Corrosion behavior of palladium–silver–copper alloys in model saliva

Wataha, 1995, Correlation between cytotoxicity and the elements released by dental casting alloys, Int J Prosthodont, 8, 9 Wataha, 1999, Initial versus subsequent release of elements from dental casting alloys, J Oral Rehab, 26, 798, 10.1046/j.1365-2842.1999.00455.x Tufekci, 2002, Inductively coupoled plasma-mass spectroscopy measurements of elemental release from 2 high-palladium dental casting alloys into a corrosion testing medium, J Prosthet Dent, 87, 80, 10.1067/mpr.2002.121238 Syverud, 2001, Corrosion and biocompatibility testing of palladium alloy castings, Dent Mater, 17, 7, 10.1016/S0109-5641(00)00033-6 Wohrl, 2001, Copper allergy revisited, J Am Acad Dermatol, 45, 863, 10.1067/mjd.2001.117729 Wrangsjo, 2001, Occupational dermatitis in dental personnel: contact dermatitis with special reference to (meth)acrylates in 174 patients, Contact Dermatitis, 45, 158, 10.1034/j.1600-0536.2001.045003158.x Raub, 1955, Silver–palladium–copper alloys, Zeitschrift fuer Metallkunde, 46, 52 Meyer, 1995, Electrochemical determination of the corrosion resistance of noble dental casting alloys, J Mater Sci: Mater Med, 6, 534 Mezger, 1985, Corrosion resistance of three high-palladium alloys, Dent Mater, 1, 177, 10.1016/S0109-5641(85)80013-0 Sarkar, 2000, Dealloying and electroformation in high-Pd dental alloys, Dent Mater, 16, 374, 10.1016/S0109-5641(00)00045-2 Cai, 1999, In vitro corrosion resistance of high-palladium dental casting alloys, Dent Mater, 15, 202, 10.1016/S0109-5641(99)00037-8 Pinasco, 2000, Reliability of Pd-based dental alloys regarding to corrosion resistance and production processes, J Mater Sci: Mater Med, 11, 837 Endo, 2003, Electrochemical and surface studies on the passivity of a dental Pd-based casting alloy in alkaline sulphide solution, Corros Sci, 45, 1491, 10.1016/S0010-938X(02)00247-0 Sun, 2002, Electrochemical impedance spectroscopy study of high-palladium dental alloys. Part I. Behavior at open-circuit potencial, J Mater Sci: Mater Med, 13, 435 O’Brien, 1988, Tarnish and corrosion behavior of palladium–silver alloys, J Mater Sci, 23, 3563, 10.1007/BF00540496 Niemi, 1986, An electrochemical and multispectroscopic study of corrosion of silver–palladium–copper–gold alloys, J Dent Res, 65, 888, 10.1177/00220345860650060401 Gniewek, 1978, The effect of noble metal additions upon the corrosion of copper: an Auger-spectroscopy study, J Electrochem Soc, 125, 17, 10.1149/1.2131389 Goehlich, 1990, Corrosion behavior of palladium–copper and palladium–cobalt alloys in synthetic saliva, Dent Mater, 6, 103, 10.1016/S0109-5641(05)80039-9 Bessing, 1987, Potentiodynamic polarization analysis of low-gold and silver-palladium alloys in three different media, Dent Mater, 3, 153, 10.1016/S0109-5641(87)80049-0 ISO 8891:1998. Dental casting alloys with noble metal content of at least 25% but less than 75%. ISO, 1998. ISO 1562:2004. Dentistry—Casting gold alloys. ISO, 2004. Marek, 1997, The effect of tin in the Ag–Hg phase of dental amalgam on dissolution of mercury, Dent Mater, 13, 353, 10.1016/S0109-5641(97)80106-6 Silhova M. Influence of copper on corrosion behaviour of dental alloys [Diploma Thesis]. Prague: ICT, 2002. Voňka, 1995, Calculation of chemical equilibria in heterogeneous multicomponent systems, Calphad, 19, 25, 10.1016/0364-5916(95)00004-X Voňka, 1998, On the calculation of ionic equilibria using the Gibbs energy minimization method, Metall Mater Trans B, 29B, 1372, 10.1007/s11663-998-0061-7 Predel, 2003 Chang, 1977, Phase diagrams and thermodynamic properties of ternary copper-silver systems, J Phys Chem Ref Data, 6, 621, 10.1063/1.555555 Ghosh, 1999, Thermodynamic modeling of the Pd–X (X=Ag, Co, Fe, Ni) systems, J Phase Equlib, 20, 295, 10.1361/105497199770335811 Witusiewicz, 2004, The Ag–Al–Cu system Part I: reassessment of the constituent binaries on the basis of new experimental data, J Alloys Compd, 385, 133 Wagman, 1982, The NBS tables of chemical thermodynamic properties, J. Phys. Chem. Ref. Data, 11 Joska, 2005, The mechanism of corrosion of palladium–silver binary alloys in artificial saliva, Biomaterials, 26, 1605, 10.1016/j.biomaterials.2004.05.018 Beverskog, 1997, Revised Pourbaix diagrams for copper at 25–300°C, J Electrochem Soc, 144, 3476, 10.1149/1.1838036 Davies, 1985, Aqueous solutions of dilute and concentrated electrolytes Yontchev, 1986, Studies of individuals with orofacial discomfort complaints. An investigation of a group of patients who related their sufferings to effects of dental materials and constructions, Swed Dent J Suppl, 38, 1 Muller, 1990, Electrical potentials of restorations in subjects without oral complaints, J Oral Rehabil, 17, 419, 10.1111/j.1365-2842.1990.tb01413.x Joska, 2002, Corrosion processes leading to the development of metallic pigmentation of the gingiva, Czech Stomatol, 102, 197 Silver economics, metallurgy and use. Princeton: D. van Nostrand Co., 1967. Hansen, 1958 Elliot, 1965 NIST standard reference database 20, version 3.4 (Web Version). In: NIST X-ray Photoelectron Spectroscopy Database, 2003. SeriesVolume 1, The elements & native oxides. In: Handbooks of monochromatic XPS spectra; Mountain View: XPS International, 2005. CRC, 2004 Figueroa, 1986, Electrochemical behavior of copper in potassium thiocyanate-I. Dissolution, passivation and pitting processes, Electrochim Acta, 31, 671, 10.1016/0013-4686(86)87034-7 Figueroa, 1987, Electrochemical behavior of copper in potassium thiocyanate solution. II. Analysis of potentiostatic current transients, Electrochim Acta, 32, 231, 10.1016/0013-4686(87)85029-6