Stress distributions in thick-walled cylinders due to the introduction of a cross-bore after autofrettage, Journal of Strain Analysis, 21, 177, 10.1243/03093247V213177 Tafreshi, 1995, Numerical analysis of stresses at oblique holes in plates subjected to tension and bending, Journal of Strain Analysis, 30, 317, 10.1243/03093247V304317 Salama, 1996, Stress concentration factors at an elliptical hole on the interface between bonded dissimilar half-planes under bending moment, Journal of Applied Mechanics, 63, 7, 10.1115/1.2787213 Pierce, 1973, Stresses around elliptic holes in circular cylindrical shells, 369 Moriya, 1984, Finite element analysis of stress concentrations around elliptic holes, fillets and cracks in plates under stretching and out-of-plane bending, Bulletin of Japanese Society of Mechanical Engineers, 27, 2611, 10.1299/jsme1958.27.2611 Hanus, 1981, Stress concentration factors for elliptical holes near an edge, Experimental Mechanics, 21, 336, 10.1007/BF02326233 Ellyin, 1973, Elastic stress near a skewed hole in a flat plate and applications to oblique nozzle attachments in shells, Water Research Council Bulletin, 153, 32 Shivakumar, 1992, Stress concentration equations for straight-shank and counter-sunk holes in plates, in tension, bending and pin loads, NASA TP-3192 Fenner, 1985, On the use of elliptical side branches to thick-walled cylinders, International Journal of Pressure Vessel & Piping, 20, 139, 10.1016/0308-0161(85)90073-0 FEA Ltd, 1995 Stasa, 1985 Strang, 1973 Masu, 1989, The effect of cross bore geometry on the strength of pressure vessels Ficenec, 1972, The influence of cross bores on the bursting strength of high pressure containers Peterson, 1974, 297