Correlation between tensile properties, microstructure, and processing routes of an Al–Cu–Mg–Ag–TiB2 (A205) alloy: Additive manufacturing and casting

Gao, 2019, Stabilizing nanoprecipitates in Al-Cu alloys for creep resistance at 300° C, Mater. Res. Lett., 7, 18, 10.1080/21663831.2018.1546773 Ravkov, 2021, The role of cooling rate on microstructure in a sand-cast Al-Cu–Ag alloy containing high amounts of TiB2, Canad. Metallurg. Quart., 1 Indriyati, 2016 Zamani, 2020, Study on dissolution of Al2Cu in al-4.3 cu and a205 cast alloys, Metals, 10, 900, 10.3390/met10070900 Hekmat-Ardakan, 2012, Microstructural evolution and mechanical properties of as-cast and T6-treated AA2195 DC cast alloy, Mater. Sci. Eng., A, 558, 76, 10.1016/j.msea.2012.07.075 Kordijazi, 2021, Effect of solidification time on microstructure, wettability, and corrosion properties of A205-T7 aluminum alloys, Int. J. Metalcast., 15, 2, 10.1007/s40962-020-00457-8 Shakil, 2022, Ambient-temperature time-dependent deformation of cast and additive manufactured Al-Cu-Mg-Ag-TiB2 (A205), Micron, 10.1016/j.micron.2022.103246 Biffi, 2021, Selective laser melting of AlCu-TiB2 alloy using pulsed wave laser emission mode: processability, microstructure and mechanical properties, Mater. Des., 204, 109628, 10.1016/j.matdes.2021.109628 Li, 2017, Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility, Acta Mater., 129, 183, 10.1016/j.actamat.2017.02.062 Xi, 2020, Grain refinement in laser manufactured Al-based composites with TiB2 ceramic, J. Mater. Res. Technol., 9, 2611, 10.1016/j.jmrt.2020.04.059 Jia, 2019, Selective laser melting of a high strength AlMnSc alloy: alloy design and strengthening mechanisms, Acta Mater., 171, 108, 10.1016/j.actamat.2019.04.014 Ghoncheh, 2021, On the microstructure and solidification behavior of new generation additively manufactured Al-Cu-Mg-Ag-Ti-B alloys, Addit. Manuf., 37, 101724 Mair, 2021, Laser powder bed fusion of nano-CaB6 decorated 2024 aluminum alloy, J. Alloys Compd., 863, 158714, 10.1016/j.jallcom.2021.158714 Mair, 2021, Microstructure and mechanical properties of a TiB2-modified Al–Cu alloy processed by laser powder-bed fusion, Mater. Sci. Eng., A, 799, 140209, 10.1016/j.msea.2020.140209 Nie, 2019, On the role of Zr content into Portevin-Le Chatelier (PLC) effect of selective laser melted high strength Al-Cu-Mg-Mn alloy, Mater. Lett., 248, 5, 10.1016/j.matlet.2019.03.112 Zhang, 2017, Effect of Zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy, Scripta Mater., 134, 6, 10.1016/j.scriptamat.2017.02.036 Hu, 2021, Aging responses of an Al-Cu alloy fabricated by selective laser melting, Addit. Manuf., 37, 101635 Shakil, 2022, Microstructural-micromechanical correlation in an Al–Cu–Mg–Ag–TiB2 (A205) alloy: additively manufactured and cast, Mater. Sci. Eng., A, 832, 142453, 10.1016/j.msea.2021.142453 Xiao, 2022, Enhancing strength and ductility of AlSi10Mg fabricated by selective laser melting by TiB2 nanoparticles, J. Mater. Sci. Technol., 109, 254, 10.1016/j.jmst.2021.08.030 Ben, 2020, Heterogeneous microstructure and voids dependence of tensile deformation in a selective laser melted AlSi10Mg alloy, Mater. Sci. Eng., A, 798, 140109, 10.1016/j.msea.2020.140109 Wu, 2020, An overview of tailoring strain delocalization for strength-ductility synergy, Prog. Mater. Sci., 113, 100675, 10.1016/j.pmatsci.2020.100675 Xue, 2021, Improving the strength-ductility trade-off of TiB2/Al-4.5% Cu composites via Mg–Ag microalloying and multi-step heat treatment, Mater. Res. Express, 8, 10.1088/2053-1591/ac0264 Chen, 2020, Stress aging of Al–Cu–Mg–Ag single crystal: the effect of the loading orientations, J. Alloys Compd., 816, 152635, 10.1016/j.jallcom.2019.152635 Mei, 2021, Effects of yttrium additions on microstructures and mechanical properties of cast Al-Cu-Mg-Ag alloys, J. Alloys Compd., 870, 159435, 10.1016/j.jallcom.2021.159435 Deng, 2021, Precipitation strengthening of stress-aged Al-Cu-Mg-Ag alloy single crystals, Mater. Sci. Eng., A, 141458, 10.1016/j.msea.2021.141458 Bai, 2019, On the role of the solute partitioning and chemistry in initial precipitation of Ω plates, Mater. Sci. Eng., A, 766, 138339, 10.1016/j.msea.2019.138339 Bai, 2017, Quantitative transmission electron microscopy and atom probe tomography study of Ag-dependent precipitation of Ω phase in Al-Cu-Mg alloys, Mater. Sci. Eng., A, 687, 8, 10.1016/j.msea.2017.01.045 Gariboldi, 2017, Presence of silver in the strengthening particles of an Al-Cu-Mg-Si-Zr-Ti-Ag alloy during severe overaging and creep, Acta Mater., 125, 50, 10.1016/j.actamat.2016.11.056 Liu, 2020, The effect of Ag element on the microstructure characteristic evolution of an Al–Cu–Li–Mg alloy, J. Mater. Res. Technol., 9, 11121, 10.1016/j.jmrt.2020.08.021 Ma, 2017, Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals, Mater. Today, 20, 323, 10.1016/j.mattod.2017.02.003 Wang, 2002, High tensile ductility in a nanostructured metal, Nature, 419, 912, 10.1038/nature01133 Gazizov, 2017, Precipitation structure and strengthening mechanisms in an Al-Cu-Mg-Ag alloy, Mater. Sci. Eng., A, 702, 29, 10.1016/j.msea.2017.06.110 Zhan, 2018, Effect of process parameters on fatigue and fracture behavior of Al-Cu-Mg alloy after creep aging, Metals, 8, 298, 10.3390/met8050298 Raffeis, 2020, Characterising the microstructure of an additively built Al-Cu-Li alloy, Materials, 13, 5188, 10.3390/ma13225188 Yang, 2021, Effect of the addition of high Li concentration on the microstructure and mechanical properties of Al–Mg–Si alloys with different Mg contents, Acta Metall. Sin., 1 Jiang, 2021, Effects of quenching rate and over-aging on microstructures, mechanical properties and corrosion resistance of an Al–Zn–Mg (7046A) alloy, J. Alloys Compd., 854, 157272, 10.1016/j.jallcom.2020.157272 Geng, 2019, Tuning the microstructure features of in-situ nano TiB2/Al-Cu-Mg composites to enhance mechanical properties, J. Alloys Compd., 775, 193, 10.1016/j.jallcom.2018.10.078 Wang, 2020, Premature failure of an additively manufactured material, NPG Asia Mater., 12, 1, 10.1038/s41427-020-0212-0 Kacher, 2014, Dislocation interactions with grain boundaries, Curr. Opin. Solid State Mater. Sci., 18, 227, 10.1016/j.cossms.2014.05.004 Shao, 2019, Architecture of high-strength aluminum–matrix composites processed by a novel microcasting technique, NPG Asia Mater., 11, 1, 10.1038/s41427-019-0174-2