Crack band theory for fracture of concrete
Tóm tắt
Từ khóa
Tài liệu tham khảo
Asce State-of-the-Art Report onFinite element analysis of reinforced concrete, prepared by a Task Committee chaired by A. Nilson, Amer. Soc. of Civil Engrs., New York, 1982.
Barenblatt G. I.—The formation of equilibrium cracks during brittle fracture. General ideas and hypothesis Axially-symmetric cracks, Prikladnaya Matematika i Mekhanika, Vol. 23, No. 3, 1959, pp. 434–444.
Bažant Z. P.—Crack band model for fracture of geomaterials, Proc., 4th Intern. Conf. on Numerical Methods in Geomechanics, held in Edmonton, Alberta, Canada, June 1982, ed. by Z. Eisenstein, Vol. 3.
Bažant Z. P.—Instability, ductility and size effect in strain-softening concrete. J. of the Engineering Mechanics Division ASCE, Vol. 102, Apr. 1976, No. EM2, pp. 331–344, Paper 12042.
Bažant Z. P.—Mechanics of fracture and progressive cracking in concrete structures, to appear in “Fracture Mechanics applied to Concrete Structures’, a volume in the series “Fracture Mechanics applied to Engineering Puoblems”, ed. by G. C. Sin, publ. by Martinus Nijhoff Publishers, The Hagues. (b)Bazant Z. P., Pfeiffer, P.—Preprints, 7 th Intern. Conference in Structural Mechanics in Reactor Technology (SMIRT), Chicago, Aug. 1983,Vol. H, in press.
Bažant Z. P., Cedolin L.—Blunt crack band propagation in finite element analysis, Journal of the Engineering Mechanics Division, ASCE, Vol. 105, No. EM2, Proc. Paper 14529, April, 1979, pp. 297–315.
Bažant Z. P., Cedolin L.—Finite element modeling of crack band propagation, Journal of Structural Engineering ASCE, Vol. 109, No. ST2, Jan. 1983, pp. 69–82.
Bažant Z. P., Cedolin L.—Fracture mechanics of reinforced concrete, Journal of the Engineering Mechanics Division, ASCE, Vol. 106, No. EM6, Proc. Paper 15917, December, 1980, pp. 1287–1306.
Bažant Z. P., Gambarova P. G.—Rough cracks in reinforced concrete, Journal of the Structural Division, ASCE, Vol. 106, No. ST4, Paper No. 15330, April, 1980, pp. 819–842.
Bažant Z. P., Kim S. S.—Plastic-fracturing theory for concrete, Journal of the Engineering Mechanics Division, ASCE, Vol. 105, No. EM3, Proc. Paper 14653, June, 1979, pp. 407–428.
Bažant Z. P., Oh B. H.—Concrete fracture via stress-strain relations, Report No. 81-10/665c, Center for Concrete and Geomaterials, Technological Institute, Northwestern University, Evanston, Ill., Oct. 1981.
Bažant Z. P., Ranula L.—Statistical stability effects in concrete failure, J. of the Engineering Mechanics Division, ASCE, Vol. 104, Oct. 1978, No. EM5, pp. 1195–1212, Paper 14074.
Bažant Z. P., Tsubaki T.—Slip-dilatancy model for cracked reinforced concrete, Journal of the Structural Division, ASCE, Vol. 106, No. ST9, Paper No. 15704, September, 1980, pp. 1947–1966.
Brown J. H.—Measuring the fracture toughness of cement paste and mortar, Magazine of Concrete Research, Vol. 24, No. 81, December, 1972, pp. 185–196.
Carpinteri A.—Experimental determination of fracture toughness parameters K IC and J IC for aggregative materials, Advances in Fracture Research’, (Proc., 5th International Conference on Fracture, Cannes, France, 1981), Ed. by D. François, Vol. 4, pp. 1491–1498.
Carpinteri A.—Static and energetic fracture parameters for rocks and concretes, Report, Istituto di Scienza delle Costruzioni-Ingegneria, University of Bologna, Italy, 1980.
Cedolin L., Bazant Z. P.—Effect of finite element choice in blunt crack band analysis, Computer Methods in Applied Mechanics and Engineering, Vol. 24, No. 3, December 1980, pp. 305–316.
Entov V. M. Yagust V. I.—Experimental investigation of laws geovering quasi-static development of macrocracks in concrete, Mechanics of Solids (translation from Russian), Vol. 10, No. 4, 1975, pp. 87–95.
Evans R. H., Marathe M. S.—Microcracking and stress-strain curves for concrete in tension, Materiaux et Constructions, Vol. 1, No. 1, 1968, pp. 61–64.
Gjorv O. E., Sorensen S. I., Arnesen A.—Notch sensitivity and fracture toughness of concrete, Cement and Concrete Research, Vol. 7, 1977, pp. 333–344.
Hillerborg A., Modéer M., Petersson P. E.—Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cement and Concrete Research, Vol. 6, 1976, pp. 773–782.
Huang C. M. J.—Finite element and experimental studies of stress intensity factors for concrete beams, Thesis Submitted in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy, Kansas State University, Kansas, 1981.
Isida M.—Elastic analysis of cracks and stress intensity factors, Baifukan Publishing Co., Japan, 1976.
Janson J., Hult J.—Fracture mechanics and damage mechanics—a combined approach, Journal de Mécanique appliquée, Vol. 1, No. 1, 1977, pp. 69–84.
Kachanov L. M.—Time of rupture process under creep conditions, Izv. Akad. Nauk, SSSR. Otd. Tekh. Nauk, No. 8, 1958, pp. 26–31.
Kaplan M. F.—Crack propagation and the fracture of concrete. American Concrete Institute Journal, Vol. 58, No. 11, November 1961.
Kesler C. E., Naus D. J., Lott J. L.—Fracture mechanics-Its applicability to concrete, International Conference on the Mechanical Behavior of Materials, Kyoto, August 1971.
Kfouri A. P., Miller, K. J.—Stress displacement, line integral and closure energy determinations of crack tip stress intensity factors, Int. Journal of Press. Ves. and Piping, Vol. 2, No. 3, July 1974, pp. 179–191.
Kfouri A. P., Rice J. R.—Elastic/plastic separation energy rate for crack advance in finite growth steps, in “Fracture 1977” (Proc. of the 4th Intern. Conf. on Fracture, held in Waterloo, Ontario, June 1977), ed. by D. M. R. Taplin, University of Waterloo Press 1977, Vol. 1, pp. 43–59.
Knauss W.C.—On the steady propagation of a crack in a viscoelatic sheet; experiments and analysis, reprinted fromThe Deformation in fracture of high polymers, Ed. by H. H. Kausch, Pub. Plenum Press, 1974, pp. 501–541.
Knott J. F.—Fundamentals of fracture mechanics, Butterworths, London, England, 1973.
Kupfer H. B., Gerstle K. H.—Behavior of concrete under biaxial stress. Journal of the Engineering Mechanics Division, ASCE, Vol. 99, No. EM4, Proc. Paper 9917, August, 1973, pp. 853–866.
Liu T. C. Y., Nilson A. H., Slate F. O.—Biaxial stress-strain relations for concrete, Journal of the Structural Division, ASCE, Vol. 98, No. ST5, Proc. Paper 8905, May, 1972, pp. 1025–1034.
Løland K. E.—Continuous damage model for load-response estimation of concrete, Cement and Concrete Research, Vol. 10, 1980, pp. 395–402.
Lorrain M.—On the application of the damage theory to fracture mechanics of concrete, A State-of-the-Art Report, Civil Engineering Department, I.N.S.A., 31077 Toulouse, Cedex, France.
Marchertas A. H., Belytschko T. B., Bazant Z. P.—Transient analysis of LMFBR reinforced/prestressed concrete containment, Trans., 5th Intern. Conf. on Structural Mechancis in Reactor Rechnology, West Berlin, Aug. 1979, Vol. H., Paper H8/1, ed. by T. A. Jaeger and B. A. Boley, publ. by North Holland.
Mazars J.—Mechanical damage and fracture of concrete structures, 5th International Conference on Fracture, Edited by D. François, Cannes, France, 29 March-3 April, 1981, Vol. 4, pp. 1499–1506.
Mindess S., Diamond S.—A preliminary SEM study of crack propagation in mortar, Cement and Concrete Research, Vol. 10, 1980, pp. 509–519.
Mindess S., Lawrence F. V., Kesler C. E.—The J-integral as a fracture criterion for fiber reinforced concrete, Cement and Concrete Research, Vol. 7, 1977, pp. 731–742.
Naus D. J.—Applicability of linear-plastic fracture mechanics to Portland cement concretes, Thesis Submitted in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy, University of Illinois at Urbana-Champaign, 1971.
Paris P. C.—Fracture mechanics in the elastic plastic regime, Flaw Growth and Fatigue, ASTM Special Techn. Publ. 631, Amer. Soc. for Testing Materials, Philadelphia, 1977, pp. 3–27.
Petersson P. E.—Fracture energy of concrete: Method of determination, Cement and Concrete Research, Vol. 10, 1980, pp. 78–89, and “Fracture Energy of Concrete: Practical Performance and Experimental Results,” Cement and Concrete Research, Vol. 10, 1980, pp. 91–101.
Rice J. R.—The localization of plastic deformation, Preprints of the 14th IUTAM Congress (Int. Union of Theor. and Appl. Mech.), held in Delft, Netherlands, in 1976, Edited by W. T. Koiter, North Holland Publishing Co., Amsterdam, pp. 207–220.
Saouma V. E., Ingraffea A. R., Catalano D. M.—Fracture toughness of concrete-K IC revisited,Journal of the Engineering Mechanics Division, Vol. 109, N o EMG, Dec. 1982, pp. 1152–1166.
Shah S. P., McGarry F. J.—Griffith fracture criterion and concrete, Journal of the Engineering Mechanics Division, ASCE, Vol. 97, No. EM6, Proc. Paper 8597, December, 1971, pp. 1663–1676.
Sok C., Baron J., François D.—Mécanique de la rupture appliquée au béton hydraulique, Cement and Concrete Research, Vol. 9, 1979, pp. 641–648.
Suidan M., Schnobrich W. C.—Finite element analysis of reinforced concrete, Journal of the Structural Division, ASCE, Vol. 99, No. ST10, Proc. Paper 10081, October 1973, pp. 2109–2122.
Swartz S. E., Hu, K. K., Fartash M., Huang, C. M. J.—Stress intensity factors for plain concrete in bending-Prenotched versus precracked beams, Report, Department of Civil Engineering, Kansas State University, Kansas, 1981.
Tada H., Paris P. C., Irwin G. R.—The stress analysis of cracks handbook, Del Research Corp., Hellertown, Pa., 1973.
Walsh P. F.—Fracture of plain concrete, The Indian concrete Journal, Vol. 46, No. 11, November 1979, pp. 469, 470, and 476.
Wecharatana M., Shah S. P.—Resistance to crack growth in Portland cement composites, Report, Department of Material Engineering, University of Illinois at Chicago Circle, Chicago, Illinois, November 1980.