Coupling effects of high magnetic field and annealing on the microstructure evolution and mechanical properties of additive manufactured Ti–6Al–4V

Liu, 2018 Council, 2014 Wang, 2019, Integrated computational materials engineering for advanced materials: a brief review, Comput. Mater. Sci., 158, 42, 10.1016/j.commatsci.2018.11.001 Wang, 2020, A brief review of data-driven ICME for intelligently discovering advanced structural metal materials: insight into atomic and electronic building blocks, J. Mater. Res., 35, 872, 10.1557/jmr.2020.43 Olson, 2014, Materials genomics: from CALPHAD to flight, Scr. Mater., 70, 25, 10.1016/j.scriptamat.2013.08.032 Motaman, 2020, Optimal design for metal additive manufacturing: an integrated computational materials engineering (ICME) approach, JOM, 72, 1092, 10.1007/s11837-020-04028-4 Reichardt, 2020, Advances in additive manufacturing of metal-based functionally graded materials, Int. Mater. Rev., 29 Yusuf, 2019, Review: the impact of metal additive manufacturing on the aerospace industry, Metals, 9 Sacco, 2019, Additive manufacturing for space: status and promises, Int. J. Adv. Manuf. Technol., 105, 4123, 10.1007/s00170-019-03786-z Owens, 2016, Systems analysis of in-space manufacturing applications for the international space station and the evolvable mars campaign Sears, 2018, Impact evaluation of in-space additive manufacturing and recycling technologies for on-orbit servicing, J. Spacecraft Rockets, 55, 1498, 10.2514/1.A34135 Wang, 2019, Rapid solidification kinetics and mechanical property characteristics of Ni-Zr eutectic alloys processed under electromagnetic levitation state, Mater. Sci. Eng. A, 772 Mohr, 2019, Thermophysical properties of liquid Zr52.5Cu17.9Ni14.6Al10Ti5-prospects for bulk metallic glass manufacturing in space, Npj Micrograv, 5, 24, 10.1038/s41526-019-0084-1 Prater, 2018 2020 Prater, 2017, NASA's in-space manufacturing Project: development of a multimaterial fabrication laboratory for the international space station Yan, 2019, Mechanical and in vitro study of an isotropic Ti6Al4V lattice structure fabricated using selective laser melting, J. Alloys Compd., 782, 209, 10.1016/j.jallcom.2018.12.220 Carter, 2020, Reducing MRI susceptibility artefacts in implants using additively manufactured porous Ti-6Al-4V structures, Acta Biomater., 107, 338, 10.1016/j.actbio.2020.02.038 Duyn, 2012, The future of ultra-high field MRI and fMRI for study of the human brain, Neuroimage, 62, 1241, 10.1016/j.neuroimage.2011.10.065 Wysocki, 2017, Laser and electron beam additive manufacturing methods of fabricating titanium bone implants, Appl. Sci Basel, 7, 657, 10.3390/app7070657 Vilaro, 2011, As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting, Metall. Mater. Trans., 42, 3190, 10.1007/s11661-011-0731-y Ming, 2019, Dynamic mechanical properties and machinability characteristics of selective laser melted and forged Ti6Al4V, J. Mater. Process. Technol., 271, 284, 10.1016/j.jmatprotec.2019.04.015 ASTM F1472-14, 2014 Xu, 2017, In situ tailoring microstructure in additively manufactured Ti-6Al-4V for superior mechanical performance, Acta Mater., 125, 390, 10.1016/j.actamat.2016.12.027 Kok, 2018, Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review, Mater. Des., 139, 565, 10.1016/j.matdes.2017.11.021 Zhao, 2018, Improved mechanical properties of additive manufactured Ti-6Al-4V alloy via annealing in high magnetic field, Rare Met. Mater. Eng., 47, 3678, 10.1016/S1875-5372(19)30017-7 Vrancken, 2012, Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties, J. Alloy. Compd., 541, 177, 10.1016/j.jallcom.2012.07.022 He, 2018, Microstructural characteristic and mechanical property of Ti6Al4V alloy fabricated by selective laser melting, Vacuum, 150, 79, 10.1016/j.vacuum.2018.01.026 Thijs, 2010, A study of the microstructural evolution during selective laser melting of Ti–6Al–4V, Acta Mater., 58, 3303, 10.1016/j.actamat.2010.02.004 Wang, 2015, Experimental platform for solidification and in-situ magnetization measurement of undercooled melt under strong magnetic field, Rev. Sci. Instrum., 86, 10.1063/1.4906931 Wei, 2020, Influence of high magnetic field on the liquid-liquid phase separation behavior of an undercooled Cu–Co immiscible alloy, J. Alloys Compd., 842, 10.1016/j.jallcom.2020.155502 Tsai, 2014, Improved mechanical properties of Ti-6Al-4V alloy by electron beam welding process plus annealing treatments and its microstructural evolution, Mater. Des., 60, 587, 10.1016/j.matdes.2014.04.037 Barriobero-Vila, 2017, Inducing stable alpha plus beta microstructures during selective laser melting of Ti-6Al-4V using intensified intrinsic heat treatments, Materials, 10, 268, 10.3390/ma10030268 Haubrich, 2019, The role of lattice defects, element partitioning and intrinsic heat effects on the microstructure in selective laser melted Ti-6Al-4V, Acta Mater., 167, 136, 10.1016/j.actamat.2019.01.039 Yang, 2019, Investigation into the dynamic mechanical properties of selective laser melted Ti-6Al-4V alloy at high strain rate tensile loading, Mater. Sci. Eng. A, 745, 440, 10.1016/j.msea.2019.01.010 Zhao, 2016, Comparison of the microstructures and mechanical properties of Ti–6Al–4V fabricated by selective laser melting and electron beam melting, Mater. Des., 95, 21, 10.1016/j.matdes.2015.12.135 Elmer, 2005, In situ observations of lattice expansion and transformation rates of α and β phases in Ti–6Al–4V, Mater. Sci. Eng. A, 391, 104, 10.1016/j.msea.2004.08.084 Obasi, 2012, Effect of β grain growth on variant selection and texture memory effect during α→β→α phase transformation in Ti-6Al-4V, Acta Mater., 60, 1048, 10.1016/j.actamat.2011.10.038 Burgers, 1934, On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium, Physica, 1, 561, 10.1016/S0031-8914(34)80244-3 Li, 2019, Fabrication, microstructure characterization and mechanical property of the Ti6Al4V-(NiTif/Mg3AlZn) laminate composite, J. Alloy. Compd., 774, 656, 10.1016/j.jallcom.2018.10.074 Gu, 2012, Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium, Acta Mater., 60, 3849, 10.1016/j.actamat.2012.04.006 Zhang, 2019, Microstructure and mechanical property improvement in laser-welded TC4 titanium alloy and 301L stainless steel joints without filler metal, J. Mater. Eng. Perform., 28, 140, 10.1007/s11665-018-3753-4 Zhu, 2019, Solidification behavior and grain morphology of laser additive manufacturing titanium alloys, J. Alloys Compd., 777, 712, 10.1016/j.jallcom.2018.11.055 Wauthle, 2015, Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures, Addit. Manuf, 5, 77 Akamatsu, 2016, In situ observation of solidification patterns in diffusive conditions, Acta Mater., 108, 325, 10.1016/j.actamat.2016.01.024 Asgarian, 2019, Investigation of positron annihilation lifetime and magnetic properties of Co1-xCuxFe2O4 nanoparticles, Mater. Res. Express, 6, 10.1088/2053-1591/aae55d Smilgies, 2009, Scherrer grain-size analysis adapted to grazing-incidence scattering with area detectors, J. Appl. Crystallogr., 42, 1030, 10.1107/S0021889809040126 Bermingham, 2015, Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions, Acta Mater., 91, 289, 10.1016/j.actamat.2015.03.035 Xu, 2020, Microstructural tailoring of as-selective laser melted Ti6Al4V alloy for high mechanical properties, J. Alloy. Compd, 816, 10.1016/j.jallcom.2019.152536 Tan, 2015, Graded microstructure and mechanical properties of additive manufactured Ti–6Al–4V via electron beam melting, Acta Mater., 97, 1, 10.1016/j.actamat.2015.06.036 Yao, 2016, Influence of heat-treatment on the dynamic behavior of 3D laser-deposited Ti–6Al–4V alloy, Mater. Sci. Eng. A, 677, 153, 10.1016/j.msea.2016.09.036 Tang, 2020, Activation volume dominated diffusivity of Ni50Al50 melt under extreme conditions, Comput. Mater. Sci., 171, 10.1016/j.commatsci.2019.109263 Sun, 2012, Strong static magnetic field processing of metallic materials: a review, Curr. Opin. Solid State Mater. Sci., 16, 254, 10.1016/j.cossms.2012.08.001 Fujii, 2011, Diffusion of carbon in iron under magnetic fields, Phys. Rev. B, 83, 10.1103/PhysRevB.83.054412 Rafi, 2013, Microstructures and mechanical properties of Ti6Al4V parts fabricated by selective laser melting and electron beam melting, J. Mater. Eng. Perform., 22, 3872, 10.1007/s11665-013-0658-0 Zhai, 2015, Microstructure evolution, tensile properties, and fatigue damage mechanisms in Ti-6Al-4V alloys fabricated by two additive manufacturing techniques, Procedia Eng., 114, 658, 10.1016/j.proeng.2015.08.007 Hrabe, 2013, Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti–6Al–4V) fabricated using electron beam melting (EBM), part 2: energy input, orientation, and location, Mater. Sci. Eng. A, 573, 271, 10.1016/j.msea.2013.02.065 Facchini, 2010, Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders, Rapid Prototyp. J., 16, 450, 10.1108/13552541011083371 Xu, 2015, Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition, Acta Mater., 85, 74, 10.1016/j.actamat.2014.11.028 Simonelli, 2014, Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V, Mater. Sci. Eng. A, 616, 1, 10.1016/j.msea.2014.07.086 Krakhmalev, 2016, Deformation behavior and microstructure of Ti6Al4V manufactured by SLM, Phys. Procedia, 83, 778, 10.1016/j.phpro.2016.08.080 Wilson-Heid, 2017, Quantitative relationship between anisotropic strain to failure and grain morphology in additively manufactured Ti-6Al-4V, Mater. Sci. Eng. A, 706, 287, 10.1016/j.msea.2017.09.017 Cain, 2015, Crack propagation and fracture toughness of Ti6Al4V alloy produced by selective laser melting, Addit. Manuf, 5, 68 Xu, 2015, Ti-6Al-4V additively manufactured by selective laser melting with superior mechanical properties, JOM, 67, 668, 10.1007/s11837-015-1297-8 Qiu, 2013, Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V, Mater. Sci. Eng. A, 578, 230, 10.1016/j.msea.2013.04.099 Leuders, 2013, On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: fatigue resistance and crack growth performance, Int. J. Fatig., 48, 300, 10.1016/j.ijfatigue.2012.11.011 Hollander, 2006, Structural, mechanical and in vitro characterization of individually structured Ti–6Al–4V produced by direct laser forming, Biomaterials, 27, 955, 10.1016/j.biomaterials.2005.07.041 Koike, 2011, Evaluation of titanium alloys fabricated using rapid prototyping technologies—electron beam melting and laser beam melting, Materials, 4, 1776, 10.3390/ma4101776 Leuders, 2014, On the fatigue properties of metals manufactured by selective laser melting – the role of ductility, J. Mater. Res., 29, 1911, 10.1557/jmr.2014.157 Zhao, 2020, A comparative analysis of Inconel 718 made by additive manufacturing and suction casting: microstructure evolution in homogenization, Addit. Manuf., 36 Cao, 2017, Defect, microstructure, and mechanical property of Ti-6Al-4V alloy fabricated by high-power selective laser melting, JOM, 69, 2684, 10.1007/s11837-017-2581-6 DebRoy, 2018, Additive manufacturing of metallic components – process, structure and properties, Prog. Mater. Sci., 92, 112, 10.1016/j.pmatsci.2017.10.001 Donachie, 2000