Creep of epoxy–clay nanocomposite adhesive at the FRP interface: A multi-scale investigation

CEB–FIB. FIB bulletin 14, externally bonded FRP reinforcement for RC structures. Lausanne, Switzerland: International Federation for Structural Concrete (FIB); 2001. ACI Committee 440.2R-08. Guide for design and construction of externally bonded FRP systems for strengthening concrete structures. Farmington Hills, MI: American Concrete Institute (ACI); 2008. Davalos, 2012, Comprehensive study on using externally bonded FRP composites for the rehabilitation of reinforced concrete T-beam bridges, J Infrastruct Syst, 18, 89, 10.1061/(ASCE)IS.1943-555X.0000070 Bae, 2013, Behavior of various anchorage systems used for shear strengthening of concrete structures with externally bonded FRP sheets, J Bridge Eng, 18, 837, 10.1061/(ASCE)BE.1943-5592.0000420 Wang, 2013, Performance evaluation of RC beams strengthened with an externally bonded FRP system under simulated vehicle loads, J Bridge Eng, 18, 76, 10.1061/(ASCE)BE.1943-5592.0000324 Cromwell, 2011, Environmental durability of externally bonded FRP materials intended for repair of concrete structures, Constr Build Mater, 25, 2528, 10.1016/j.conbuildmat.2010.11.096 Allen, 2012, Evaluating the long-term durability of externally bonded FRP via field assessments, J Compos Constr, 16, 737, 10.1061/(ASCE)CC.1943-5614.0000305 Reda Taha MM, Tromposch E, Tadros G, Mufti A, Klowak C. Performance based design for FRP strengthening of the roof panels of Calgary Saddledome. In: Rizkalla S, et al. (editors.), ACI special publication SP-215: field application of FR reinforcement: case studies; 2003. p. 385–98. Sen, 2001, Strengthening steel bridge sections using CFRP laminates, Compos Part B: Eng, 39, 309, 10.1016/S1359-8368(01)00006-3 Reda Taha, 2010, Creep effects in plain and FRP-strengthened RC beams, ACI Struct J, 107, 627 Hamed, 2010, Creep in concrete beams strengthened with composite materials, Eur J Mech – A/Solids, 29, 951, 10.1016/j.euromechsol.2010.05.007 Uddin, 2008, Clay, nanoclays, and montmorillonite minerals, Metall Mater Trans A, 39A, 2804, 10.1007/s11661-008-9603-5 Floody, 2009, Natural nanoclays: applications and future trends – a Chilean perspective, Clay Miner, 44, 161, 10.1180/claymin.2009.044.2.161 McLaren, 1996 Ngo, 2009, Effect of temperature, duration and speed of pre-mixing on the dispersion of clay/epoxy nanocomposites, Compos Sci Technol, 69, 1831, 10.1016/j.compscitech.2009.03.024 Bhattacharya, 2008 Ferrier, 2002, Long-time concrete–composite interface characterization for reliability prediction of RC beam strengthened with FRP, Mater Struct, 35, 564, 10.1617/13691 Meshgin, 2009, Experimental and analytical investigations of creep of epoxy adhesive at the concrete–FRP interfaces, Int J Adhes Adhes, 29, 56, 10.1016/j.ijadhadh.2008.01.003 Ferrier, 2011, Creep behavior of adhesives used for external FRP strengthening of RC structures, Constr Build Mater, 25, 461, 10.1016/j.conbuildmat.2010.01.002 Aniskevich, 2010, Effect of moisture on the viscoelastic properties of an epoxy–clay nanocomposite, Mech Compos Mater, 46, 573, 10.1007/s11029-011-9172-3 Synder R. Characterization of nanoclay nanocomposites. In: Proceedings of the composites & polycon. Tampa, FL, USA; 2007. Lam, 2007, Nano-mechanical creep properties of nanoclay/epoxy composite by nanoindentation, Key Eng Mater, 334–335, 669, 10.4028/www.scientific.net/KEM.334-335.669 Kornmann X, Hjalmarsson P, Krivda A. Electrical and mechanical properties of epoxy–clay nanocomposites. In: Proceedings of the 16th international conference on composite materials. Kyoto, Japan; 2007. EPOTUF® 37-127 liquid epoxy resin product bulletin. Reichhold Chemicals, Inc. Cloisite® 30B product bulletin. Southern Clay Products, Inc. Oliver, 1992, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J Mater Res, 7, 1564, 10.1557/JMR.1992.1564 Fischer-Cripps, 2004 Lee, 1960, The contact problem of viscoelastic bodies, J Appl Mech, 27, 438, 10.1115/1.3644020 Ting, 1996, The contact stresses between a rigid indenter and a viscoelastic half-space, J Appl Mech, 88, 845 Lu, 2003, Measurements of creep compliance of solid polymers by nanoindentation, Mech Time-depend Mater, 7, 189, 10.1023/B:MTDM.0000007217.07156.9b Tweedie, 2006, Contact creep compliance of viscoelastic materials via nanoindentation, J Mater Res, 21, 1576, 10.1557/jmr.2006.0197 Giannelis, 1996, Polymer layered silicate nanocomposites, Adv Mater, 8, 29, 10.1002/adma.19960080104 Gu, 2013, Epoxy-resin nanosuspensions and reinforced nanocomposites from polyaniline stabilized multi-walled carbon nanotubes, J Mater Chem C, 1, 729, 10.1039/C2TC00379A Cuéllar-Burgos A, Mesa-Rueda FA, Vargas-Hernndez C, Perilla-Perilla JE. Polyurethane–urea nanocomposites: synthesis and characterization. In: Proceedings of the 8th world congress of chemical engineering. Montreal, Canada; 2009. p. 022201 Dai, 2004, Study on structure and orientation action of polyurethane nanocomposites, Macromolecules, 37, 5615, 10.1021/ma049900g ASTM D3418-12. Standard test method for transition temperatures and enthalpies of fusion and crystallization of polymers by differential scanning calorimetry. West Conshohocken, Pennsylvania, USA: ASTM International; 2012. Magi, 1984, Solid-state high-resolution silicon-29 chemical shifts in silicates, J Phys Chem, 88, 1518, 10.1021/j150652a015 Roessler, 1965, Kramers–Kronig analysis of reflection data, Br J Appl Phys, 16, 1119, 10.1088/0508-3443/16/8/310 Nyczyk, 2012, Cross-linking of linear vinylpolysiloxanes by hydrosilylation – FTIR spectroscopic studies, Vib Spectrosc, 59, 1, 10.1016/j.vibspec.2012.01.002 Vašková H, Křesálek V. Raman spectroscopy of epoxy-resin crosslinking. In: Proceedings of the 13th WSEAS international conference on automatic control, modeling and simulation (ACMOS 2011); 2011. p. 357–61.