Creating functionally graded concrete materials with varying 3D printing parameters

10.1080/17452759.2019.1709009

10.1051/matecconf/20179701026

10.1016/j.addma.2016.10.006

10.1016/j.conbuildmat.2018.01.018

ASTM C293/C293M-16, 2016, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)

10.1007/978-3-662-05086-6

10.1007/978-3-030-49916-7_19

10.3390/ma12091374

10.1016/j.compositesb.2021.109437

Concrete Damaged Plasticity. 2017. Accessed11 November 2018. [Online]. https://abaqus-docs.mit.edu/2017/English/SIMACAEMATRefMap/simamat-c-concretedamaged.htm.

10.1016/j.addma.2020.101146

10.22260/ISARC2017/0033

10.1016/j.jclepro.2022.130749

10.2749/101686616X1081

10.1016/j.matdes.2019.107651

10.1016/j.proeng.2015.11.076

10.14716/ijtech.v7i5.3449

10.1016/j.ijsolstr.2015.05.002

Kaplan M. F., 1961, American Concrete Institute Journal Proceedings, 58, 591

10.1016/S0921-5093(03)00578-1

10.1016/j.addma.2020.101654

Larsson, R. 2016. “Methodology for Topology and Shape Optimization: Application to a Rear Lower Control Arm.” Master Thesis, Department of Applied Mechanics, Chalmers University of Technology, Goteborg.

10.1016/j.cemconres.2011.12.003

10.1016/j.cirp.2012.03.050

10.1016/j.addma.2018.06.023

Lott, J., and C. E. Kesler. 1966. “Crack Propagation in Plain Concrete.” Symposium on Structure of Portland Cement Paste and Concrete, Special Report No. 90, Highway Research Board, pp. 204–218. Accessed 10 September 2019. http://onlinepubs.trb.org/Onlinepubs/sr/sr90/90-017.pdf.

10.1007/978-3-319-53756-6

10.1007/978-3-319-59471-2_37

10.1016/B978-0-12-398364-0.00004-8

10.1016/j.conbuildmat.2014.10.043

10.1016/j.autcon.2021.104060

10.1080/17452759.2011.558588

10.1201/b11341-78

10.1016/j.matlet.2017.07.123

10.1016/j.acme.2017.02.008

Paulino G. H., 2005, Functionally Graded Materials VIII, 492, 435

Petersson, P. E. 1981. “Crack Growth and Development of Fracture Zones in Plain Concrete and Similar Materials.” Doctoral Dissertation, Dividion of Building Materials Lund Institute of Technology, Lund University. Accessed 30 August 2019. https://inis.iaea.org/collection/NCLCollectionStore/_Public/13/668/13668228.pdf.

Rashid, R., S. H. Masooda, D. Ruan, S. Palanisamy, X. Huang, and R. A. R. Rashid. 2018. “Topology Optimisation of Additively Manufactured Lattice Beams for Three-Point Bending Test.” Annual International Solid Freeform Fabrication Symposium, 635–647.

10.3141/2037-04

10.1080/17452759.2018.1476064

10.1016/j.jmatprotec.2019.04.007

10.1080/17452759.2017.1326724

10.1016/j.compositesb.2019.106968

10.1080/17452759.2013.778175

10.1016/j.addma.2021.102569

10.1016/j.cemconres.2020.106169

Zhang M. H., 1991, American Concrete Institute Materials Journal, 88, 240

10.1617/s11527-021-01632-x