Cracking investigation on fog seal technology with waterborne acrylate and polyurethane as a clean modification approach

Braham, 2013, Exploration of a performance test for emulsion treated asphalt surfaces, J. Test. Eval., 41, 20120076, 10.1520/JTE20120076

Chen, 2017, Optimal thresholds for pavement preventive maintenance treatments using LTPP data, J. Transport. Eng., Part A: Systems, 143, 4017018, 10.1061/JTEPBS.0000044

Cui, 2019, Quantitative evaluation of active based adhesion in Aggregate-Asphalt by digital image analysis, J. Adhes. Sci. Technol., 33, 1544, 10.1080/01694243.2019.1602912

Cui, 2019, Silicone resin polymer used in preventive maintenance of asphalt mixture based on fog seal, Polymers, 11, 10.3390/polym11111814

Dong, 2015, Failure probability of resurfaced preventive maintenance treatments, Transport. Res. Rec., 2481, 65, 10.3141/2481-09

Du, 2020, Low temperature performance characteristics of polyethylene modified asphalts – a review, Construct. Build. Mater., 264, 120704, 10.1016/j.conbuildmat.2020.120704

Feng, 2020, Study on workability and skid resistance of bio-oil–modified fog seal with sand, J. Test. Eval., 48, 20190224, 10.1520/JTE20190224

Geng, 2017, Research on performance of a dense graded ultra-thin wearing course mixture, Appl. Sci., 7, 800, 10.3390/app7080800

Guo, 2017, Development and performance of sand fog seal with cooling and air purification effects, Construct. Build. Mater., 141, 608, 10.1016/j.conbuildmat.2017.03.003

He, 2020, Functional materials based on active carbon and titanium dioxide in fog seal, Materials, 13, 10.3390/ma13225267

Hou, 2019, Application of spectrophotometry on detecting asphalt content of emulsified asphalt, J. Clean. Prod., 215, 626, 10.1016/j.jclepro.2019.01.102

Hu, 2017, Evaluation of nano-TiO 2 modified waterborne epoxy resin as fog seal and exhaust degradation material in asphalt pavement, J. Test. Eval., 45, 20160157, 10.1520/JTE20160157

Hu, 2019, Laboratory evaluation of waterborne epoxy bitumen emulsion for pavement preventative maintenance application, Construct. Build. Mater., 197, 220, 10.1016/j.conbuildmat.2018.11.223

Im, 2013, Methods for fog seal field test with polymer-modified emulsions, Transport. Res. Rec., 2361, 88, 10.3141/2361-11

Islam, 2017, Quantification of reduction in hydraulic conductivity and skid resistance caused by fog seal in low-volume roads, Transport. Res. Rec., 2657, 99, 10.3141/2657-11

Kakar, 2015, A review on moisture damages of hot and warm mix asphalt and related investigations, J. Clean. Prod., 99, 39, 10.1016/j.jclepro.2015.03.028

Kiihnl, 2021, Exploring the influence of pavement preservation, maintenance, and rehabilitation on Arkansas' highway network: an education case study, Int. J. Pavement Eng., 22, 570, 10.1080/10298436.2019.1628960

Kim, 2016, Estimation of service-life reduction of asphalt pavement due to short-term ageing measured by GPC from asphalt mixture, Road Mater. Pavement Des., 17, 153, 10.1080/14680629.2015.1066704

Li, 2019, Life cycle assessment and life cycle cost analysis of recycled solid waste materials in highway pavement: a review, J. Clean. Prod., 233, 1182, 10.1016/j.jclepro.2019.06.061

Li, 2020, Surface modification of ground tire rubber particles by cold plasma to improve compatibility in rubberised asphalt, Int. J. Pavement Eng., 1

Li, 2019, Preparation and characterization of waterborne epoxy modified bitumen emulsion as a potential high-performance cold binder, J. Clean. Prod., 235, 1265, 10.1016/j.jclepro.2019.06.267

Liu, 2019, Performance evaluation of new waterborne epoxy resin modified emulsified asphalt micro-surfacing, Construct. Build. Mater., 214, 93, 10.1016/j.conbuildmat.2019.04.107

Liu, 2020, Laboratory evaluation of emulsified asphalt reinforced with glass fiber treated with different methods, J. Clean. Prod., 274, 123116, 10.1016/j.jclepro.2020.123116

Luo, 2018, Review of mechanistic-empirical modeling of top-down cracking in asphalt pavements, Construct. Build. Mater., 191, 1053, 10.1016/j.conbuildmat.2018.10.005

Prapaitrakul, 2010, Fog seal treatment effectiveness analysis of pavement binders using the t -test statistical approach, Petrol. Sci. Technol., 28, 1895, 10.1080/10916460903330007

Praticò, 2015, Macrotexture modeling and experimental validation for pavement surface treatments, Construct. Build. Mater., 95, 658, 10.1016/j.conbuildmat.2015.07.061

Saghafi, 2019, Performance evaluation of slurry seals containing reclaimed asphalt pavement, Transport. Res. Rec., 2673, 358, 10.1177/0361198118821908

Tarefder, 2018, Cost-effectiveness analysis of chip seal with and without millings, Int. J. Pavement Eng., 19, 893, 10.1080/10298436.2016.1219599

Wang, 2021, Effects of SARA fractions on low temperature properties of asphalt binders, Road Mater. Pavement Des., 22, 539, 10.1080/14680629.2019.1628803

Xiang, 2020, Applications of epoxy materials in pavement engineering, Construct. Build. Mater., 235, 117529, 10.1016/j.conbuildmat.2019.117529

Xu, 2021, Impact of constituent migration on colloid structure and rheological characteristics of emulsified asphalt with self-crosslinking modifiers, Colloid. Surface. Physicochem. Eng. Aspect., 619, 126530, 10.1016/j.colsurfa.2021.126530

Xu, 2021, Chemical, morphological and rheological investigations of SBR/SBS modified asphalt emulsions with waterborne acrylate and polyurethane, Construct. Build. Mater., 272, 121972, 10.1016/j.conbuildmat.2020.121972

You, 2020, Stability and rheology of asphalt-emulsion under varying acidic and alkaline levels, J. Clean. Prod., 256, 120417, 10.1016/j.jclepro.2020.120417

Zhang, 2019, Traffic open time prediction of fog seal with sand using image processing technology, Construct. Build. Mater., 209, 9, 10.1016/j.conbuildmat.2019.03.070