Cross-Laminated Timber in the USA: Opportunity for Hardwoods?

ANSI, ANSI/APA PRG 320–2012: Standard for Performance-Rated Cross-Laminated Timber. 2012, Am Nat Standards Instit 29.

Evans, L. Cross laminated timber: taking wood buildings to the next level. Continuing Education Center 2013 [cited 2014; Available from: http://continuingeducation.construction.com/article.php?L=312&C=1138 .

Crespell, P. and S. Gagnon, Cross-laminated timber: a primer. 2011, FPInnovations: Vancouver, B.C. Canada.

Rizzo, M.J., Test report: fire tests of building construction and materials—cross-laminated timber and gypsum board wall assembly (load-bearing). 2012, American Wood Council: Buffalo, NY p 53.

Quenneville P, Morris H. Japan Kobe earthquake shake table simulation—the earthquake performance of multi-storey cross laminated timber buildings. New Zealand Timber Design Journal. 2007;15(4):3–8.

Ceccotti A, Sandhaas C, Okabe M, Yasumura M, Minowa C, Kawai N. SOFIE project—3D shaking table test on a seven-storey full-scale cross-laminated timber building. Earthquake Eng Struct Dyn. 2013;42(13):2003–21. https://doi.org/10.1002/eqe.2309 .

Wilson, J.B., et al., eds. Special issue: the environmental performance of renewable building materials in the context of residential construction CORRIM. Vol. 37. 2005, Soc Wood Sci Technol 155.

CORRIM. The Consortium for Research on Renewable Industrial Materials. 2010 [cited 2010 October 19]; Available from: http://www.corrim.org/ .

Hubbard SS, Bowe SA. A gate-to-gate life-cycle inventory of solid hardwood flooring in the eastern US. Wood Fiber Sci. 2010;42(Special Issue):79–89.

Lippke B, et al. CORRIM: life-cycle environmental performance of renewable building materials. For Prod J. 2004;54(6):8.

Alter, L., No timber towers happening in America as concrete industry blocks tall wood from International Building Code, in Tree Hugger. 2015, Narrative Content Group.

AISC, Caveat Emptor: sustainability, wood and the environment. 2016, American Instit Steel Construction p 8.

Concrete News. Concrete interests ensure code provisions for taller wood buildings hit brick wall, in Concrete Products. Denver, CO: SEMCO Publishing; 2015.

Havel, G., Construction concerns: connecting cross-laminated timber, in Fire Engineereing. 2016, PennWell: fair Lawn, NJ.

Chen, Y., Comparison of environmental performance of a five-storey building built with cross-laminated timber and concrete, in Sustainable Building Science Program. 2012, University of British Columbia - Department of Wood Science: Vancouver, B.C., Canada. p. 31.

Durlinger, B., E. Crossin, and J. Wong, Life cycle assessment of a cross laminated timber building, in Market Access. 2013, Forest & wood products Australia: Melbourne, Australia p 112.

John S, et al. Environmental empacts of multi-storey buildings using different construction materials. Christchurch, New Zealand: University of Canterbury - Department of Civil and Natural Resources Engineering; 2008. p. 197.

Robertson AB. A comparative life cycle assessment of mid-rise office building construction alternatives: laminated timber or reinforced concrete in forestry. BC, Canada: The University of British Columbia: Vancouver; 2011. p. 173.

Plackner H. Potenzial ist riesig. Dubrovnik: Holzkurier; 2015. p. 14.

Espinoza, O., et al., Status of cross-laminated timber in North America, in Proceedings of the World Conference on Timber Engineering (WCTE 2016), August 22–25, 2016, J. Eberhardsteiner, et al., Editors. 2016, Vienna University of Technology: Vienna, Austria. p. 6.

FAO, State of the world’s forests 2011, F.a.A.O.o.t.U. Nations, Editor. 2011, Food and Agriculture Organization of the United Nations: Rome, Italy p 179.

Simmon, R. Where the trees are. NASA Earth Observatory map 2011 [cited 2017 April 15]; Available from: https://visibleearth.nasa.gov/view.php?id=76697 .

Forest Products Laboratory. Forest products laboratory research program on small-diameter material. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory; 2000. p. 31.

Krist– FJ Jr, et al. 2013–2027 National insect and disease forest risk assessment. Fort Collins, CO: United States Department of Agriculture, Forest Service, Forest Health Technology Enterprise Team; 2014. p. 209.

US Forest Service. Forests Health Update 2009. Washington, D.C: United States Department of Agriculture, Forest Service, Forest Health Protection; 2009. p. 20.

Herms DA, McCullough DG. Emerald ash borer invasion of North America: history, biology, ecology, impacts, and management. Annu Rev Entomol. 2014;59(1):13–30. https://doi.org/10.1146/annurev-ento-011613-162051 .

www.emeraldashborer.info . Emerald Ash Borer. 2014 [cited 2014 February 1st]; Available from: http://www.emeraldashborer.info/index.cfm#sthash.recyIXwI.dpbs .

Forintek. Properties of lumber with beetle-transmitted bluestain. BC, Canada: Forintek Canada Corp.: Vancouver; 2003. p. 4.

Uyema, M.V., Effects of mountain pine beetle on mechanical properties of Lodgepole pine and Engelmann spruce, in Department of Civil and Environmental Engineering. 2012, Brigham Young University.

Buehlmann U, et al. Assessing the impacts of global competition on the Appalachian hardwood industry. For Prod J. 2007;57(3):5.

Woodall CW, Ince PJ, Skog KE, Aguilar FX, Keegan CE, Sorenson CB, et al. An overview of the Forest products sector downturn in the United States. For Prod J. 2011;61(8):595–603. https://doi.org/10.13073/0015-7473-61.8.595 .

Wardell C. Manufactured alternatives help decking options surge, in ProSales. Washington, DC: Hanley Wood Media, Inc.; 2016.

US Census Bureau, Primary type of exterior wall material of new single-family houses completed, exwallmat.pdf, Editor. 2017, U.S. Department of Commerce: Washington, DC.

Levan-Green SL, Livingston J. Exploring the uses for small-diameter trees. For Prod J. 2001;51(9):10.

Brandner, R. Production and technology of cross laminated timber (CLT): a state-of-the-art report. in European Conference on Cross Laminated Timber (CLT). 2013. Graz university of technology, Austria: The University of Bath.

Jeitler, G., M. Augustin, and G. Schickhofer, Mechanical properties of glued laminated timber and cross laminated timber produced with the wood species birch, in Proceedings of the World Conference on Timber Engineering (WCTE 2016). August 22–25, 2016, J. Eberhardsteiner, et al., Editors. 2016, Vienna University of Technology, Austria: Vienna, Austria. p. 8.

• Franke, S., Mechanical properties of beech CLT, in Proceedings of the World Conference on Timber Engineering (WCTE 2016). August 22–25, 2016, J. Eberhardsteiner, et al., Editors. 2016, Vienna University of Technology, Austria: Vienna, Austria. p. 7. This paper provides a discussion of the major issues using a hardwood (beech) for CLT manufacturing, including a complete explanation of mechanical properties testing, including stress profiles, failure modes, and formulas.

Hovanec D. Effect of wood characteristics on adhesive bond quality of yellow-poplar for use in cross-laminated timbers, in Forestry and Natural Resources. Morgantown, West Virginia: West Virginia university; 2015. p. 98.

Mohamadzadeh M, Hindman D. Mechanical performance of yellow-poplar cross laminated timber. Blacksburg, VA: Virginia Polytechnic Institute and State University, Department of Civil and Environmental Engineering; 2015. p. 34.

Kramer A, Barbosa A, Sinha A. Viability of hybrid poplar in ANSI approved cross-laminated timber applications. J Mater Civ Eng. 2014;26(7):06014009–1 to 5. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000936 .

Brandner R, Flatscher G, Ringhofer A, Schickhofer G, Thiel A. Cross laminated timber (CLT): overview and development. Eur J Wood and Wood Prod. 2016;74(3):331–51. https://doi.org/10.1007/s00107-015-0999-5 .

Tratzmiller M. Hochwertiges Brettsperrholz aus starkem Stammholz. Eur J Wood and Wood Prod. 2010;68(1):21–6. https://doi.org/10.1007/s00107-009-0393-2 .

Schelhaas M-J, Nabuurs GJ, Hengeveld G, Reyer C, Hanewinkel M, Zimmermann NE, et al. Alternative forest management strategies to account for climate change-induced productivity and species suitability changes in Europe. Reg Environ Chang. 2015;15(8):1581–94. https://doi.org/10.1007/s10113-015-0788-z .

Essoua-Essoua, G.G. and P. Blanchet, Cross laminated timber made from large-leaf beech: production, characterization and testing, in 6th International Scientific Conference on Hardwood Processing 2017. September 25–28, 2017, V. Möttönen and E. Heinonen, Editors. 2017, Natural Resources Institute Finland (Luke): Lahti, Finland p 179-183.

•• Thomas, R.E. and U. Buehlmann, Using low-grade hardwoods for CLT production: a yield analysis, in 6th International Scientific Conference on Hardwood Processing 2017. September 25–28, 2017, V. Möttönen and E. Heinonen, Editors. 2017, Natural Resources Institute Finland (Luke): Lahti, Finland. p. 199–206. This paper looks into an issue that has not received enough attention and one that is critical for hardwood CLT’s feasibility: the yield-recovery potential for low-grade hardwoods as a raw material for CLT manufacturing.

• Callegari G, et al. The production of hardwood X-Lam panels to valorise the forest-wood chain in Piemonte (Italy), in 2010 World Conference on Timber Engineering ( WCTE ). Italy: Riva del Garda; 2010. p. 6. This paper describes one of the first studies carried out on the feasibility of hardwood CLT. The motivations discussed by the authors are common to most studies on this topic: a desire to find high value-added uses for underutilized or low value hardwood material.

Hasslacher Norica Timber. Cross laminated timber. 2017 [cited 2017 October 19]; Available from: https://www.hasslacher.com/cross-laminated-timber .

Thompson, H., Visionaries 2017: Mark Adams, managing director of Vitsoe, in The Telegraph. 2017, Telegraph Media Group.

Waugh A. The future of mass timber buildings, in 2017 Mass Timber Conference. Portland, Oregon: Forest Business Network; 2017.

Brindley, C., First U.S. hardwood CLT poject in development, in Pallet Enterprise. 2017, Industrial Reporting Inc.

AHEC. American Hardwood Export Council (AHEC). 2016 [cited 2016 April 12]; Available from: https://www.ahec.org/ .

Slavid, R., Endless Stair, B. Cobden-Ramsay, Editor. 2013, American Hardwood Export Council (AHEC). p. 28.

AHEC, Life cycle assessment of Endless stair. 2013, American Hardwood Export Council (AHEC). p. 21.

AHEC. The American Hardwood Export Council presents ‘The Smile’ by architect Alison Brooks for the London Design Festival. 2016 [cited 2017 March 13]; Available from: http://americanhardwood.org/news-events/release/?tx_ttnews%5Btt_news%5D=1134&cHash=b2247a12635d4cc322ccf44fafb62b63 .

Anonymous. Exhibit Columbus: IKD Conversation Plinth. 2017 [cited 2017 November 7, 2017]; Available from: https://exhibitcolumbus.org/exhibition/conversation-plinth .

Liao Y, Tu D, Zhou J, Zhou H, Yun H, Gu J, et al. Feasibility of manufacturing cross-laminated timber using fast-grown small diameter eucalyptus lumbers. Constr Build Mater. 2017;132:508–15. https://doi.org/10.1016/j.conbuildmat.2016.12.027 .

Aicher, S., M. Hirsch, and Z. Christian, Hybrid beech and spruce cross-laminated Timber, in Proceedings of the World Conference on Timber Engineering (WCTE 2016). August 22–25, 2016, J. Eberhardsteiner, et al., Editors. 2016, Vienna university of technology, Austria: Vienna, Austria p 9.

Näher, T., B. NeubauerLetsch, and A. Müller, Grundlagen zum Marktpotential für verklebte Laubholzprodukte mit Fokus Buchen-Brettschichtholz, in Institut für Holzbau, Tragwerke und Architektur. 2015, Bern University of Applied Sciences: Bern, Switzerland p 67.

Zöllig, S., Bedürfnisse aus der Praxis - Flachdecken mit grossem Stützenraster. 2013, Holzbautag Biel.

Beagley, K.S.M., et al., Investigation of hardwood cross-laminated timber design, in Proceedings of the World Conference on Timber Engineering (WCTE 2014). August 10–14, 2014. 2014: Quebec City, Canada. p. 8.

Grandmont, J.-F. and B. Wang, Composite cross laminated timber (CCLT) made with engineered wood products (EWP) and hardwood, in Proceedings of the World Conference on Timber Engineering (WCTE 2016). August 22–25, 2016, J. Eberhardsteiner, et al., Editors. 2016, Vienna university of technology, Austria: Vienna, Austria. p. 8.

Van-deKuilen JW, Torno S. Untersuchungen zur Bereitstellung von Lamellen aus Buchen- und Eschenholz für die Produktion von Brettschichtholz. Munich, Germany: Technical university Munich; 2014. p. 46.

Marko G, Bejo L, Takats P. Cross-laminated timber made of Hungarian raw materials. IOP Conference Series: Mat Sci Eng. 2016;123(1):012059. https://doi.org/10.1088/1757-899X/123/1/012059 .

CSA, O177-06. Qualification code for manufacturers of structural glued-laminated timber. Mississauga, Can Underwrit: Canadian Standards Association; R2015, 2015.

Forest Products Laboratory, Wood handbook—wood as an engineering material. General Technical Report FPL–GTR–190. 2010, Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 508.

Simpson WT, Hart CA. Estimates of air drying times for several hardwoods and softwoods. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory; 2000. p. 73.

Simpson, W.T., Dry kiln operator’s manual, ed. W.T. Simpson. 1991, Madison, Wis: U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory.

Rice RW, Erich MS. Estimated VOC losses during the drying of six eastern hardwood species. For Prod J. 2006;56(10):48–51.

Milota M, Mosher P. Emissions of hazardous air pollutants from lumber drying. For Prod J. 2008;58(7/8):50–5.

Anderson, R., A CLT manufacturing plant: if you build it will the lumber come?, in Massive Timber Conference. 2016, Forest Business Network: Portland, OR.

Espinoza O, Bond B, Buehlmann U. Energy and the US hardwood industry—part 1: profile and impact of prices. Bioresources. 2011;6(4):3883–98.

Martins, C., A.M.P.G. Dias, and H. Cruz, Glulam made by poplar: delamination and shear strength tests, in 6th International Scientific Conference on Hardwood Processing 2017. September 25–28, 2017, V. Möttönen and E. Heinonen, Editors. 2017, Natural Resources Institute Finland (Luke): Lahti, Finland. p. 191-198.

Lawrence, A.C., J. Lauppe, and T. Snelson, Three steps to make timber a standard material for multi-storey buildings, in World Conference on Timber Engineering (WCTE 2016), J. Eberhardsteiner, et al., Editors. 2016, Vienna University of Technology: Vienna, Austria. August 22–25, 2016. p. 9.

Leibundgut, W., Advances in hardwood CLT, O. Espinoza, Editor. 2016.

Random Lengths Publications. Random Lengths Weekly Report. Random Lengths. 2016;72(36):12.

Hardwood Market Report, Hardwood Market Report Hardwood Market Report, 2016. 31(50).

Bureau of Labor Statistics, Producer price index-commodities—lumber and wood products. 2017.