Critical appraisal and systematic review of 3D & 4D printing in sustainable and environment-friendly smart manufacturing technologies

Mohd, 2021, Impact of 3D printing on the environment: a literature-based study, Sustain. Operat. Comput., 2, 57, 10.1016/j.susoc.2021.04.001 Ruiz-Morales, 2017, Three-dimensional printing of components and functional devices for energy and environmental applications, Energy Environ. Sci., 10, 846, 10.1039/C6EE03526D Jakus, 2018, 3D-printing porosity: a new approach to creating elevated porosity materials and structures, Acta Biomater., 72, 94, 10.1016/j.actbio.2018.03.039 Borges, 2017, Use of 3D printing for biofuel production: efficient catalyst for sustainable biodiesel production from wastes, clean, Techn. Environ. Policy, 1 Dan, 2022, Active printed materials for complex self-evolving deformations, Sci. Rep., 4, 7422 Aamir, 2021, 4D printing: fundamentals, materials, applications and challenges, Polymer., 228 Yang, 2017, 3D printing of liquid crystal elastomeric actuators with spatially programed Nematic, Order Sci., 29, 1701627 Kuksenok, 2016, Stimuli-responsive behavior of composites integrating thermo-responsive gels with photo-responsive fibers, Mater. Horiz., 3, 53, 10.1039/C5MH00212E Gladman, 2016, Biomimetic 4D printing, Nat. Mater., 15, 413, 10.1038/nmat4544 Kumar, 2020, Evaluation in 4D printing –a review, Mater. Today Proc. Nadgorny, 2016, Three-dimensional printing of pH-responsive and functional polymers on an affordable desktop printer, ACS Appl. Mater. Interfaces, 8, 28946, 10.1021/acsami.6b07388 Stewart, 2020 Dockrill Nikita, 2013, 3D and 4D printing: a review on current developments and pharmaceuticals applications, J. Chem. Pharm. Res., 13 Zhongboyu, 2022, Balancing the customization and standardization: exploration and layout surrounding the regulation of the growing field of 3D-printed medical devices in China, Bio-Design Manufact., 1 European Commission, 2020, 40562 Oladapo, 2021, Review on 3D printing: fight against COVID-19, Mater. Chem. Phys., 258, 123, 10.1016/j.matchemphys.2020.123943 Rosser, 2018, Surgical and medical applications of drones: a comprehensive review, J. Soc. Laparoendosc. Surg., 22, 10.4293/JSLS.2018.00018 Oladapo, 2020, Review on 3D printing: fight against COVID-19, Mater. Chem. Phys. Bufngton, 2019, Enzymatically triggered shape memory polymers, Acta Biomater., 84, 88, 10.1016/j.actbio.2018.11.031 Momeni, 2017, A review of 4D printing, Mater. Des., 122, 42, 10.1016/j.matdes.2017.02.068 Thabiso, 2014, The impact and application of 3-D printing technology, Int. J. Sci. Res., 2148 Akhilesh, 2021, Additive manufacturing technology of polymeric materials for customized products: recent developments and future prospective, RSC Adv., 11, 36398, 10.1039/D1RA04060J Dong, 2018, A general strategy of 3D printing thermosets for diverse applications, Mater. Horiz., 1 Fatima, 2021, Exploring the significant applications of internet of things (IoT) with 3D printing using advanced materials in medical field, Mater. Today Proc., 45, 4844, 10.1016/j.matpr.2021.01.305 Shahrubudin, 2019, An overview of 3D printing technology: technological, materials, and applications, 35, 1286 Ramya, 2016, 3D printing technologies in various applications, Int. J. Mech. Eng. Technol., 7, 396 Haresh, 2021, Shape memory polymer nanocomposite: a review on structure–property relationship, Polym. Bull. Lendlein, 2002, Biodegradable, elastic shape-memory polymers for potential biomedical applications, Science, 296, 1673, 10.1126/science.1066102 Dong, 2013, Redox- and glucose-induced shape-memory polymers, Macromol. Rapid Commun., 34, 867, 10.1002/marc.201300084 Ning, 2018, Electroactive polymers for tissue regeneration: developments and perspectives, Prog. Polym. Sci., 81, 144, 10.1016/j.progpolymsci.2018.01.001 Tamay, 2019, 3D and 4D printing of polymers for tissue engineering applications, Front. Bioeng. Biotechnol., 10.3389/fbioe.2019.00164 Jiang, 2020, Achieving better connections between deposited lines in additive manufacturing via machine learning, Math. Biosci. Eng., 17, 3382, 10.3934/mbe.2020191 Vancouver, 2022, 4D printing market size to reach USD 1,971.4 million in 2030 rising demand for innovation in 3D, Print. Appl., 4 Zhu, 2019, Extrusion-based 3D printing of food pastes: correlating rheological properties with printing behaviour, Innov. Food Sci. Emerg. Technol., 58, 02214, 10.1016/j.ifset.2019.102214 Park, 2020, Callus-based 3D printing for food exemplified with carrot tissues and its potential for innovative food production, J. Food Eng., 271, 109, 10.1016/j.jfoodeng.2019.109781 Cui, 2021, Opportunities and challenges of three-dimensional printing technology in pharmaceutical formulation development, Acta Pharm. Sin. B, 11, 2488, 10.1016/j.apsb.2021.03.015 Hsueh, 2021, Effects of printing temperature and filling percentage on the mechanical behavior of fused deposition molding technology components for 3D printing, Polymers (Basel), 13, 2910, 10.3390/polym13172910 Pires, 2022, Improvement of processability characteristics of porcelain-based formulations toward the utilization of 3D printing technology Xu, 2020, Development of a quantitative method to evaluate the printability of filaments for fused deposition modeling 3D printing, I, Aust. J. Pharm., 588 Yuan, 2019, Polymeric composites for powder-based additive manufacturing: materials and applications, Prog. Polym. Sci., 91, 141, 10.1016/j.progpolymsci.2018.11.001 Guang Yu, 2008, Three-dimensional printing in pharmaceutics: promises and problems, J. Pharm. Sci., 97, 3666, 10.1002/jps.21284 Tolochko, 2003, Selective laser sintering of single- and two-component metal powders, Rapid Prototyp. J., 9, 68, 10.1108/13552540310467077 Voet, 2018, Biobased acrylate photocurable resin formulation for stereo-lithography 3D printing, ACS Omega, 3, 1403, 10.1021/acsomega.7b01648 Martinez, 2018, Influence of geometry on the drug release profiles of stereolithographic (SLA) 3D-printed tablets, AAPS Pharm. Sci. Tech., 19, 3355, 10.1208/s12249-018-1075-3 Lewis, 2006, Direct ink writing of 3D functional materials, Adv. Funct. Mater., 16, 2193, 10.1002/adfm.200600434 Shirazi, 2015, A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing, Sci. Technol. Adv. Mater., 16, 10.1088/1468-6996/16/3/033502 Chou, 2013, Novel processing of iron–manganese alloy-based biomaterials by inkjet 3-D printing, Acta Biomater., 9, 8593, 10.1016/j.actbio.2013.04.016 Murray, 2020, A defect-resistant co-Ni superalloy for 3D printing, Nat. Commun., 11, 49, 10.1038/s41467-020-18775-0 Clark, 2017, 3D printing of tablets using inkjet with UV photoinitiation, Int. J. Pharm., 529, 523, 10.1016/j.ijpharm.2017.06.085 Zhao, 2018, 4D printing of shape memory polyurethane via stereolithography, Eur. Polym. J., 101, 120, 10.1016/j.eurpolymj.2018.02.021 Wang, 2016, Stereolithographic (SLA) 3D printing of oral modified-release dosage forms, Int. J. Pharm., 503, 207, 10.1016/j.ijpharm.2016.03.016 Janusziewicz, 2016, Layer less fabrication with continuous liquid interface production, Proc. Natl. Acad. Sci. U. S. A., 113, 11703, 10.1073/pnas.1605271113 Hao, 2020, Research on 3D printing and its application in CAD teaching, 315 O’Riordan, 2017, The first bite: imaginaries, promotional publics and the laboratory grown burger, Publ. Understand. Sci., 26, 148, 10.1177/0963662516639001 Islam, 2022, Conventional and recent trends of scaffolds fabrication: a superior mode for tissue engineering, Pharmaceutics, 14, 306, 10.3390/pharmaceutics14020306 Portanguen, 2022, Development of a 3D printer for the manufacture of functional food protein gels, Foods., 11, 458, 10.3390/foods11030458 Zhen, 2016, Research on the impact of 3D printing on the international supply chain, Hindawi Publishing Corporation, Adv. Mater. Sci. Eng., 16 Winston, 2021, Bargaining for innovation, Vill. L. Rev., 66, 119 Han, 2019, 3D printed sensors for biomedical applications: a review, Sensors, 19, 1706, 10.3390/s19071706 Guan, 2007, Fabrication of particulate reservoir-containing, capsulelike, and self-folding polymer microstructures for drug delivery, Small., 3, 412, 10.1002/smll.200600240 Nureddin, 2018, Advances and future perspectives in 4D bioprinting, Biotechnol. J. Loo, 2017, DNA biosensing with 3D printing technology, Analyst., 142, 279, 10.1039/C6AN02038K Tahayeri, 2018, 3D printed versus conventionally cured provisional crown and bridge dental materials, Dent. Mater., 34, 192, 10.1016/j.dental.2017.10.003 Bachtiar, 2020, 3D printing and characterization of a soft and biostable elastomer with high flexibility and strength for biomedical applications, J. Mech. Behav. Biomed. Mater., 104, 10.1016/j.jmbbm.2020.103649 Yu, 2020, The global rise of 3D printing during the COVID-19 pandemic, Nat. Rev. Mater., 5, 637, 10.1038/s41578-020-00234-3 Dongping, 2016, 4D printing: design andnadgorney fabrication of smooth curved surface using controlled self-folding, J. Mech. Design, 1 Khademhosseini, 2018 Xipeng, 2018, 297 Dukov, 2022, Thermoplastic 3D printing technology using a single filament for producing realistic patient-derived breast models, Phys. Med. Biol., 67, 10.1088/1361-6560/ac4c30 Zhou, 2020, Rapid printing of bio-inspired 3D tissue constructs for skin regeneration, Biomaterials., 258, 120, 10.1016/j.biomaterials.2020.120287 Javaid, 2020, Exploring smart material applications for COVID-19 pandemic using 4D printing technology, J. Ind. Integr. Manage., 5, 1 Haleem, 2020, 3D printing applications in bone tissue engineering, J. Clin. Orthop. Trauma, S118, 10.1016/j.jcot.2019.12.002 Yan, 2019, Snakegourd root/Astragalus polysaccharide hydrogel preparation and application in 3D printing, Int. J. Biol. Macromol., 121, 309, 10.1016/j.ijbiomac.2018.10.008 Kim, 2021, Engineering of diseased human skin equivalent using 3D cell printing for representing pathophysiological hallmarks of type 2 diabetes in vitro, Biomaterials., 272, 120, 10.1016/j.biomaterials.2021.120776 Lopez-Ramirez, 2020, Built-in active microneedle patch with enhanced autonomous drug delivery, Adv. Mater., 32, 10.1002/adma.201905740 Jack, 2022, A new dimension: 4D printing opportunities in pharmaceutics, 3D Print. Pharmaceut. AAPS Adv. Pharmaceut. Sci. Ser., 31, 153 Wang, 2021, 3D printing of lightweight polyimide honeycombs with the high specific strength and temperature resistance, ACS Appl. Mater. Interfaces, 13, 15690, 10.1021/acsami.1c01992 Wen, 2014, Biomimetic shark skin: design, fabrication and hydrodynamic function, J. Exp. Biol., 217, 1656, 10.1242/jeb.097097 Andrew Omar, 2018 Bodaghi, 2016, Self-expanding/shrinking structures by 4D printing, Smart Mater. Struct., 25, 10.1088/0964-1726/25/10/105034 Volpe, 2021, Building envelope prefabricated with 3D printing technology, Sustainability., 13, 8923, 10.3390/su13168923 Costantini, 2019, 3D-printing of functionally graded porous materials using on-demand reconfigurable microfluidics, Angew. Chem. Int. Ed. Eng., 58, 7620, 10.1002/anie.201900530 Kalender, 2019, Additive manufacturing and 3D printer technology in aerospace industry, 689 Ashima, 2021, Automation and manufacturing of smart materials in additive manufacturing technologies using internet of things towards the adoption of industry 40, Mater. Today Proc., 45, 5081, 10.1016/j.matpr.2021.01.583 Baba, 2019, Towards sustainable automobiles-advancements and challenges, Prog. Ind. Ecol. Int. J., 13, 315, 10.1504/PIE.2019.102840 Vasvári, 2021, CMT additive manufacturing parameters defining aluminium alloy object geometry and mechanical properties, Materials (Basel), 14, 1545, 10.3390/ma14061545 Raina, 2021, 4D printing for automotive industry applications, J. Inst. Eng. India Ser. D, 102, 521, 10.1007/s40033-021-00284-z Luniya, 2021, Extending the life of classic cars, the additive manufacturing way, 85550 Hung, 2022, A novel application of 3D printing technology facilitating shell wound healing of freshwater turtle, Animals (Basel), 12, 966, 10.3390/ani12080966 James, 2020, A critical review of initial 3D printed products responding to COVID-19 health and supply chain challenges, Emerald. Open Res. Michael, 2017, 3D printing the future: scenarios for supply chains reviewed, Int. J. Phys. Distrib. Log. Manag., 47, 992, 10.1108/IJPDLM-12-2016-0359 Charoo, 2021, Opportunities and challenges of selective laser sintering 3D printing in personalized pharmaceutical manufacturing, Am. Pharmaceut. Rev. Spritam, 2019, 22 Framingham, 2018, 3 Haleem, 2019, Expected role of four-dimensional (4D) CT and four-dimensional (4D) MRI for the manufacturing of smart orthopaedics implants using 4D, J. Clin. Orthopaed. Trauma, xxx, xxx Ashammakhi, 2018, Advances and future perspectives in 4D bioprinting, Biotechnol. J., 13, 1800148, 10.1002/biot.201800148 Gao, 2021, 3D printing of pharmaceutical application: drug screening and drug delivery, Pharmaceutics, 13, 1373, 10.3390/pharmaceutics13091373 Haleem, 2021, Significant roles of 4D printing using smart materials in the field of manufacturing, Adv. Ind. Eng. Polym. Res., 4, 301 Qinglei, 2021, Feedback control for the precise shape morphing of 4D-printed shape memory polymer, IEEE Trans. Ind. Electron., 68, 12698, 10.1109/TIE.2020.3040668 Kuang, 2018, 3D printing of highly stretchable, shape-memory, and self-healing elastomer toward novel 4D printing, ACS Appl. Mater. Interfaces, 10, 7381, 10.1021/acsami.7b18265 Javaid, 2020, Significant advancements of 4D printing in the field of orthopaedics, J. Clin. Orthopaed. Trauma, 11, S485, 10.1016/j.jcot.2020.04.021 Ozbolat, 2013, Bioprinting toward organ fabrication: challenges and future trends, IEEE Trans. Biomed. Eng., 60, 691, 10.1109/TBME.2013.2243912 Mengsuo, 2021, Opportunities and challenges of three-dimensional printing technology in pharmaceutical formulation development, Acta Pharm. Sin. B, 11, 2488, 10.1016/j.apsb.2021.03.015 Haleem, 2020, 3D printed medical parts with different materials using additive manufacturing, Clin. Epidemiol. Glob. Health, 8, 215, 10.1016/j.cegh.2019.08.002 Chen, 2021, Additive manufacturing of a special-shaped energetic grain and its performance, Micromachines (Basel), 12, 1509, 10.3390/mi12121509 Khosravani, 2020, On the environmental impacts of 3D printing technology, Appl. Mater. Today, 20 Haleem, 2019, Polyether ether ketone (PEEK) and its manufacturing of customised 3D printed dentistry parts using additive manufacturing, Clin. Epidemiol. Glob. Health, 7, 54 Haleem, 2019, 4D printing applications in dentistry, Curr. Med. Res. Pract., 9, 41, 10.1016/j.cmrp.2018.12.005 Thomas, 2022, A sustainable circular economic supply chain system with waste minimization using 3D printing and emissions reduction in plastic reforming industry, J. Clean. Prod., 345, 128, 10.1016/j.jclepro.2022.131128