Corrosion reduction in steam turbine blades using nano-composite coating

Aal, 2007, Novel composite coatings containing (TiC–Al2O3) powder, Mater. Sci. Eng. A, 447, 87, 10.1016/j.msea.2006.10.036 Abed Janabi, 2021, Increasing of the corrosion resistance by preparing the trivalent nickel complex, Egypt. J. Chem., 10.21608/ejchem.2021.100733.4683 Abed, 2022, Study the effect of adding zirconia particles to nickel–phosphorus electroless coatings as product innovation on stainless steel substrate, Open Eng., 12, 1038, 10.1515/eng-2022-0364 Abi-Akar, 2000, A test method to evaluate high temperature corrosion, Corrosion Antar, 2021, Comparative investigation of scratch resistance and tribological performance of Ni–B–TiO2 composite coatings prepared by conventional and novel processing methods, Ceram. Int., 47, 14438, 10.1016/j.ceramint.2021.02.023 Branko, 2000, The influence of the contact surface roughness on the static friction coefficient, Tribol. Ind., 22, 41 Camargo, 2016, Ultrasound assisted electrodeposition of Zn and Zn-TiO2 coatings, Electrochim. Acta, 198, 287, 10.1016/j.electacta.2016.03.078 Chen, 2010, Electrodeposition of sol-enhanced nanostructured Ni-TiO2 composite coatings, Surf. Coat. Technol., 204, 2487, 10.1016/j.surfcoat.2010.01.036 Dawood, 2020, Investigation corrosion and wear behavior of nickel-nano silicon carbide on stainless steel 316L, Mater. Sci. Forum, 1002, 33, 10.4028/www.scientific.net/MSF.1002.33 Gadhari, 2016, Effect of TiO2 particles on micro-hardness, corrosion, wear and friction of Ni–P–TiO2 composite coatings at different annealing temperatures, Surf. Rev. Lett., 23, 10.1142/S0218625X15500821 Ger, 2004, Electrochemical deposition of nickel/SiC composites in the presence of surfactants, Mater. Chem. Phys., 87, 67, 10.1016/j.matchemphys.2004.04.022 Gnjidić, 2001, The influence of SiC particles on the compressive properties of metal matrix composites, Mater. Charact., 47, 129, 10.1016/S1044-5803(01)00161-9 Gu, 2004, Preparation and characterization of hydrophobic organic–inorganic composite thin films of PMMA/SiO2/TiO2 with low friction coefficient, Appl. Surf. Sci., 221, 129, 10.1016/S0169-4332(03)00865-1 Gül, 2012, Effect of particle concentration on the structure and tribological properties of submicron particle SiC reinforced Ni metal matrix composite (MMC) coatings produced by electrodeposition, Appl. Surf. Sci., 258, 4260, 10.1016/j.apsusc.2011.12.069 Gupta, 2011, A review of TiO2 nanoparticles, Chin. Sci. Bull., 56, 1639, 10.1007/s11434-011-4476-1 Hu, 2006, Equivalent circuit modelling of Ni–SiC electrodeposition under ramp-up and ramp-down waveforms, Mater. Chem. Phys., 99, 424, 10.1016/j.matchemphys.2005.11.015 Jasim, 2023, Identify and investigation corrosion behavior of electroless composite coating on steel substrate, Open Eng., 10.1515/eng-2022-0472 Jonas, 1985, Steam turbine corrosion, Mater. Perform., 24, 9 Jonas, O., Machemer, L., 2008. Steam Turbine Corrosion and Deposits--Problems and Solutions. In: Proceedings of the 37th Turbomachinery Symposium. Kılıç, 2013, Effect of CTAB concentration in the electrolyte on the tribological properties of nanoparticle SiC reinforced Ni metal matrix composite (MMC) coatings produced by electrodeposition, Colloids Surf. A Physicochem. Eng. Asp., 419, 53, 10.1016/j.colsurfa.2012.11.048 Lampke, 2006, Details of crystalline growth in co-deposited electroplated nickel films with hard (nano) particles, Appl. Surf. Sci., 253, 2399, 10.1016/j.apsusc.2006.04.060 LeBozec, 2008, Accelerated corrosion tests in the automotive industry: a comparison of the performance towards cosmetic corrosion, Mater. Corros., 59, 889, 10.1002/maco.200804168 Lelevic, 2019, Electrodeposition of NiP composite coatings: a review, Surf. Coat. Technol., 378, 10.1016/j.surfcoat.2019.07.027 Mazur, 2016, Functional photocatalytically active and scratch resistant antireflective coating based on TiO2 and SiO2, Appl. Surf. Sci., 380, 165, 10.1016/j.apsusc.2016.01.226 Mokabber, 2013, Effect of electroplating parameters on properties of Zn–nano-TiO2 composite coatings, Surf. Eng., 29, 41, 10.1179/1743294412Y.0000000077 Mukhopadhyay, 1998, An investigation of the failure of low pressure steam turbine blades, Eng. Fail. Anal., 5, 181, 10.1016/S1350-6307(98)00016-8 Radhi, 2018, Investigation biomedical corrosion of implant alloys in physiological environment, Int. J. Mech. Production Eng. Res. Dev., 8 Radhi, 2022, Preparation And Investigation A Hydroxyapatite Layer Coating On Titanium Substrate For Surgical Implants, Journal of Rajesh, 2019, Structural, optical, mechanical and dielectric properties of titanium dioxide doped PVA/PVP nanocomposite, J. Polym. Res., 26, 1, 10.1007/s10965-019-1762-0 Shanaghi, 2009, Corrosion protection of mild steel by applying TiO2 nanoparticle coating via sol-gel method, Prot. Met. Phys. Chem, 45, 305, 10.1134/S2070205109030071 Shao, 2012, Mechanical and corrosion resistance properties of TiO2 nanoparticles reinforced Ni coating by electrodeposition, IOP Conf. Ser.: Mater. Sci. Eng., 40, 12043, 10.1088/1757-899X/40/1/012043 Song, 2017, Effects of nanoparticles on the corrosion resistance of fluoropolymer coatings on mild steel, Surf. Eng., 33, 451, 10.1080/02670844.2016.1236226 Strušnik, 2022, Integration of machine learning to increase steam turbine condenser vacuum and efficiency through gasket resealing and higher heat extraction into the atmosphere, Int. J. Energy Res., 46, 3189, 10.1002/er.7375 Sun, L., Berndt, C. C., Gross, K.A., 2001. Characterization and mechanical properties of flame sprayed hydroxyapatite/polymer composite coatings. In: ITSC2001, pp. 321–326. Szczygieł, 2005, Composite Ni/Al2O3 coatings and their corrosion resistance, Electrochim. Acta, 50, 4188, 10.1016/j.electacta.2005.01.040 Thiemig, 2007, Influence of pulse plating parameters on the electrocodeposition of matrix metal nanocomposites, Electrochim. Acta, 52, 7362, 10.1016/j.electacta.2007.06.009 Vedran, 2022, Exergy analysis of a complex four-cylinder steam turbine, Mach. Technol. Mater., 16, 3 Zhang, Y., Witman, J.C., 2018. Electro-codeposition of MCrAlY Coatings for Advanced Gas Turbine Applications. Zhao, 2021, Effects of tensile load hold time on the fatigue and corrosion-fatigue behavior of turbine blade materials, Int. J. Fatigue, 152, 10.1016/j.ijfatigue.2021.106448