Nội dung được dịch bởi AI, chỉ mang tính chất tham khảo
Kiểm Soát Thời Gian Vận Hành An Toàn Của Thiết Bị Và Đường Ống Trong Các Cơ Sở Lò Phản Ứng Đang Hoạt Động Hoặc Đang Xây Dựng
Tóm tắt
Các giả định cơ bản để đảm bảo việc vận hành an toàn của các thành phần trong các cơ sở hạt nhân, dựa trên việc kiểm soát các đặc trưng về thời gian phục vụ, được trình bày. Đối với các ống Du300 RBMK-1000, được làm bằng thép austenitic chống ăn mòn, cho thấy công nghệ này có thể được áp dụng hiệu quả trong các đơn vị phát điện đang vận hành. Complex các biện pháp, được phát triển và xác nhận trong vài năm qua, nhằm giám sát và đánh giá trạng thái kỹ thuật của mối hàn trong các đường ống, sử dụng các khái niệm an toàn "rò rỉ trước khi gãy" và "ngăn ngừa hỏng hóc" cũng như các phương pháp nhằm giảm thiểu khả năng hình thành rạn nứt của các mối hàn bằng phương pháp ăn mòn dưới tác động của áp lực, không chỉ cho phép vận hành an toàn của các đường ống Du300 mà còn là cơ sở cho việc tối ưu hóa khối lượng và chu kỳ giám sát không phá hủy trong quá trình vận hành.
Từ khóa
#vận hành an toàn; cơ sở hạt nhân; thép austenitic; giám sát không phá hủy; ăn mònTài liệu tham khảo
V. A. Savchenko, “Conceptual questions concerning the control of the service life of Russian power generating units in nuclear power plants,” Teploénerget., No. 5, 2–8 (2000).
S. E. Bugaenko, V. A. Savchenko, I. N. Denisov, et al., “Control of the service life of a nuclear power plant,” in: Proceedings of the International Conference PLIM + PLEX’99, Madrid, Spain (1999); Preprint INSC-01-01, MTsYaB, Moscow (2001).
S. E. Bugaenko, A. I. Arzhaev, S. V. Evropin, et al., “Control of the service life characteristics of the components of power generating units of nuclear power plants,” At. Énerg. 92, No. 4, 255–261.
S. E. Bugaenko, B. A. Gabaraev, S. V. Evropin, et al., Control of the Service Life of Nuclear Power Plants, Machine Building, Encyclopedia in 40 volumes, Vol. IV-25, Machine Building in Nuclear Technology, Mashinostroenie, Moscow (2005), Part 2, Chap. 8.8, pp. 919–929.
Directive for Controlling the Service Life of the Components of the Power Generating Units in Nuclear Reactors, RD ÉO 0281-01, Rosénergoatom, Moscow (2001).
Manual for Calculating the Strength of Equipment and Pipelines RBMK, VVÉR, and ÉGP Reactor Systems at the Operating Stage, RD 0330-01, Rosénergoatom, Moscow (2004).
Typical Requirements for the Order of Development of a Technical Task, Performing Tests, and Conditions of Use for the Means and Procedures of Operational Nondestructive Monitoring Performed on Objects Using Atomic Energy, RD ÉO 0487-03, Rosénergoatom, Moscow (2003).
Methodological Recommendations for Assessing the Reliability of the Means and Methods of Nondestructive Monitoring, RD ÉO 0488-03, Rosénergoatom, Moscow (2003).
Method of Calculation and Norms for the Admissible Sizes of Defects in Weld Seams in Du300 Pipelines in the Multiple Forces Circulation Loop of RBMK, Rosénergoatom, Moscow (2003).
Application of the Elimination of Failure Concept for Du300 Pipelines and Collectors of the Multiple Forced Circulation Loop and SVB Power Generating Units of Nuclear Power Plants with RBMK-1000 Reactors, RD ÉO 0513-03, Rosénergoatom, Moscow (2004).
Certification of Personnel for Nondestructive and Destructive Monitoring of Equipment and Pipelines, Components, and Structures in Nuclear Power Plants, RD ÉO 0583-2004, Rosénergoatom, Moscow (2005).
Manual for Applying the Leak Before Failure Safety Concept to the Pipelines of Nuclear Power Systems, R-TPR-01-99, RD 95.10547-99.
A. A. Petrov, G. N. Saprykin, S. V. Evropin, et al., “Ensuring safe operation of Du300 pipelines in nuclear power plants with RBMK reactors,” Vopr. At. Nauk. Tekh., Ser. Obespech. Bezopas. AÉS, No. 6, 30–35 (2004).
Unified Methods for Monitoring the Main Materials (Half-Finished Articles), Weld Seams, and Hard-Facing of the Equipment and Pipelines in Nuclear Power Systems: Ultrasonic Monitoring, PNAÉ G-7-014-89, Énergoatomizdat, Moscow (1990).
Improvement of In-Service Inspection in Nuclear Power Plants, IAEA-TECDOC-1400, IAEA, Vienna, July 2004.