Correlation between the viscoelastic properties and cracking potential of engineered cementitious composites

Li, 1998, Engineered cementitious composites for structural applications, J Mater Civil Eng, 10, 66, 10.1061/(ASCE)0899-1561(1998)10:2(66) Li, 1994, On the shear behavior of engineered cementitious composites, Adv Cem Based Mater, 1, 142, 10.1016/1065-7355(94)90045-0 Li, 1998, ECC—tailored composites through micromechanical modeling, 64 Li, 2002, Advances in ECC research, ACI special publication on concrete: material science to applications, 206–23, 373 Sahmaran, 2009, Durability properties of micro-cracked ECC containing high volumes fly ash, Cem Concr Res, 39, 1033, 10.1016/j.cemconres.2009.07.009 Lepech, 2009, Application of ECC for bridge deck link slabs, Mater Struct, 42, 1185, 10.1617/s11527-009-9544-5 Kim, 2004, Performance of bridge deck link slabs designed with ductile engineered cementitious composites, ACI Struct J, 101, 792 Kim, 2004, Mechanical performance of sprayed engineered cementitious composite using wet-mix shotcreting process for repair, ACI Mater J, 101, 42 Qian, 2006, Influence of concrete material ductility on shear response of stud connections, ACI Mater J, 103, 60 Lim, 1997, Durable repair of aged infrastructures using trapping mechanism of engineered cementitious composites, Cem Concr Compos, 19, 373, 10.1016/S0958-9465(97)00026-7 Li, 2006, Behavior of ECC/concrete layered repair system under drying shrinkage conditions, J Restor Build Monum, 12, 143 Li, 2011, High-early-strength ECC for rapid durable repair – material properties, ACI Mater J, 108, 3 Zhang, 2002, Introducing ductile strip for durability enhancement of concrete slabs, J Mater Civ Eng, 14, 253, 10.1061/(ASCE)0899-1561(2002)14:3(253) Rizzo, 1989, Selection criteria for concrete repair materials, Concr Int, 11, 46 Emmons, 1993, A rational approach to durable concrete repairs, Concr Int, 15, 40 Mangat, 1995, Repair material properties which influence long-term performance of concrete structures, Constr Build Mater, 9, 81, 10.1016/0950-0618(94)00003-K Morgan, 1996, Compatibility of concrete repair materials systems, Constr Build Mater, 10, 51, 10.1016/0950-0618(95)00060-7 Decter, 1997, Durable concrete repair – importance of compatibility and low shrinkage, Constr Build Mater, 11, 267, 10.1016/S0950-0618(97)00047-0 Emmons, 2000, Selecting durable repair materials: performance criteria, Concr Int, 22, 38 Poston, 2001, Concrete repair material performance—laboratory study, ACI Mater J, 98, 137 Li, 2004, High performance fiber reinforced cementitious composites as durable material for concrete structure repair, Int J Restor Build Monum, 10, 163 Li VC, Stang H. Elevating FRC material ductility to infrastructure durability. In: Proceedings of 6th international RILEM symposium on fibre-reinforced concretes (BEFIB’2004). Varenna, Lake Como, Italy; 2004. Li, 2009, Influence of material ductility on the performance of concrete repair, ACI Mater J, 106, 419 Sahmaran, 2009, Internal curing of engineered cementitious composites for prevention of early age autogenous shrinkage cracking, Cem Concr Res, 39, 893, 10.1016/j.cemconres.2009.07.006 Keskin, 2013, Effect of pre-soaked expanded perlite aggregate on the dimensional stability and mechanical properties of ECC, J Mater Civ Eng, 25, 763, 10.1061/(ASCE)MT.1943-5533.0000553 Boshoff, 2007, Time-dependent response of ECC: characterisation of creep and rate dependence, Cem Concr Res, 37, 725, 10.1016/j.cemconres.2007.02.001 Boshoff, 2009, Characterising the time-dependant behaviour on the single fibre level of SHCC: Part 1: Mechanism of fibre pull-out creep, Cem Concr Res, 39, 779, 10.1016/j.cemconres.2009.06.007 Boshoff, 2009, Characterising the time-dependant behaviour on the single fibre level of SHCC: Part 2: The rate effects on fibre pull-out tests, Cem Concr Res, 39, 787, 10.1016/j.cemconres.2009.06.006 Boshoff, 2013, Effect of sustained tensile loading on SHCC crack widths, Cem Concr Res, 37, 119, 10.1016/j.cemconcomp.2012.11.009 Li, 2006, Integrated structures and materials design, Mater Struct, 40, 387, 10.1617/s11527-006-9146-4 Lin, 1999, On interface property characterization and performance of fiber reinforced cementitious composites, Concr Sci Eng, 1, 173 Yang, 2007, Numerical study on steady- state cracking of composites, Compos Sci Technol, 67, 151, 10.1016/j.compscitech.2006.07.012 Wongtanakitcharoen, 2007, Unrestrained early age shrinkage of concrete with polyproplene, PVA, and carbon fibers, Mater Struct, 40, 289, 10.1617/s11527-006-9106-z Wei, 2011, Unified shrinkage model for concrete from autogenous shrinkage test on paste with and without ground-granulated blast-furnace slag, ACI Mater J, 108, 13 Keskin SB. Dimensional stability of engineered cementitios composites. Ph D Thesis. Ankara, Middle East Technical University, 2012. AASHTO PP 34–99. Standard practice for estimating the cracking tendency of concrete. Washington, DC: American Association of State Highway and Transportation Officials, 1999. Neville, 2003 Roy, 1983, Hydration, structure, and properties of blast furnace slag cements, mortars, and concrete, ACI J, 79, 445 Qian, 2007, Simplified inverse method for determining the tensile strain capacity of strain hardening cementitious composites, J Adv Concr Technol, 5, 235, 10.3151/jact.5.235 Qian, 2009, Self-healing behavior of strain hardening cementitious composites incorporating local waste materials, Cem Concr Compos, 31, 613, 10.1016/j.cemconcomp.2009.03.003 Li, 2010, The relationship between autogenous shrinkage and pore structure of cement paste with mineral admixtures, Constr Build Mater, 24, 1855, 10.1016/j.conbuildmat.2010.04.018 Şahmaran, 2007, Development of high volume low-lime and high-lime fly-ash-incorporated self consolidating concrete, Mag Concr Res, 59, 97, 10.1680/macr.2007.59.2.97 Zhang, 1995, Microstructure, crack propagation, and mechanical properties of cement pastes containing high volumes of fly ashes, Cem Concr Res, 25, 1165, 10.1016/0008-8846(95)00109-P Bisaillon, 1994, Performance of high-volume fly ash concrete in large experimental monoliths, ACI Mater J, 91, 178 ASTM C1581. Standard test method for determining age at cracking and induced tensile stress characteristics of mortar and concrete under restrained shrinkage. West Conshohocken (PA): American Society for Testing and Materials; 2009. Mehta, 2006 Ward, 1969, The mechanism of tensile creep in concrete, Mag Concr Res, 21, 151, 10.1680/macr.1969.21.68.151 Bissonnette, 2007, Tensile creep of concrete: study of its sensitivity to basic parameters, ACI Mater J, 104, 360 D’Ambrosia, 2004, Measurement and modeling of concrete tensile creep and shrinkage at early age, ACI Spec Publ, 2004, 99