Crack coalescence in a rock-like material containing two cracks

GEO Landslide studies 1991, Blast-induced Rock Slide at Shau Kei Wan. Geotechnical Engineering Office, Civil Engineering Department Hong Kong, Special Project Report, SPR 6/91, 1991

Griffith, 1921, The phenomena of rupture and flow in solids, Philos. Trans. R. Soc. London Ser. A, 221, 163, 10.1098/rsta.1921.0006

Griffith, A. A., The theory of rupture. Proc. 1st Int. Congr. Appl. Mech. Delft, 1924, pp. 55–63

Irwin, 1957, Analysis of stresses and strains near the ends of a crack traversing a plate, J. Appl. Mech., 24, 361, 10.1115/1.4011547

Hoek, 1965, Brittle fracture propagation in rock under compression, Int. J. Fract. Mech., 1, 137, 10.1007/BF00186851

Pang, 1972, Crack growth and faulting in cylindrical specimens of Chelmsford granite, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 9, 37, 10.1016/0148-9062(72)90050-2

Hallbauer, 1973, Some observations concerning the microscopic and mechanical behaviour of quartzite specimens in stiff triaxial compression tests, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 10, 713, 10.1016/0148-9062(73)90015-6

Tapponnier, 1976, Development of stress-induced microcracks in Westerly granite, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 13, 103, 10.1016/0148-9062(76)91937-9

Olsson, 1976, Microcrack nucleation in marble, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 13, 53, 10.1016/0148-9062(76)90704-X

Kranz, 1979, Crack-crack and crack-pore interactions in stressed granite, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 16, 37, 10.1016/0148-9062(79)90773-3

Batzle, 1980, Microcrack closure in rocks under stress: Direct observation, J. Geophys. Res., 85, 7072, 10.1029/JB085iB12p07072

Wong, 1982, Micromechanics of faulting in Westerly granite, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 19, 49, 10.1016/0148-9062(82)91631-X

Kranz, 1983, Microcracks in rocks: A review, Tectonophysics, 100, 449, 10.1016/0040-1951(83)90198-1

Dey, 1981, Some mechanisms of microcrack growth and interaction in compressive rock failure, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 18, 199, 10.1016/0148-9062(81)90974-8

Steif, 1984, Crack extension under compressive loading, Eng. Fract. Mech., 20, 463, 10.1016/0013-7944(84)90051-1

Horii, 1985, Compression-induced microcrack growth in brittle solids: Axial splitting and shear failure, J. Geophys. Res., 90, 3105, 10.1029/JB090iB04p03105

Ashby, 1986, The failure of brittle solids containing small cracks under compressive stress states, Acta Metall., 34, 497, 10.1016/0001-6160(86)90086-6

Sammis, 1986, The failure of brittle porous solids under compressive stress states, Acta Metall., 34, 511, 10.1016/0001-6160(86)90087-8

Kemeny, J. M., Cook, N. G. W., Crack models for the failure of rock under compression. Proc. 2nd Int. Conf. Constitutive Laws for Eng. Materials, 2, 1987, pp. 879-887

Kemeny, 1991, A model for nonlinear rock deformation under compression due to subcritical crack growth, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 28, 459, 10.1016/0148-9062(91)91121-7

Fredrich, 1990, Effect of grain size on brittle and semibrittle strength: Implications for micromechanical modelling of failure in compression, J. Geophys. Res., 95, 10907, 10.1029/JB095iB07p10907

Lajtai, 1969, Shear strength of weakness planes in rock, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 6, 499, 10.1016/0148-9062(69)90016-3

Savilahti, T., Rock bridges in jointed rock masses — state-of-the art. Research report, Tulea 1988, 18, 1988

Savilahti, T., Nordlund, E. and Stephansson, O., Shear box testing and modelling of joint bridges. Rock Joints. Proc. Int. Symp. Rock Joints (Norway), ed. Barton and Stephansson, 1990, pp. 295–300

Li, C. Stephansson, O. and Savilahti, T., Behaviour of rock joints and rock bridges in shear testing. Rock joints. Proc. Int. Symp. Rock Joints (Norway), ed. Barton and Stephansson, 1990, pp. 259–266

Reyes, O., Experimental study and analytical modelling of compressive fracture in brittle materials. Ph.D. thesis, Mass. Inst. of Technol., Cambridge, 1991

Reyes, O., Einstein, H. H., Failure mechanism of fractured rock — a fracture coalescence model. Proc. 7th Int. Conf. on Rock Mech. 1, 1991, pp. 333-340

Shen, 1995, Coalescence of fracture under shear stresses in experiments, J. Geophys. Res., 100, 5975, 10.1029/95JB00040

Shen, B. and Stephansson, O., Cyclic loading characteristics of joints and rock bridges in a jointed rock specimen. Rock joints. Proc. Int. Symp. Rock Joints (Norway), ed. Barton and Stephansson, 1990, pp. 725–729

Shen, 1993, Numerical analysis of mixed mode I and mode II fracture propagation, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 30, 861, 10.1016/0148-9062(93)90037-E

Shen, 1995, The mechanism of fracture coalescence in compression-experimental study and numerical simulation, Eng. Fract. Mech., 51, 73, 10.1016/0013-7944(94)00201-R

Nelson, R. A. and Hirschfeld, R. C., Modelling a jointed rock mass. Report R68-70, Mass. Inst. of Technol., Cambridge, 1968

Obert, L. and Duval, W. I., Rock Mechanics and the Design of Structures in Rock. Wiley, New York, 1967, pp. 146–178

Stimpson, 1970, Modelling materials for engineering rock mechanics, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 7, 77, 10.1016/0148-9062(70)90029-X

Zhu, 1993, Physical simulation tests on jointed rock and strength prediction, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 30, 545, 10.1016/0148-9062(93)92220-K

Labuz, 1996, Plane-strain compression of rock-like materials, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 33, 573, 10.1016/0148-9062(96)00012-5

Momber, 1997, Test parameter analysis in abrasive water jet cutting of rocklike materials, Int. J. Rock Mech. Min. Sci., 34, 17, 10.1016/S1365-1609(97)80030-5

Barton, 1972, A model study of rock-joint deformation, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 9, 579, 10.1016/0148-9062(72)90010-1

Bandis, 1981, Experimental studies of scale effects on the shear behaviour of rock joints, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 18, 1, 10.1016/0148-9062(81)90262-X

ASTM Test method for unconfined compressive strength of intact rock core specimens. ASTM designation D2938-86, 1986

ASTM Standard method of test for splitting tensile strength of cylindrical concrete specimens. ASTM designation C496-71, 1971

Farmer, I. W., Engineering Properties of Rocks. E&F Spon, 1968

Farmer I. W., Engineering Behaviour of Rocks. 2nd Ed., Chapman&Hall, London, 1983

Atkinson, B. K. and Meredith, P. G., Experimental fracture mechanics data for rocks and minerals. Fracture Mechanics of Rock. Academic Press London, 1987

Swan, 1980, Fracture stress scale effects for rocks in bending, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 17, 317, 10.1016/0148-9062(80)90514-8

Swan, 1983, A multi-purpose rock core testing device, Geotech. Test. J. GTFODJ, 6, 18, 10.1520/GTJ10819J

Melin, 1986, When does a crack grow under mode II conditions?, Int. J. Fract., 30, 103, 10.1007/BF00034020

Holcomb, 1980, The reversible Griffith crack: a viable model for dilatancy, J. Geophys. Res., 85, 7101, 10.1029/JB085iB12p07101

Costin, 1983, A microcrack model for deformation of brittle rock, J. Geophys. Res., 88, 9485, 10.1029/JB088iB11p09485

Holcomb, 1978, A quantitative model of dilatancy in dry rock and its application to Westerly granite, J. Geophys. Res., 83, 4941, 10.1029/JB083iB10p04941

Kachanov, 1982, A microcrack model of rock inelasticity. I. Friction sliding on microcracks, Mech. Mater., 1, 19, 10.1016/0167-6636(82)90021-7

Kachanov, 1982, A microcrack model of rock inelasticity. II. Propagation of microcracks, Mech. Mater., 1, 29, 10.1016/0167-6636(82)90022-9

Nemat-Nasser, 1988, A microcrack model of dilatancy in brittle material, J. Appl. Mech., 55, 24, 10.1115/1.3173647

Wong, 1996, Microcracking and grain size effect in Yuen Long marbles, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 33, 479, 10.1016/0148-9062(96)00007-1

Martins, R. D. A., The origin of dimensional analysis. Journal of the Franklin Institute, 1983, 311, 331–337

Buckingham, 1914, On physically similar systems: Illustration of the use of dimensional equations, Phys. Rev. D, 4, 345, 10.1103/PhysRev.4.345

Buckingham, 1915, Model experiments and the forms of empirical equations, Trans. ASME, 37, 263

Schmidt, R. and Housen, K., Problem solving with dimension analysis. The Industrial Physicist July 1995, 1995, 21–24

Langhaar, H. L., Dimensional Analysis and Theory of Models. Wiley, New York, 1951

Focken, C. M., Dimensional Methods and their Applications. Edward Arnold, London, 1953

Duncan, W. J., Physical Similarity and Dimensional Analysis. Edward Arnold, London, 1953

Jupp, E. W., An Introduction to Dimensional Method. Cleaver-Hume, London, 1962

Huntley, H. E., Dimensional Analysis. Dover, New York, 1967

Douglas, J. F., An introduction to Dimensional Analysis for Engineers. Pitman and Sons, London, 1969

Taylor, E. S., Dimensional Analysis for Engineers. Clarendon Press, Oxford, 1974

Bridgman, P. W., Dimensional Analysis. Yale University Press, New Haven, 1978