Control strategies for integration of thermal energy storage into buildings: State-of-the-art review

Henze, 2004, Evaluation of optimal control for active and passive building thermal storage, Int. J. Therm. Sci., 43, 173, 10.1016/j.ijthermalsci.2003.06.001 Cole, 2012, Optimization and advanced control of thermal energy storage systems, Rev. Chem. Eng., 28, 81 Soares, 2013, Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency, Energy Build., 59, 82, 10.1016/j.enbuild.2012.12.042 Sun, 2013, Peak load shifting control using different cold thermal energy storage facilities in commercial buildings: a review, Energy Convers. Manage., 71, 101, 10.1016/j.enconman.2013.03.026 Pintaldi, 2015, A review of thermal energy storage technologies and control approaches for solar cooling, Renew. Sustain. Energy Rev., 41, 975, 10.1016/j.rser.2014.08.062 ASHRAE, 2011 Afram, 2014, Theory and applications of HVAC control systems – a review of model predictive control (MPC), Build. Environ., 72, 343, 10.1016/j.buildenv.2013.11.016 Lin, 2005, Experimental study of under-floor electric heating system with shape-stabilized PCM plates, Energy Build., 37, 215, 10.1016/j.enbuild.2004.06.017 Powell, 2011, Control of a large scale solar thermal energy storage system Mawire, 2008, Experimental characterisation of a thermal energy storage system using temperature and power controlled charging, Renew. Energy, 33, 682, 10.1016/j.renene.2007.04.021 Visioli, 2006 LeBreux, 2009, Control of a hybrid solar/electric thermal energy storage system, Int. J. Therm. Sci., 48, 645, 10.1016/j.ijthermalsci.2008.05.006 Wang, 2008, Supervisory and optimal control of building HVAC systems: a review, HVAC&R Res., 14, 3, 10.1080/10789669.2008.10390991 Farahani, 2006, Case study of design and implementation of a thermal energy storage system Bolton, 2009 Camacho, 1999 Garcia, 1989, Moedel predictive control: theory and practice – a survey, Automation, 25, 335, 10.1016/0005-1098(89)90002-2 May-Ostendorp, 2011, Model-predictive control of mixed-mode buildings with rule extraction, Build. Environ., 46, 428, 10.1016/j.buildenv.2010.08.004 Cole, 2014, Reduced-order residential home modeling for model predictive control, Energy Build., 74, 69, 10.1016/j.enbuild.2014.01.033 Ma, 2012, Model predictive control for the operation of building cooling systems, Trans. Control Syst. Technol., 20, 796, 10.1109/TCST.2011.2124461 Greensfelder, 2011, An investigation of optimal control of passive building thermal storage with real time pricing, J. Build. Perform. Simul., 4, 91, 10.1080/19401493.2010.494735 Ma, 2012, Demand reduction in building energy systems based on economic model predictive control, Chem. Eng. Sci., 67, 92, 10.1016/j.ces.2011.07.052 Hajiah, 2012, Optimal control of building storage systems using both ice storage and thermal mass: Part I. Simulation environment, Energy Convers. Manage., 64, 499, 10.1016/j.enconman.2012.02.016 Hajiah, 2012, Optimal controls of building storage systems using both ice storage and thermal mass: Part II. Parametric analysis, Energy Convers. Manage., 64, 509, 10.1016/j.enconman.2012.02.020 Candanedo, 2011, Predictive control of radiant floor heating and solar-source heat pump operation in a solar house, HVAC&R Res., 17, 235, 10.1080/10789669.2011.568319 Oldewurtel, 2012, Use of model predictive control and weather forecasts for energy efficient building climate control, Energy Build., 45, 15, 10.1016/j.enbuild.2011.09.022 Sakellariou, 2011 Wetter, 2009, Modelica-based modeling and simulation to support research and development in building energy and controls systems, J. Build. Perform. Simul., 2, 143, 10.1080/19401490902818259 Wetter, 2011, Recent developments of the modelica “buildings” library for building energy and control systems Coffey, 2010, A software framework for model predictive control with GenOpt, Energy Build., 42, 1084, 10.1016/j.enbuild.2010.01.022 Vinter, 2010 Kirk, 1971 Krarti, 1996 Henze, 1997, Development of a predictive optimal controller for thermal energy storage systems, HVAC&R Res., 3, 233, 10.1080/10789669.1997.10391376 Braun, 2007, Impact of control on operating costs for cool storage systems with dynamic electric rates, ASHRAE Trans., 113, 343 Zhang, 2011, Methodology for determining the optimal operation strategies for a chilled-water-storage system: Part I. Theoretical model, HVAC&R Res., 17, 737 Zhang, 2011, Methodology for determining the optimal operating strategies for a chilled-water-storage system: Part II. Project application, HVAC&R Res., 17, 751 Braun, 1992, A comparison of chiller-priority, storage-priority, and optimal control of an ice system, ASHRAE Trans., 98, 893 Henze, 2007 Cheng, 2008, Evaluation of the primary factors impacting the optimal control of passive thermal storage (RP1313), ASHRAE Trans., 114, 57 Silva, 1995 Wang, 1995 Landau, 1979 Yan, 2008, Adaptive optimal control model for building cooling and heating sources, Energy Build., 40, 1394, 10.1016/j.enbuild.2008.01.003 Wang, 1998, Dynamic simulation of a building central chilling system and evaluation of EMCS on-line control strategies, Build. Environ., 33, 1, 10.1016/S0360-1323(97)00019-X Liu, 2006, Experimental analysis of simulated reinforcement learning control for active and passive building thermal storage inventory: Part 1. Theoretical foundation, Energy Build., 38, 142, 10.1016/j.enbuild.2005.06.002 Liu, 2006, Experimental analysis of simulated reinforcement learning control for active and passive building thermal storage inventory: Part 2. Results and analysis, Energy Build., 38, 148, 10.1016/j.enbuild.2005.06.001 Yu, 2010, A decision tree method for building energy demand modeling, Energy Build., 42, 1637, 10.1016/j.enbuild.2010.04.006 Liang, 2005, Thermal comfort control based on neural network for HVAC application Massie, 2002, Optimization of a building's cooling plant for operating cost and energy use, Int. J. Therm. Sci., 41, 1121, 10.1016/S1290-0729(02)01398-4 Passino, 1998 LeBreux, 2006, Fuzzy and feedforward control of an hybrid thermal energy storage system, Energy Build., 38, 1149, 10.1016/j.enbuild.2006.02.005 Sutton, 1998 Henze, 2003, Evaluation of reinforcement learning control for thermal energy storage systems, HVAC&R Res., 9, 259, 10.1080/10789669.2003.10391069 Wu, 2014, A multi-agent-based energy-coordination control system for grid-connected large-scale wind–photovoltaic energy storage power-generation units, Solar Energy, 107, 245, 10.1016/j.solener.2014.05.012 Henze, 1997, A simulation environment for the analysis of ice storage controls, HVAC&R Res., 3, 128, 10.1080/10789669.1997.10391367 Drees, 1996, Development and evaluation of a rule-based control strategy for ice storage systems, HVAC&R Res., 2, 312, 10.1080/10789669.1996.10391352 Shao, 2004, A new inverter heat pump operated all year round with domestic hot water, Energy Convers. Manage., 45, 2255, 10.1016/j.enconman.2003.10.013 Hamada, 2005, Latent heat thermal energy storage tanks for space heating of buildings: comparison between calculations and experiments, Energy Convers. Manage., 46, 3221, 10.1016/j.enconman.2005.03.009 Fernández-Seara, 2013, Experimental analysis of an on demand external domestic hot water production system using four control strategies, Appl. Energy, 103, 85, 10.1016/j.apenergy.2012.10.030 Nkwetta, 2014, Impact of phase change materials types and positioning on hot water tank thermal performance: using measured water demand profile, Appl. Therm. Eng., 67, 460, 10.1016/j.applthermaleng.2014.03.051 Nkwetta, 2014, Phase change materials in hot water tank for shifting peak power demand, Solar Energy, 107, 628, 10.1016/j.solener.2014.05.034 Fazilati, 2013, Phase change material for enhancing solar water heater: an experimental approach, Energy Convers. Manage., 71, 138, 10.1016/j.enconman.2013.03.034 Mazman, 2009, Utilization of phase change materials in solar domestic hot water systems, Renew. Energy, 34, 1639, 10.1016/j.renene.2008.10.016 Canbazoğlu, 2005, Enhancement of solar thermal energy storage performance using sodium thiosulfate pentahydrate of a conventional solar water-heating system, Energy Build., 37, 235, 10.1016/j.enbuild.2004.06.016 Haillot, 2013, Optimization of solar DHW system including PCM media, Appl. Energy, 109, 470, 10.1016/j.apenergy.2012.09.062 Nabavitabatabayi, 2014, Numerical analysis of a thermally enhanced domestic hot water tank, Appl. Energy, 129, 253, 10.1016/j.apenergy.2014.04.081 Cabeza, 2006, Experimentation with a water tank including a PCM module, Solar Energy Mater. Solar Cells, 90, 1273, 10.1016/j.solmat.2005.08.002 Tay, 2012, Experimental investigation of tubes in a phase change thermal energy storage system, Appl. Energy, 90, 288, 10.1016/j.apenergy.2011.05.026 Khalifa, 2013, A storage domestic solar hot water system with a back layer of phase change material, Exp. Therm. Fluid Sci., 44, 174, 10.1016/j.expthermflusci.2012.05.017 Ibáñez, 2006, Modelization of a water tank including a PCM module, Appl. Therm. Eng., 26, 1328, 10.1016/j.applthermaleng.2005.10.022 Tamasauskas, 2012, Modeling and optimization of a solar assisted heat pump using ice slurry as a latent storage material, Solar Energy, 86, 3316, 10.1016/j.solener.2012.08.021 Lin, 2004, Modeling and simulation of under-floor electric heating system with shape-stabilized PCM plates, Build. Environ., 39, 1427, 10.1016/j.buildenv.2004.04.005 Li, 2009, Preparation and application effects of a novel form-stable phase change material as the thermal storage layer of an electric floor heating system, Energy Build., 41, 871, 10.1016/j.enbuild.2009.03.009 Cho, 1999, An experimental study of multiple parameter switching control for radiant floor heating systems, Energy, 24, 433, 10.1016/S0360-5442(98)00101-7 Cho, 2003, Predictive control of intermittently operated radiant floor heating systems, Energy Convers. Manage., 44, 1333, 10.1016/S0196-8904(02)00116-4 Mazo, 2012, Modeling a radiant floor system with Phase Change Material (PCM) integrated into a building simulation tool: analysis of a case study of a floor heating system coupled to a heat pump, Energy Build., 47, 458, 10.1016/j.enbuild.2011.12.022 Pasupathy, 2008, Experimental investigation and numerical simulation analysis on the thermal performance of a building roof incorporating phase change material (PCM) for thermal management, Appl. Therm. Eng., 28, 556, 10.1016/j.applthermaleng.2007.04.016 Pasupathy, 2008, Effect of double layer phase change material in building roof for year round thermal management, Energy Build., 40, 193, 10.1016/j.enbuild.2007.02.016 Osterman, 2012, Review of PCM based cooling technologies for buildings, Energy Build., 49, 37, 10.1016/j.enbuild.2012.03.022 El-Sawi, 2013, Centralized latent heat thermal energy storage system: model development and validation, Energy Build., 65, 260, 10.1016/j.enbuild.2013.05.027 El-Sawi, 2014, Assessing long-term performance of centralized thermal energy storage system, Appl. Therm. Eng., 62, 313, 10.1016/j.applthermaleng.2013.09.047 Raj, 2010, Review on free cooling of buildings using phase change materials, Renew. Sustain. Energy Rev., 14, 2819, 10.1016/j.rser.2010.07.004 Yanbing, 2003, Modeling and experimental study on an innovative passive cooling system – NVP system, Energy Build., 35, 417, 10.1016/S0378-7788(02)00141-X Bruno, 2014, Minimising energy usage for domestic cooling with off-peak PCM storage, Energy Build., 76, 347, 10.1016/j.enbuild.2014.02.069 Parameshwaran, 2013, Energy efficient hybrid nanocomposite-based cool thermal storage air conditioning system for sustainable buildings, Energy, 59, 194, 10.1016/j.energy.2013.06.064 Parameshwaran, 2014, Energy conservative air conditioning system using silver nano-based PCM thermal storage for modern buildings, Energy Build., 69, 202, 10.1016/j.enbuild.2013.09.052 Helm, 2009, Solar heating and cooling system with absorption chiller and low temperature latent heat storage: energetic performance and operational experience, Int. J. Refrig., 32, 596, 10.1016/j.ijrefrig.2009.02.010 Helm, 2014, Solar heating and cooling system with absorption chiller and latent heat storage – a research project summary, Energy Proc., 48, 837, 10.1016/j.egypro.2014.02.097 Agyenim, 2007, The use of phase change material (PCM) to improve the coefficient of performance of a chiller for meeting domestic cooling in Wales Chen, 2008, A new kind of phase change material (PCM) for energy-storing wallboard, Energy Build., 40, 882, 10.1016/j.enbuild.2007.07.002 Shilei, 2006, Eutectic mixtures of capric acid and lauric acid applied in building wallboards for heat energy storage, Energy Build., 38, 708, 10.1016/j.enbuild.2005.10.006 Jin, 2013, On the importance of the location of PCMs in building walls for enhanced thermal performance, Appl. Energy, 106, 72, 10.1016/j.apenergy.2012.12.079 Zwanzig, 2013, Numerical simulation of phase change material composite wallboard in a multi-layered building envelope, Energy Convers. Manage., 69, 27, 10.1016/j.enconman.2013.02.003 Koo, 2011, Effects of wallboard design parameters on the thermal storage in buildings, Energy Build., 43, 1947, 10.1016/j.enbuild.2011.03.038 Evola, 2013, A methodology for investigating the effectiveness of PCM wallboards for summer thermal comfort in buildings, Build. Environ., 59, 517, 10.1016/j.buildenv.2012.09.021 Zhou, 2010, Thermal characteristics of shape-stabilized phase change material wallboard with periodical outside temperature waves, Appl. Energy, 87, 2666, 10.1016/j.apenergy.2010.02.001 Bastani, 2014, Designing building envelope with PCM wallboards: design tool development, Renew. Sustain. Energy Rev., 31, 554, 10.1016/j.rser.2013.12.031 Ascione, 2014, Energy refurbishment of existing buildings through the use of phase change materials: energy savings and indoor comfort in the cooling season, Appl. Energy, 113, 990, 10.1016/j.apenergy.2013.08.045 Alqallaf, 2013, Concrete roof with cylindrical holes containing PCM to reduce the heat gain, Energy Build., 61, 73, 10.1016/j.enbuild.2013.01.041 Xu, 2005, Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings, Energy Build., 37, 1084, 10.1016/j.enbuild.2004.12.016 Entrop, 2011, Experimental research on the use of micro-encapsulated Phase Change Materials to store solar energy in concrete floors and to save energy in Dutch houses, Solar Energy, 85, 1007, 10.1016/j.solener.2011.02.017 Alawadhi, 2012, Using phase change materials in window shutter to reduce the solar heat gain, Energy Build., 47, 421, 10.1016/j.enbuild.2011.12.009 Buddhi, 2003, Thermal performance studies of a test cell having a PCM window in south direction. Annex 17 Silva, 2015, Development of a window shutter with phase change materials: full scale outdoor experimental approach, Energy Build., 88, 110, 10.1016/j.enbuild.2014.11.053 Ismail, 2001, Thermally effective windows with moving phase change material curtains, Appl. Therm. Eng., 21, 1909, 10.1016/S1359-4311(01)00058-8 Kintner-Meyer, 1995, Optimal control of an HVAC system using cold storage and building thermal capacitance, Energy Build., 23, 19, 10.1016/0378-7788(95)00917-M